- mpiwg-rma - mailman3.cels.anl.gov

Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings
by Rolf Rabenseifner 20 Feb '14

20 Feb '14

Jeff, I expect that there is a consensus that the MPI_WIN_SYNC is needed in my example. I hope that there is also a consensus that all wording about MPI_WIN_SYNC is about the separate memory model or about application that use RMA calls. And that there is no wording on MPI_WIN_SYNC in the unified memory model, especially for the case that there isn't any RMA call. Therefore, I expect that Jim's proposal is good. I'll continue with an reply to Jim's email. Best regards Rolf ----- Original Message ----- > From: "Jeff Hammond" <jeff.science(a)gmail.com> > To: "MPI WG Remote Memory Access working group" <mpiwg-rma(a)lists.mpi-forum.org> > Cc: "MPI WG Remote Memory Access working group" <mpiwg-rma(a)lists.mpi-forum.org> > Sent: Thursday, February 20, 2014 2:09:08 PM > Subject: Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings > > The critical word I think you're overlooking is "eventually". > > Win_sync induces the public-private alignment at the point of call. > It also syncs between diff procs doing load-store as a wrapper > around the processor-specific memory barrier. > > If we want to add pedantic text, that's fine though, but I still > don't think it's critical. > > Jeff > > Sent from my iPhone > > > On Feb 20, 2014, at 3:55 AM, Rolf Rabenseifner > > <rabenseifner(a)hlrs.de> wrote: > > > > Jeff, > > > > the problem is that we are in the unified model. > > > > I expect that nobody would expect that > > > > "the purposes of synchronizing the private and public window" > > > > (from your cited text) is needed if > > > > "public and private copies are identical", > > > > see MPI-3.0 p436:37-40, which say > > > > "In the RMA unified model, public and private copies are identical > > and updates via put > > or accumulate calls are eventually observed by load operations > > without additional RMA > > calls. A store access to a window is eventually visible to remote > > get or accumulate calls > > without additional RMA calls." > > > > MPI-3.0 p456:3ff say > > > > "In the MPI_WIN_UNIFIED memory model, the rules are much simpler > > because the public > > and private windows are the same. ..." > > > > and especially p456:34-36 > > > > "This permits updates to memory with > > store operations without requiring an RMA epoch." > > > > I read all this text and thought that I do not need any additional > > synchronization besides the (empty) pt-to-pt Messages. > > The members of the RMA working group convinced me > > that the MPI_WIN_SYNC is needed to guarantee that a locally > > visible X=13 may not be remote visible without the MPI_WIN_SYNC > > although the MPI-3.0 text clearly says > > "in the RMA unified model, public and private copies are > > identical". > > > > Currently, there is no example in this section showing the behavior > > in the unified model with only using load/store, i.e. without any > > RMA call. All existing examples use some PUT or GET. > > > > I tried to fill this gap to prevent any mis-interpretation > > of p436:37-40 and p456:3-p457:3. > > > > Best regards > > Rolf > > > > > > ----- Original Message ----- > >> From: "Jeff Hammond" <jeff.science(a)gmail.com> > >> To: "MPI WG Remote Memory Access working group" > >> <mpiwg-rma(a)lists.mpi-forum.org> > >> Cc: "Jeff Squyres" <jsquyres(a)cisco.com> > >> Sent: Wednesday, February 19, 2014 7:19:14 PM > >> Subject: Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings > >> > >> Other than interactions that are unique to Fortran, I do not > >> understand what is unclear about the following text from MPI-3: > >> > >> "For the purposes of synchronizing the private and public window, > >> MPI_WIN_SYNC has the effect of ending and reopening an access and > >> exposure epoch