Rich --
If you didn't make these corrections already, here's a new copy.
Thanks!
On Nov 15, 2010, at 1:22 PM, Fab Tillier wrote:
> Minor nits that I just caught on slide 5:
> - MPI_GET_COUNT_LONG should be MPI_GET_COUNT_LARGE, to avoid association with the C long type.
> - MPI_Tag should really be MPI_Rank, as the argument for large ranks is stronger than large tags.
>
> -Fab
>
> -----Original Message-----
> From: mpi3-bwcompat-bounces_at_[hidden] [mailto:mpi3-bwcompat-bounces_at_[hidden]] On Behalf Of Jeff Squyres
> Sent: Friday, November 12, 2010 1:04 PM
> To: Rich Graham
> Cc: MPI-3 backwards compatability WG
> Subject: [Mpi3-bwcompat] Backwards compat Forum BOF slides
>
> Rich --
>
> Sorry for the delay. Here's the slides we agreed on today in the WG meeting for the Forum BOF.
--
Jeff Squyres
jsquyres_at_[hidden]
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/
*
Minor nits that I just caught on slide 5:
- MPI_GET_COUNT_LONG should be MPI_GET_COUNT_LARGE, to avoid association with the C long type.
- MPI_Tag should really be MPI_Rank, as the argument for large ranks is stronger than large tags.
-Fab
-----Original Message-----
From: mpi3-bwcompat-bounces_at_[hidden] [mailto:mpi3-bwcompat-bounces_at_[hidden]] On Behalf Of Jeff Squyres
Sent: Friday, November 12, 2010 1:04 PM
To: Rich Graham
Cc: MPI-3 backwards compatability WG
Subject: [Mpi3-bwcompat] Backwards compat Forum BOF slides
Rich --
Sorry for the delay. Here's the slides we agreed on today in the WG meeting for the Forum BOF.
--
Jeff Squyres
jsquyres_at_[hidden]
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/
Minor nits that I just caught on slide 5:
- MPI_GET_COUNT_LONG should be MPI_GET_COUNT_LARGE, to avoid association with the C long type.
- MPI_Tag should really be MPI_Rank, as the argument for large ranks is stronger than large tags.
-Fab
-----Original Message-----
From: mpi3-bwcompat-bounces_at_[hidden] [mailto:mpi3-bwcompat-bounces_at_[hidden]] On Behalf Of Jeff Squyres
Sent: Friday, November 12, 2010 1:04 PM
To: Rich Graham
Cc: MPI-3 backwards compatability WG
Subject: [Mpi3-bwcompat] Backwards compat Forum BOF slides
Rich --
Sorry for the delay. Here's the slides we agreed on today in the WG meeting for the Forum BOF.
--
Jeff Squyres
jsquyres_at_[hidden]
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/
Rich --
Sorry for the delay. Here's the slides we agreed on today in the WG meeting for the Forum BOF.
--
Jeff Squyres
jsquyres_at_[hidden]
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/
*
Dave -- are you coming? So far, it's only Terry and me on the webex...
On Nov 12, 2010, at 10:30 AM, Jeff Squyres wrote:
> (re-sending because it bounced the first time due to pilot error)
>
> Begin forwarded message:
>
>> Here's a suggestion for slides (see attached) -- I revised Dave's original slides.
>>
>> Please use the webex info below for the call at 1pm US Eastern today (instead of the normal dial-in info) so that we can view / talk about the slides live.
>>
>> --------
>>
>> Topic: MPI3 Backwards Compat WG
>> Date: Friday, November 12, 2010
>> Time: 1:00 pm, Eastern Standard Time (New York, GMT-05:00)
>> Meeting Number: 201 135 180
>> Meeting Password: count
>>
>> -------------------------------------------------------
>> To join the online meeting (Now from the Apple iPhone (R) and other smartphones!)
>> -------------------------------------------------------
>> 1. Go to https://cisco.webex.com/ciscosales/j.php?ED=153174027&UID=0&PW=NMzkzNmRjNzV…
>> 2. Enter your name and email address.
>> 3. Enter the meeting password: count
>> 4. Click "Join Now".
>> 5. Follow the instructions that appear on your screen.
