September 2014 - Admins - mailman3.cels.anl.gov

[JLSE-Admins] Update to Software JLSE Page
by Allen, Benjamin S. 03 Sep '14

03 Sep '14

Hi Ginny, When you have a moment can you please update http://jlse.anl.gov/installed-software/, the line: export INTEL_LICENSE_FILE=/soft/compilers/intel/licenses to export INTEL_LICENSE_FILE=28518@ftsn2 Thanks, Ben

1 0

Re: [JLSE-Admins] JLSE Account Activated
by Allen, Benjamin S. 03 Sep '14

03 Sep '14

Hi Sameer, You need to point to our new Intel license server: export INTEL_LICENSE_FILE=28518@ftsn2 I do not have a ARM64 server quite yet. We have two APM X-Gene based boards on order from SoftIron: http://www.softiron.co.uk/products/. They should arrive in 20-40 days. Ben On Sep 3, 2014, at 9:49 AM, Sameer Shende <sameer(a)paratools.com> wrote: > Hi Ben, > Thanks for the info below. I had some problem using the Intel licenses. Do I have to do something special (besides source'ing the compilerenv.sh file) to get it to work on Dancelot? I see: > [sameer@dancelot tau-2.23.2b2]$ which icpc > /soft/compilers/intel/composer_xe_2013_sp1.3.174/bin/intel64/icpc > [sameer@dancelot tau-2.23.2b2]$ icpc -v > > Error: A license for CCompL is not available (-76,61026,2). > > License file(s) used were (in this order): > 1. Trusted Storage > ** 2. /soft/compilers/intel/composer_xe_2013_sp1.3.174/licenses > ** 3. /opt/intel/licenses > ** 4. /home/sameer/intel/licenses > ** 5. /soft/compilers/intel/composer_xe_2013_sp1.3.174/Licenses > ** 6. /Users/Shared/Library/Application Support/Intel/Licenses > ** 7. /soft/compilers/intel/composer_xe_2013_sp1.3.174/bin/intel64/*.lic > > Please visit http://software.intel.com/sites/support/ if you require technical assistance. > > icpc: error #10052: could not checkout FLEXlm license > > Do you have an ARM 64 bit system that I may port TAU to? > Thanks! > - Sameer > > > On Aug 27, 2014, at 2:54 PM, Allen, Benjamin S. <bsallen(a)alcf.anl.gov> wrote: > >>> Would you please make me a directory: >>> mkdir /soft/perftools >>> mkdir /soft/perftools/tau >>> chown sameer /soft/perftools/tau >>> >>> on dancelot/prancelot, Dowd, Maud/Neddy, Jenny/Ruth/Lucie, Slashing/Clipping/Hooking? >> >> Done. >> >> Note, /soft is shared across like platform machines (i.e. x86_64, ppc64, armv7l). >> >>> I can't login to Kayla. Would you please enable my access? >> >> I need to update this machine's configuration, give me a week or so for this. >> >>> I can't find modules or soft environment or MPI libraries on Dowd. Where are they located? >> >> We don't have softenv or similar setup in JLSE. It was decided early on that typical users in JLSE would be capable of figuring out their own environments. There's a few installs of mpich in /soft/libraries/mpi on the x86_64 /soft. Note the mpich-intel install is statically compiled and overly optimized, so it's probably not the best for general use. >> >> I don't think anyone has done the same for ppc64. If you'd like to install mpich or similar let me know. >> >> Just a quick note, JLSE resources aren't scheduled, so please be courteous of other users. The Xeon Phi servers are the busiest currently. >> >> Ben >> >> >> On Aug 27, 2014, at 4:22 PM, Sameer Shende <sameer(a)cs.uoregon.edu> wrote: >> >>> Hi, >>> Would you please make me a directory: >>> mkdir /soft/perftools >>> mkdir /soft/perftools/tau >>> chown sameer /soft/perftools/tau >>> >>> on dancelot/prancelot, Dowd, Maud/Neddy, Jenny/Ruth/Lucie, Slashing/Clipping/Hooking? Also, I can't login to Kayla. Would you please enable my access? I can't find modules or soft environment or MPI libraries on Dowd. Where are they located? I have installed TAU in my home directory in ~sameer/tau2 on Dowd. >>> Thanks! >>> - Sameer >>> >>> >>> On Aug 27, 2014, at 2:03 PM, admins(a)jlse.anl.gov wrote: >>> >>>> >>>> Hello SAMEER SHENDE, >>>> >>>> Your JLSE account, sameer has been activated. >>>> >>>> Thank You >>>> JLSE Account System >>> >>> _______________________________________________ >>> Admins mailing list >>> Admins(a)lists.jlse.anl.gov >>> https://lists.jlse.anl.gov/mailman/listinfo/admins >> >