on the window." > >> > >> Thus, the valid usage is prescribed by its effective equivalence > >> to > >> "MPI_WIN_UNLOCK; MPI_WIN_LOCK;". I apologize if the WG has been > >> sloppy in how we've discussed MPI_WIN_SYNC, but I do not feel the > >> standard is ambiguous. > >> > >> Now, if you are arguing that Fortran is a special problem for > >> MPI_WIN_SYNC, then I will gladly support your argument that > >> Fortran > >> is > >> a special problem for lots of things :-) > >> > >> Jeff > >> > >> On Wed, Feb 19, 2014 at 11:44 AM, Rolf Rabenseifner > >> <rabenseifner(a)hlrs.de> wrote: > >>> Jim, > >>> > >>> Yes Jim, you are fully right and I updated ticket 413 according > >>> to > >>> your corrections. > >>> Thank you for your carefully reading and your corrections. > >>> > >>> The reason for this ticket is very simple: > >>> Nothing about the use of MPI_Win_sync for the use-case > >>> in this example is really explained by MPI-3.0. > >>> I expect, that for MPI-4.0, the rules for RMA synchronization > >>> for shared memory windows must be revisited. > >>> But this would be another ticket. > >>> > >>> Best regards > >>> Rolf > >>> > >>> ----- Original Message ----- > >>>> From: "Jim Dinan" <james.dinan(a)gmail.com> > >>>> To: "MPI WG Remote Memory Access working group" > >>>> <mpiwg-rma(a)lists.mpi-forum.org> > >>>> Cc: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de>, "Jeff Squyres" > >>>> <jsquyres(a)cisco.com> > >>>> Sent: Monday, February 17, 2014 11:30:42 PM > >>>> Subject: Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings > >>>> > >>>> > >>>> Rolf, > >>>> > >>>> > >>>> I think this ticket needs to be reviewed by the RMA WG before > >>>> moving > >>>> it forward. I would suggest updating the text to incorporate > >>>> the > >>>> following changes: > >>>> > >>>> > >>>> Example 11.13 demonstrates the proper synchronization in the > >>>> unified > >>>> memory model when a data transfer is implemented with load and > >>>> store > >>>> (instead of MPI_PUT or MPI_GET) and the synchronization between > >>>> processes is performed using point-to-point communication. The > >>>> synchronization between processes must be supplemented with a > >>>> memory > >>>> synchronization through calls to MPI_WIN_SYNC, which act locally > >>>> as > >>>> a processor-memory barrier. In Fortran, reordering of the > >>>> MPI_WIN_SYNC calls must be prevented with MPI_F_SYNC_REG > >>>> operations. > >>>> > >>>> The variable X is contained within a shared memory window and X > >>>> corresponds to the same memory location at both processes. The > >>>> MPI_WIN_SYNC operation performed by process A ensures completion > >>>> of > >>>> the load/store operations issued by process A. The MPI_WIN_SYNC > >>>> operation performed by process B ensures that process A's > >>>> updates > >>>> to > >>>> X are visible to process B. > >>>> > >>>> In the example, I don't see the reason for the second set of > >>>> SYNC > >>>> operations after B's read of X. If A updates X and B only reads > >>>> it, > >>>> the second send/recv synchronization should be sufficient. That > >>>> is, > >>>> B has not made any updates to X that need to be made visible A, > >>>> and > >>>> B's read of X will be ordered because of the send operation. > >>>> The > >>>> F_SYNC could still be needed to preserve this ordering. > >>>> > >>>> > >>>> ~Jim. > >>>> > >>>> > >>>> > >>>> On Mon, Feb 17, 2014 at 12:23 PM, Jeff Hammond < > >>>> jeff.science(a)gmail.com > wrote: > >>>> > >>>> > >>>> Switching to the WG list so that everyone is involved... > >>>> > >>>> I do not see adding an example as so urgent that it needs to be > >>>> dealt > >>>> with at the next meeting, given how overloaded the relevant > >>>> people > >>>> are. > >>>> > >>>> Honestly, it is more likely to be read by users if the example > >>>> and > >>>> commentary on