>>
>> To view in other time zones or languages, please click the link:
>> https://cisco.webex.com/ciscosales/j.php?ED=153174027&UID=0&PW=NMzkzNmRjNzV…
>>
>> ----------------------------------------------------------------
>> ALERT:Toll-Free Dial Restrictions for (408) and (919) Area Codes
>> ----------------------------------------------------------------
>>
>> The affected toll free numbers are: (866) 432-9903 for the San Jose/Milpitas area and (866) 349-3520 for the RTP area.
>>
>> Please dial the local access number for your area from the list below:
>> - San Jose/Milpitas (408) area: 525-6800
>> - RTP (919) area: 392-3330
>>
>> -------------------------------------------------------
>> To join the teleconference only
>> -------------------------------------------------------
>> 1. Dial into Cisco WebEx (view all Global Access Numbers at
>> http://cisco.com/en/US/about/doing_business/conferencing/index.html
>> 2. Follow the prompts to enter the Meeting Number (listed above) or Access Code followed by the # sign.
>>
>> San Jose, CA: +1.408.525.6800 RTP: +1.919.392.3330
>>
>> US/Canada: +1.866.432.9903 United Kingdom: +44.20.8824.0117
>>
>> India: +91.80.4350.1111 Germany: +49.619.6773.9002
>>
>> Japan: +81.3.5763.9394 China: +86.10.8515.5666
>>
>> -------------------------------------------------------
>> For assistance
>> -------------------------------------------------------
>> 1. Go to https://cisco.webex.com/ciscosales/mc
>> 2. On the left navigation bar, click "Support".
>>
>> You can contact me at:
>> jsquyres_at_[hidden]
>> 1-408-525 0971
>>
>> To update this meeting to your calendar program (for example Microsoft Outlook), click this link:
>> https://cisco.webex.com/ciscosales/j.php?ED=153174027&UID=0&ICS=UMI&LD=1&RD…
>>
>>
>> WebEx will automatically setup Meeting Manager for Windows the first time you join a meeting. To save time, you can setup prior to the meeting by clicking this link:
>> https://cisco.webex.com/ciscosales/meetingcenter/mcsetup.php
>>
>>
>>
>>
>> http://www.webex.com
>>
>> CCP:+14085256800x201135180#
>>
>> IMPORTANT NOTICE: This WebEx service includes a feature that allows audio and any documents and other materials exchanged or viewed during the session to be recorded. By joining this session, you automatically consent to such recordings. If you do not consent to the recording, discuss your concerns with the meeting host prior to the start of the recording or do not join the session. Please note that any such recordings may be subject to discovery in the event of litigation.
>>
>>
>>
>> On Nov 12, 2010, at 9:09 AM, Solt, David George wrote:
>>
>>> We can have a short call. I don’t have an agenda for today (other than more discussion on next directions), but I was planning to dial in. At the least Jeff can give his comments on the slides. J
>>> Dave
>>>
>>> From: Jeff Squyres (jsquyres) [mailto:jsquyres_at_[hidden]]
>>> Sent: Friday, November 12, 2010 5:43 AM
>>> To: Solt, David George
>>> Cc: Solt, David George; Supalov, Alexander; Graham, Richard L.; Quincey Koziol; William Gropp; Terry D. Dontje; Darius Buntinas; Dave Goodell; Torsten Hoefler; ftillier_at_[hidden]
>>> Subject: Re: MPI Backward Compatibility Working Group
>>>
>>> Are we going to have a call today? I have some comments on the slides.
>>>
>>> Sent from my PDA. No type good.
>>>
>>> On Nov 11, 2010, at 2:19 PM, "Solt, David George" <david.solt_at_[hidden]> wrote:
>>>
>>> I don’t know if it is too late to get this to Rich for SC bof, but I forgot about it. Comments welcome.
>>> Thanks,
>>> Dave
>
> --
> Jeff Squyres
> jsquyres_at_[hidden]
> For corporate legal information go to:
> http://www.cisco.com/web/about/doing_business/legal/cri/
> <SCbofWCwg.pptx>
--
Jeff Squyres
jsquyres_at_[hidden]
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/
(re-sending because it bounced the first time due to pilot error)
Begin forwarded message:
> Here's a suggestion for slides (see attached) -- I revised Dave's original slides.
>
> Please use the webex info below for the call at 1pm US Eastern today (instead of the normal dial-in info) so that we can view / talk about the slides live.