1 0

Re: [JLSE-Admins] JLSE Account Activated
by Sameer Shende 03 Sep '14

03 Sep '14

Hi Ben, Thanks for the info below. I had some problem using the Intel licenses. Do I have to do something special (besides source'ing the compilerenv.sh file) to get it to work on Dancelot? I see: [sameer@dancelot tau-2.23.2b2]$ which icpc /soft/compilers/intel/composer_xe_2013_sp1.3.174/bin/intel64/icpc [sameer@dancelot tau-2.23.2b2]$ icpc -v Error: A license for CCompL is not available (-76,61026,2). License file(s) used were (in this order): 1. Trusted Storage ** 2. /soft/compilers/intel/composer_xe_2013_sp1.3.174/licenses ** 3. /opt/intel/licenses ** 4. /home/sameer/intel/licenses ** 5. /soft/compilers/intel/composer_xe_2013_sp1.3.174/Licenses ** 6. /Users/Shared/Library/Application Support/Intel/Licenses ** 7. /soft/compilers/intel/composer_xe_2013_sp1.3.174/bin/intel64/*.lic Please visit http://software.intel.com/sites/support/ if you require technical assistance. icpc: error #10052: could not checkout FLEXlm license Do you have an ARM 64 bit system that I may port TAU to? Thanks! - Sameer On Aug 27, 2014, at 2:54 PM, Allen, Benjamin S. <bsallen(a)alcf.anl.gov> wrote: >> Would you please make me a directory: >> mkdir /soft/perftools >> mkdir /soft/perftools/tau >> chown sameer /soft/perftools/tau >> >> on dancelot/prancelot, Dowd, Maud/Neddy, Jenny/Ruth/Lucie, Slashing/Clipping/Hooking? > > Done. > > Note, /soft is shared across like platform machines (i.e. x86_64, ppc64, armv7l). > >> I can't login to Kayla. Would you please enable my access? > > I need to update this machine's configuration, give me a week or so for this. > >> I can't find modules or soft environment or MPI libraries on Dowd. Where are they located? > > We don't have softenv or similar setup in JLSE. It was decided early on that typical users in JLSE would be capable of figuring out their own environments. There's a few installs of mpich in /soft/libraries/mpi on the x86_64 /soft. Note the mpich-intel install is statically compiled and overly optimized, so it's probably not the best for general use. > > I don't think anyone has done the same for ppc64. If you'd like to install mpich or similar let me know. > > Just a quick note, JLSE resources aren't scheduled, so please be courteous of other users. The Xeon Phi servers are the busiest currently. > > Ben > > > On Aug 27, 2014, at 4:22 PM, Sameer Shende <sameer(a)cs.uoregon.edu> wrote: > >> Hi, >> Would you please make me a directory: >> mkdir /soft/perftools >> mkdir /soft/perftools/tau >> chown sameer /soft/perftools/tau >> >> on dancelot/prancelot, Dowd, Maud/Neddy, Jenny/Ruth/Lucie, Slashing/Clipping/Hooking? Also, I can't login to Kayla. Would you please enable my access? I can't find modules or soft environment or MPI libraries on Dowd. Where are they located? I have installed TAU in my home directory in ~sameer/tau2 on Dowd. >> Thanks! >> - Sameer >> >> >> On Aug 27, 2014, at 2:03 PM, admins(a)jlse.anl.gov wrote: >> >>> >>> Hello SAMEER SHENDE, >>> >>> Your JLSE account, sameer has been activated. >>> >>> Thank You >>> JLSE Account System >> >> _______________________________________________ >> Admins mailing list >> Admins(a)lists.jlse.anl.gov >> https://lists.jlse.anl.gov/mailman/listinfo/admins >

1 0

Re: [JLSE-Admins] Request: JLSE VLAN Availability in 240-4312
by Linda Winkler 02 Sep '14

