November 2008 - mpiwg-tools - mailman3.cels.anl.gov

[Mpi3-tools] First MPI tools TelCon - 8/12, 8am PT, 11am ET, 5pm CET
by Martin Schulz 25 Nov '08

25 Nov '08

Hi all, Based on the feedback that I got, I think Monday is the best day that fits for most (I hope this is correct and doesn't exclude many, but finding a day that fits everybody was - as expected - not possible). As for the time, I think we should stick with 8am Pacific, 11am Eastern, and 5pm Central European Time. This will allow more people from Europe to participate. Also, I doubt that we will be able to provide a local European dial-in number for easy after hours access. At least we at LLNL can't do this - if someone else has the ability to set this up and is willing to host these TelCons, that would of course be great; please let me know. Hence, I suggest that we have our first TelCon for the MPI tools WG on Monday December 8th (a week after Thanksgiving to provide some time for everyone to get this onto their calendars) and then continue (for now) on a bi-weekly basis. We can use the following number: > Toll Free Dial In Number for Offsite Participants: 866-914-3976 > International Access/Caller Paid Dial In Number: 925-424-8105 > Dial In Number for LLNL Onsite Participants: 4-8105 > > Access Security Code: 860609 # I hope this works for everyone - talk to you soon. Happy Thanksgiving, Martin _______________________________________________________________________ Martin Schulz, schulzm(a)llnl.gov, http://people.llnl.gov/schulz6 CASC @ Lawrence Livermore National Laboratory, Livermore, USA

1 0

Re: [Mpi3-tools] Welcome to MPI-Forum WG on Tools / Time for TelCon
by Marty Itzkowitz 25 Nov '08

25 Nov '08

What are the proposed dates and times Pacific Time? Thanks, Marty On 11/25/08 9:05 AM, Hubert Ritzdorf wrote: > Hi, > > 5pm CET is fine for me. 8pm-10pm also. > Any day except Friday 5th December and Thursday 11th. > > Hubert > > Marc-Andre Hermanns wrote: >> Hi Martin, Hi all, >> >> It would be interesting to know who -- other than me -- is calling from >> Europe? >> >> In the first week in December, for me the best day would be Tuesday >> 2nd, if the call is to be at 5 pm CET (as I stay late that day anyway). >> I could make Thursday work that week, too, I think, but I am not sure >> yet. >> >> If I am the only one calling from CET, I could offer another window of >> 8pm to 10 pm CET (any day). I would be calling from home then, a local >> (German) dial-in number would be great, as I can call those without >> additional costs. >> >> Friday is a bad day for me (for the 5pm CET slot), as we finish work >> early those days (4 pm CET) and I have a family appointment after that, >> which is even tight to meet with the 4 pm. The 8-10 pm slot would then >> be available again (assuming the local dial-in ;)) >> >> Best regards, >> Marc-Andre >> >> >>> I would suggest to first meet the week after >>> Thanksgiving (the week starting 12/1) and then continue on a >>> bi-weekly basis. If people think we should go with a weekly >>> meeting, I would be open for this as well. >>> >> >> At first I would also suggest bi-weekly. Maybe, when we get closer to >> any (to-be-defined) milestones >> >> Best regards, >> Marc-Andre >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Mpi3-tools mailing list >> Mpi3-tools(a)lists.mpi-forum.org >> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi3-tools >> > ------------------------------------------------------------------------ > > _______________________________________________ > Mpi3-tools mailing list > Mpi3-tools(a)lists.mpi-forum.org > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi3-tools >

1 0

Re: [Mpi3-tools] Welcome to MPI-Forum WG on Tools / Time for TelCon
by Hubert Ritzdorf 25 Nov '08

25 Nov '08

Hi, 5pm CET is fine for me. 8pm-10pm also. Any day except Friday 5th December and Thursday 11th. Hubert Marc-Andre Hermanns wrote: > Hi Martin, Hi all, > > It would be interesting to know who -- other than me -- is calling from > Europe? > > In the first week in December, for me the best day would be Tuesday > 2nd, if the call is to be at 5 pm CET (as I stay late that day anyway). > I could make Thursday work that week, too, I think, but I am not sure yet. > > If I am the only one calling from CET, I could offer another window of > 8pm to 10 pm CET (any day). I would be calling from home then, a local > (German) dial-in number would be great, as I can call those without > additional costs. > > Friday is a bad day for me (for the 5pm CET slot), as we finish work > early those days (4 pm CET) and I have a family appointment after that, > which is even tight to meet with the 4 pm. The 8-10 pm slot would then > be available again (assuming the local dial-in ;)) > > Best regards, > Marc-Andre > > >> I would suggest to first meet the week after >> Thanksgiving (the week starting 12/1) and then continue on a >> bi-weekly basis. If people think we should go with a weekly >> meeting, I would be open for this as well. >> > > At first I would also suggest bi-weekly. Maybe, when we get closer to > any (to-be-defined) milestones > > Best regards, > Marc-Andre > > ------------------------------------------------------------------------ > > _______________________________________________ > Mpi3-tools mailing list > Mpi3-tools(a)lists.mpi-forum.org > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi3-tools >