>
> --------
>
> Topic: MPI3 Backwards Compat WG
> Date: Friday, November 12, 2010
> Time: 1:00 pm, Eastern Standard Time (New York, GMT-05:00)
> Meeting Number: 201 135 180
> Meeting Password: count
>
> -------------------------------------------------------
> To join the online meeting (Now from the Apple iPhone (R) and other smartphones!)
> -------------------------------------------------------
> 1. Go to https://cisco.webex.com/ciscosales/j.php?ED=153174027&UID=0&PW=NMzkzNmRjNzV…
> 2. Enter your name and email address.
> 3. Enter the meeting password: count
> 4. Click "Join Now".
> 5. Follow the instructions that appear on your screen.
>
> To view in other time zones or languages, please click the link:
> https://cisco.webex.com/ciscosales/j.php?ED=153174027&UID=0&PW=NMzkzNmRjNzV…
>
> ----------------------------------------------------------------
> ALERT:Toll-Free Dial Restrictions for (408) and (919) Area Codes
> ----------------------------------------------------------------
>
> The affected toll free numbers are: (866) 432-9903 for the San Jose/Milpitas area and (866) 349-3520 for the RTP area.
>
> Please dial the local access number for your area from the list below:
> - San Jose/Milpitas (408) area: 525-6800
> - RTP (919) area: 392-3330
>
> -------------------------------------------------------
> To join the teleconference only
> -------------------------------------------------------
> 1. Dial into Cisco WebEx (view all Global Access Numbers at
> http://cisco.com/en/US/about/doing_business/conferencing/index.html
> 2. Follow the prompts to enter the Meeting Number (listed above) or Access Code followed by the # sign.
>
> San Jose, CA: +1.408.525.6800 RTP: +1.919.392.3330
>
> US/Canada: +1.866.432.9903 United Kingdom: +44.20.8824.0117
>
> India: +91.80.4350.1111 Germany: +49.619.6773.9002
>
> Japan: +81.3.5763.9394 China: +86.10.8515.5666
>
> -------------------------------------------------------
> For assistance
> -------------------------------------------------------
> 1. Go to https://cisco.webex.com/ciscosales/mc
> 2. On the left navigation bar, click "Support".
>
> You can contact me at:
> jsquyres_at_[hidden]
> 1-408-525 0971
>
> To update this meeting to your calendar program (for example Microsoft Outlook), click this link:
> https://cisco.webex.com/ciscosales/j.php?ED=153174027&UID=0&ICS=UMI&LD=1&RD…
>
>
> WebEx will automatically setup Meeting Manager for Windows the first time you join a meeting. To save time, you can setup prior to the meeting by clicking this link:
> https://cisco.webex.com/ciscosales/meetingcenter/mcsetup.php
>
>
>
>
> http://www.webex.com
>
> CCP:+14085256800x201135180#
>
> IMPORTANT NOTICE: This WebEx service includes a feature that allows audio and any documents and other materials exchanged or viewed during the session to be recorded. By joining this session, you automatically consent to such recordings. If you do not consent to the recording, discuss your concerns with the meeting host prior to the start of the recording or do not join the session. Please note that any such recordings may be subject to discovery in the event of litigation.
>
>
>
> On Nov 12, 2010, at 9:09 AM, Solt, David George wrote:
>
>> We can have a short call. I don’t have an agenda for today (other than more discussion on next directions), but I was planning to dial in. At the least Jeff can give his comments on the slides. J
>> Dave
>>
>> From: Jeff Squyres (jsquyres) [mailto:jsquyres_at_[hidden]]
>> Sent: Friday, November 12, 2010 5:43 AM
>> To: Solt, David George
>> Cc: Solt, David George; Supalov, Alexander; Graham, Richard L.; Quincey Koziol; William Gropp; Terry D. Dontje; Darius Buntinas; Dave Goodell; Torsten Hoefler; ftillier_at_[hidden]
>> Subject: Re: MPI Backward Compatibility Working Group
>>
>> Are we going to have a call today? I have some comments on the slides.
>>
>> Sent from my PDA. No type good.
>>
>> On Nov 11, 2010, at 2:19 PM, "Solt, David George" <david.solt_at_[hidden]> wrote:
>>
>> I don’t know if it is too late to get this to Rich for SC bof, but I forgot about it. Comments welcome.
>> Thanks,
>> Dave
--
Jeff Squyres
jsquyres_at_[hidden]
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/
*