02 Sep '14

On Sep 2, 2014, at 5:56 PM, "Allen, Benjamin S." <bsallen(a)alcf.anl.gov> wrote: > Linda and Corby, > > Has there been any progress on: > > 1. Getting a permanent solution to getting the fiber patched through to 4312 > 2. Having the building deal with the water leak the roof leak has been resolved > 3. Getting a new networking cabinet for the room > > Thanks, > > Ben > > > On Jul 1, 2014, at 9:31 AM, Linda Winkler <Winkler(a)mcs.anl.gov> wrote: > >> 4312 makes sense >> lw >> On Jul 1, 2014, at 9:24 AM, "Allen, Benjamin S." <bsallen(a)alcf.anl.gov> wrote: >> >>> Works for me. Added Kaz to the list if he's available. Craig is on vacation. >>> >>> Shall we meet at 4312 or a conference room? >>> >>> Ben >>> >>> >>> From: "Schmitz, Corby B." <cschmitz(a)anl.gov> >>> Sent: Jul 1, 2014 9:20 AM >>> To: "Winkler, Linda" <winkler(a)mcs.anl.gov>;Allen, Benjamin S. >>> Cc: "Milner, Ryan B." <rmilner(a)alcf.anl.gov>;Stacey, Craig J.;Holohan, Edmund A., III;admins(a)jlse.anl.gov >>> Subject: RE: Request: JLSE VLAN Availability in 240-4312 >>> >>> I'm good. >>> >>> -- >>> corby >>> >>> >>> -----Original Message----- >>> From: Linda Winkler [mailto:[email protected]] >>> Sent: Tuesday, July 01, 2014 9:20 AM >>> To: Allen, Benjamin S. >>> Cc: Schmitz, Corby B.; Milner, Ryan B.; Stacey, Craig J.; Holohan, Edmund A., III; admins(a)jlse.anl.gov >>> Subject: Re: Request: JLSE VLAN Availability in 240-4312 >>> >>> 2pm? >>> >>> >>> On Jul 1, 2014, at 8:23 AM, "Allen, Benjamin S." <bsallen(a)alcf.anl.gov> wrote: >>> >>>> ALCF has its operations meeting at 10:30, how's sometime this afternoon for everyone? Note this isn't urgent so we can push it to a later date if needed. >>>> >>>> Ben >>>> >>>> >>>> From: Linda Winkler <winkler(a)mcs.anl.gov> >>>> Sent: Jul 1, 2014 8:19 AM >>>> To: Allen, Benjamin S. >>>> Cc: "Holohan, Edmund A., III" <eholohan(a)alcf.anl.gov>;Milner, Ryan B.;Schmitz, Corby B.;Stacey, Craig J.;admins(a)jlse.anl.gov >>>> Subject: Re: Request: JLSE VLAN Availability in 240-4312 >>>> >>>> Tues 10am? >>>> lw >>>> >>>> On Jun 30, 2014, at 4:58 PM, "Allen, Benjamin S." <bsallen(a)alcf.anl.gov> wrote: >>>> >>>>> Sounds good. Feel free to propose a place and time to meet. >>>>> >>>>> Ben >>>>> >>>>> On Jun 30, 2014, at 4:38 PM, Linda Winkler <winkler(a)mcs.anl.gov> wrote: >>>>> >>>>>> Let's review the requirements on Tues and develop a plan. It has been sometime since anyone paid attention to needs in that space. >>>>>> lw >>>>>> >>>>>> >>>>>> On Jun 30, 2014, at 4:11 PM, "Allen, Benjamin S." <bsallen(a)alcf.anl.gov> wrote: >>>>>> >>>>>>> Hello Everyone, >>>>>>> >>>>>>> The east part of 240-4312, what was formally named Tinkerlab, has joined JLSE. We would like to put a number of machines housed in that room on a new private VLAN that is also accessible by ftsn1, ftsn2, ftlogin1, and ftlogin2. These servers are behind ALCF’s Donald. >>>>>>> >>>>>>> It appears there’s a Juniper switch serving the room. There are also a number of small desktop switches in the tinkerlab area, which ideally we could replace with a single managed switch in a configuration that meets Kaz and others needs. It appears the existing uplink from the Juniper is a 10GbE port, and the second 10GbE port on the Juniper switch is used for the display wall machine. >>>>>>> >>>>>>> As an aside I would also suggest we get a number of additional floor tiles cut with matching floor grommets, for each work area in the thinkerlab. Then all network cabling can be run under the floor to eliminate the current tripping hazards. >>>>>>> >>>>>>> Please let me know what is required to make this work. >>>>>>> >>>>>>> Thanks, >>>>>>> >>>>>>> Ben >>>>>> >>>>> >>>> >>> >> >