1 0

Re: [Mpi3-tools] Welcome to MPI-Forum WG on Tools / Time for TelCon
by Marc-Andre Hermanns 19 Nov '08

19 Nov '08

Hi Martin, Hi all, It would be interesting to know who -- other than me -- is calling from Europe? In the first week in December, for me the best day would be Tuesday 2nd, if the call is to be at 5 pm CET (as I stay late that day anyway). I could make Thursday work that week, too, I think, but I am not sure yet. If I am the only one calling from CET, I could offer another window of 8pm to 10 pm CET (any day). I would be calling from home then, a local (German) dial-in number would be great, as I can call those without additional costs. Friday is a bad day for me (for the 5pm CET slot), as we finish work early those days (4 pm CET) and I have a family appointment after that, which is even tight to meet with the 4 pm. The 8-10 pm slot would then be available again (assuming the local dial-in ;)) Best regards, Marc-Andre > I would suggest to first meet the week after > Thanksgiving (the week starting 12/1) and then continue on a > bi-weekly basis. If people think we should go with a weekly > meeting, I would be open for this as well. At first I would also suggest bi-weekly. Maybe, when we get closer to any (to-be-defined) milestones Best regards, Marc-Andre -- Marc-Andre Hermanns Juelich Supercomputing Centre Institute for Advanced Simulation Forschungszentrum Juelich GmbH D-52425 Juelich Germany Phone : +49-2461-61-2054 Fax : +49-2461-61-6656 eMail : m.a.hermanns(a)fz-juelich.de WWW : http://www.fz-juelich.de/jsc/ JSC is the coordinator of the John von Neumann Institute for Computing and member of the Gauss Centre for Supercomputing Sitz der Gesellschaft: Jülich Eingetragen im Handelsregister des Amtsgerichts Düren Nr. HR B 3498 Vorsitzende des Aufsichtsrats: MinDirig'in Bärbel Brumme-Bothe Vorstand: Prof. Dr. Achim Bachem (Vorsitzender), Dr. Ulrich Krafft (stellv. Vorsitzender) Dr. Sebastian M. Schmidt

1 0

Re: [Mpi3-tools] Welcome to MPI-Forum WG on Tools / Time for TelCon
by Jeff Squyres 14 Nov '08

14 Nov '08

On Nov 14, 2008, at 2:25 PM, Martin Schulz wrote: > Welcome to the newly formed working group on tool support in MPI. > It seems that a sufficient number of people have signed up and > hence I would like to start working on setting up a first meeting > for this group. I would suggest to first meet the week after > Thanksgiving (the week starting 12/1) and then continue on a > bi-weekly basis. If people think we should go with a weekly > meeting, I would be open for this as well. Sounds good to me. > From looking at the list it seems that we have people from both > the US and Europe who want to participate, which unfortunately > (or fortunately :) ) limits our choices. It basically has to > be an 8am PT, 11am ET, 5pm MSZ time slot and hence it is just > a matter of finding the right day of the week. Right now, Tuesday is the only regularly scheduled 11am US Eastern time meeting for me; all other days are open at that time. -- Jeff Squyres Cisco Systems

1 0

[Mpi3-tools] test
by Richard Graham 14 Nov '08

14 Nov '08

1 0

[Mpi3-tools] Welcome to MPI-Forum WG on Tools / Time for TelCon
by Martin Schulz 14 Nov '08

14 Nov '08

Hi all, Welcome to the newly formed working group on tool support in MPI. It seems that a sufficient number of people have signed up and hence I would like to start working on setting up a first meeting for this group. I would suggest to first meet the week after Thanksgiving (the week starting 12/1) and then continue on a bi-weekly basis. If people think we should go with a weekly meeting, I would be open for this as well. From looking at the list it seems that we have people from both the US and Europe who want to participate, which unfortunately (or fortunately :) ) limits our choices. It basically has to be an 8am PT, 11am ET, 5pm MSZ time slot and hence it is just a matter of finding the right day of the week. If everybody who would like to participate could please send me (or to the list) a set of preferred days, I will try to collect all the information and propose a day that works for most. I personally would prefer Thursday at that time, but I could also make Wednesday or Friday work. I hope this process converges quickly (due to the limited choices). Thanks, Martin PS: Please note that the correct address of this list is mpi3-tools(a)lists.mpi-forum.org (and not @mpi-forum.org) as stated in the original subscription confirmation. We are looking into this issue. _______________________________________________________________________ Martin Schulz, schulzm(a)llnl.gov, http://people.llnl.gov/schulz6 CASC @ Lawrence Livermore National Laboratory, Livermore, USA

1 0