1 0

Re: [JLSE-Admins] Request: JLSE VLAN Availability in 240-4312
by Allen, Benjamin S. 02 Sep '14

02 Sep '14

Linda and Corby, Has there been any progress on: 1. Getting a permanent solution to getting the fiber patched through to 4312 2. Having the building deal with the water leak 3. Getting a new networking cabinet for the room Thanks, Ben On Jul 1, 2014, at 9:31 AM, Linda Winkler <Winkler(a)mcs.anl.gov> wrote: > 4312 makes sense > lw > On Jul 1, 2014, at 9:24 AM, "Allen, Benjamin S." <bsallen(a)alcf.anl.gov> wrote: > >> Works for me. Added Kaz to the list if he's available. Craig is on vacation. >> >> Shall we meet at 4312 or a conference room? >> >> Ben >> >> >> From: "Schmitz, Corby B." <cschmitz(a)anl.gov> >> Sent: Jul 1, 2014 9:20 AM >> To: "Winkler, Linda" <winkler(a)mcs.anl.gov>;Allen, Benjamin S. >> Cc: "Milner, Ryan B." <rmilner(a)alcf.anl.gov>;Stacey, Craig J.;Holohan, Edmund A., III;admins(a)jlse.anl.gov >> Subject: RE: Request: JLSE VLAN Availability in 240-4312 >> >> I'm good. >> >> -- >> corby >> >> >> -----Original Message----- >> From: Linda Winkler [mailto:[email protected]] >> Sent: Tuesday, July 01, 2014 9:20 AM >> To: Allen, Benjamin S. >> Cc: Schmitz, Corby B.; Milner, Ryan B.; Stacey, Craig J.; Holohan, Edmund A., III; admins(a)jlse.anl.gov >> Subject: Re: Request: JLSE VLAN Availability in 240-4312 >> >> 2pm? >> >> >> On Jul 1, 2014, at 8:23 AM, "Allen, Benjamin S." <bsallen(a)alcf.anl.gov> wrote: >> >>> ALCF has its operations meeting at 10:30, how's sometime this afternoon for everyone? Note this isn't urgent so we can push it to a later date if needed. >>> >>> Ben >>> >>> >>> From: Linda Winkler <winkler(a)mcs.anl.gov> >>> Sent: Jul 1, 2014 8:19 AM >>> To: Allen, Benjamin S. >>> Cc: "Holohan, Edmund A., III" <eholohan(a)alcf.anl.gov>;Milner, Ryan B.;Schmitz, Corby B.;Stacey, Craig J.;admins(a)jlse.anl.gov >>> Subject: Re: Request: JLSE VLAN Availability in 240-4312 >>> >>> Tues 10am? >>> lw >>> >>> On Jun 30, 2014, at 4:58 PM, "Allen, Benjamin S." <bsallen(a)alcf.anl.gov> wrote: >>> >>>> Sounds good. Feel free to propose a place and time to meet. >>>> >>>> Ben >>>> >>>> On Jun 30, 2014, at 4:38 PM, Linda Winkler <winkler(a)mcs.anl.gov> wrote: >>>> >>>>> Let's review the requirements on Tues and develop a plan. It has been sometime since anyone paid attention to needs in that space. >>>>> lw >>>>> >>>>> >>>>> On Jun 30, 2014, at 4:11 PM, "Allen, Benjamin S." <bsallen(a)alcf.anl.gov> wrote: >>>>> >>>>>> Hello Everyone, >>>>>> >>>>>> The east part of 240-4312, what was formally named Tinkerlab, has joined JLSE. We would like to put a number of machines housed in that room on a new private VLAN that is also accessible by ftsn1, ftsn2, ftlogin1, and ftlogin2. These servers are behind ALCF’s Donald. >>>>>> >>>>>> It appears there’s a Juniper switch serving the room. There are also a number of small desktop switches in the tinkerlab area, which ideally we could replace with a single managed switch in a configuration that meets Kaz and others needs. It appears the existing uplink from the Juniper is a 10GbE port, and the second 10GbE port on the Juniper switch is used for the display wall machine. >>>>>> >>>>>> As an aside I would also suggest we get a number of additional floor tiles cut with matching floor grommets, for each work area in the thinkerlab. Then all network cabling can be run under the floor to eliminate the current tripping hazards. >>>>>> >>>>>> Please let me know what is required to make this work. >>>>>> >>>>>> Thanks, >>>>>> >>>>>> Ben >>>>> >>>> >>> >> >

1 0