it are the subject of a blog post on Squyres' > >>>> blog. > >>>> At > >>>> the very least, that will ensure Google indexes it and thus > >>>> curious > >>>> people will find it (as much cannot be said for the MPI standard > >>>> itself). > >>>> > >>>> Jeff > >>>> > >>>> > >>>> > >>>> On Mon, Feb 17, 2014 at 10:50 AM, Rolf Rabenseifner > >>>> < rabenseifner(a)hlrs.de > wrote: > >>>>> Pavan, > >>>>> > >>>>> do you put also #413 on the list. > >>>>> I believe, it's better to have it on the list > >>>>> although it is only an example and therefore the RMA group > >>>>> may put it on the errata without plenary. > >>>>> Please can you do all what is needed > >>>>> that it comes on the MPI-3.0 errata list. > >>>>> > >>>>> Best regards > >>>>> Rolf > >>>>> > >>>>>> Pavan, > >>>>>> thank you for supporting it in the March meeting (Rajeev > >>>>>> will > >>>>>> not > >>>>>> be there). > >>>>>> Is there a RMA WG Meeting at the March Forum Meeting? > >>>>>> Will you do an MPI-3.0 errata plenary reading > >>>>>> or will you put it into the errata by WG dicision, > >>>>>> because it is only an example? > >>>>>> In both cases #413 should be latest tomorrow on the agenda. > >>>>>> > >>>>>> Because it is one block of text at one precise location, > >>>>>> the ticket format may be enough formalism, i.e., no extra > >>>>>> pdf. > >>>>> > >>>>> ----- Original Message ----- > >>>>>> From: "Jim Dinan" < james.dinan(a)gmail.com > > >>>>>> To: "Main MPI Forum mailing list" < > >>>>>> mpi-forum(a)lists.mpi-forum.org > >>>>>> Sent: Monday, February 17, 2014 4:35:51 PM > >>>>>> Subject: [Mpi-forum] 3/14: Formal Readings > >>>>>> > >>>>>> > >>>>>> > >>>>>> Hi All, > >>>>>> > >>>>>> > >>>>>> The RMA and Hybrid working groups would like to put forward > >>>>>> the > >>>>>> following tickets for formal readings at the upcoming meeting: > >>>>>> > >>>>>> > >>>>>> #380 - Endpoints proposal > >>>>>> > >>>>>> > >>>>>> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/380/mpi-repo… > >>>>>> > >>>>>> > >>>>>> Read by: Pavan Balaji > >>>>>> > >>>>>> > >>>>>> #349, #402, #404 - Address arithmetic proposal > >>>>>> > >>>>>> > >>>>>> > >>>>>> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/349/review-3… > >>>>>> > >>>>>> > >>>>>> > >>>>>> Read by: David Goodell > >>>>>> #369 - Add same_disp_unit info key for RMA window creation > >>>>>> > >>>>>> > >>>>>> > >>>>>> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/369/mpi-repo… > >>>>>> > >>>>>> > >>>>>> > >>>>>> Read by: Pavan Balaji > >>>>>> > >>>>>> Please add these to the agenda. Unfortunately, I will not be > >>>>>> able > >>>>>> to > >>>>>> attend this meeting, so I have included a contact person for > >>>>>> each > >>>>>> ticket. > >>>>>> > >>>>>> > >>>>>> Thanks! > >>>>>> ~Jim. > >>>>>> _______________________________________________ > >>>>>> mpi-forum mailing list > >>>>>> mpi-forum(a)lists.mpi-forum.org > >>>>>> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi-forum > >>>>> > >>>>> -- > >>>>> Dr. Rolf Rabenseifner . . . . . . . . . .. email > >>>>> rabenseifner(a)hlrs.de > >>>>> High Performance Computing Center (HLRS) . phone > >>>>> ++49(0)711/685-65530 > >>>>> University of Stuttgart . . . . . . . . .. fax ++49(0)711 / > >>>>> 685-65832 > >>>>> Head of Dpmt Parallel Computing . . . > >>>>> www.hlrs.de/people/rabenseifner > >>>>> Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room > >>>>> 1.307) > >>>> > >>>> > >>>> > >>>> -- > >>>> Jeff Hammond > >>>> jeff.science(a)gmail.com > >>>> _______________________________________________ > >>>> mpiwg-rma mailing list > >>>> mpiwg-rma(a)lists.mpi-forum.org > >>>> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > >>> > >>> -- > >>> Dr. Rolf Rabenseifner . . . . . . . . . .. email > >>> rabenseifner(a)hlrs.de > >>> High Performance Computing Center (HLRS) . phone > >>> ++49(0)711/685-65530 > >>> University of Stuttgart . . . . . . . . .. fax ++49(0)711 / > >>> 685-65832 > >>> Head of Dpmt Parallel Computing . . . > >>> www.hlrs.de/people/rabenseifner > >>> Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room > >>> 1.307) > >>> _______________________________________________ > >>> mpiwg-rma mailing list > >>> mpiwg-rma(a)lists.mpi-forum.org > >>> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > >> > >> > >> > >> -- > >> Jeff Hammond > >> jeff.science(a)gmail.com > >> _______________________________________________ > >> mpiwg-rma mailing list > >> mpiwg-rma(a)lists.mpi-forum.org > >> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > > > > -- > > Dr. Rolf Rabenseifner . . . . . . . . . .. email > > rabenseifner(a)hlrs.de > > High Performance Computing Center (HLRS) . phone > > ++49(0)711/685-65530 > > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / > > 685-65832 > > Head of Dpmt Parallel Computing . . . > > www.hlrs.de/people/rabenseifner > > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room > > 1.307) > > _______________________________________________ > > mpiwg-rma mailing list > > mpiwg-rma(a)lists.mpi-forum.org > > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > _______________________________________________ > mpiwg-rma mailing list > mpiwg-rma(a)lists.mpi-forum.org > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307)

1 0

Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings
by Jeff Hammond 20 Feb '14

20 Feb '14

The critical word I think you're overlooking is "eventually". Win_sync induces the public-private alignment at the point of call. It also syncs between diff procs doing load-store as a wrapper around the processor-specific memory barrier. If we want to add pedantic text, that's fine though, but I still don't think it's critical. Jeff Sent from my iPhone > On Feb 20, 2014, at 3:55 AM, Rolf Rabenseifner <rabenseifner(a)hlrs.de> wrote: > > Jeff, > > the problem is that we are in the unified model. > > I expect that nobody would expect that > > "the purposes of synchronizing the private and public window" > > (from your cited text) is needed if > > "public and private copies are identical", > > see MPI-3.0 p436:37-40, which say > > "In the RMA unified model, public and private copies are identical and updates via put > or accumulate calls are eventually observed by load operations without additional RMA > calls. A store access to a window is eventually visible to remote get or accumulate calls > without additional RMA calls." > > MPI-3.0 p456:3ff say > > "In the MPI_WIN_UNIFIED memory model, the rules are much simpler because the public > and private windows are the same. ..." > > and especially p456:34-36 > > "This permits updates to memory with > store operations without requiring an RMA epoch." > > I read all this text and thought that I do not need any additional > synchronization besides the (empty) pt-to-pt Messages. > The members of the RMA working group convinced me > that the MPI_WIN_SYNC is needed to guarantee that a locally > visible X=13 may not be remote visible without the MPI_WIN_SYNC > although the MPI-3.0 text clearly says > "in the RMA unified model, public and private copies are identical". > > Currently, there is no example in this section showing the behavior > in the unified model with only using load/store, i.e. without any > RMA call. All existing examples use some PUT or GET. > > I tried to fill this gap to prevent any mis-interpretation > of p436:37-40 and p456:3-p457:3. > > Best regards > Rolf > > > ----- Original Message ----- >> From: "Jeff Hammond" <jeff.science(a)gmail.com> >> To: "MPI WG Remote Memory Access working group" <mpiwg-rma(a)lists.mpi-forum.org> >> Cc: "Jeff Squyres" <jsquyres(a)cisco.com> >> Sent: Wednesday, February 19, 2014 7:19:14 PM >> Subject: Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings >> >> Other than interactions that are unique to Fortran, I do not >> understand what is unclear about the following text from MPI-3: >> >> "For the purposes of synchronizing the private and public window, >> MPI_WIN_SYNC has the effect of ending and reopening an access and >> exposure epoch on the window." >> >> Thus, the valid usage is prescribed by its effective equivalence to >> "MPI_WIN_UNLOCK; MPI_WIN_LOCK;". I apologize if the WG has been >> sloppy in how we've discussed MPI_WIN_SYNC, but I do not feel the >> standard is ambiguous. >> >> Now, if you are arguing that Fortran is a special problem for >> MPI_WIN_SYNC, then I will gladly support your argument that Fortran >> is >> a special problem for lots of things :-) >> >> Jeff >> >> On Wed, Feb 19, 2014 at 11:44 AM, Rolf Rabenseifner >> <rabenseifner(a)hlrs.de> wrote: >>> Jim, >>> >>> Yes Jim, you are fully right and I updated ticket 413 according to >>> your corrections. >>> Thank you for your carefully reading and your corrections. >>> >>> The reason for this ticket is very simple: >>> Nothing about the use of MPI_Win_sync for the use-case >>> in this example is really explained by MPI-3.0. >>> I expect, that for MPI-4.0, the rules for RMA synchronization >>> for shared memory windows must be revisited. >>> But this would be another ticket. >>> >>> Best regards >>> Rolf >>> >>> ----- Original Message ----- >>>> From: "Jim Dinan" <james.dinan(a)gmail.com> >>>> To: "MPI WG Remote Memory Access working group" >>>> <mpiwg-rma(a)lists.mpi-forum.org> >>>> Cc: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de>, "Jeff Squyres" >>>> <jsquyres(a)cisco.com> >>>> Sent: Monday, February 17, 2014 11:30:42 PM >>>> Subject: Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings >>>> >>>> >>>> Rolf, >>>> >>>> >>>> I think this ticket needs to be reviewed by the RMA WG before >>>> moving >>>> it forward. I would suggest updating the text to incorporate the >>>> following changes: >>>> >>>> >>>> Example 11.13 demonstrates the proper synchronization in the >>>> unified >>>> memory model when a data transfer is implemented with load and >>>> store >>>> (instead of MPI_PUT or MPI_GET) and the synchronization between >>>> processes is performed using point-to-point communication. The >>>> synchronization between processes must be supplemented with a >>>> memory >>>> synchronization through calls to MPI_WIN_SYNC, which act locally >>>> as >>>> a processor-memory barrier. In Fortran, reordering of the >>>> MPI_WIN_SYNC calls must be prevented with MPI_F_SYNC_REG >>>> operations. >>>> >>>> The variable X is contained within a shared memory window and X >>>> corresponds to the same memory location at both processes. The >>>> MPI_WIN_SYNC operation performed by process A ensures completion >>>> of >>>> the load/store operations issued by process A. The MPI_WIN_SYNC >>>> operation performed by process B ensures that process A's updates >>>> to >>>> X are visible to process B. >>>> >>>> In the example, I don't see the reason for the second set of SYNC >>>> operations after B's read of X. If A updates X and B only reads >>>> it, >>>> the second send/recv synchronization should be sufficient. That >>>> is, >>>> B has not made any updates to X that need to be made visible A, >>>> and >>>> B's read of X will be ordered because of the send operation. The >>>> F_SYNC could still be needed to preserve this ordering. >>>> >>>> >>>> ~Jim. >>>> >>>> >>>> >>>> On Mon, Feb 17, 2014 at 12:23 PM, Jeff Hammond < >>>> jeff.science(a)gmail.com > wrote: >>>> >>>> >>>> Switching to the WG list so that everyone is involved... >>>> >>>> I do not see adding an example as so urgent that it needs to be >>>> dealt >>>> with at the next meeting, given how overloaded the relevant people >>>> are. >>>> >>>> Honestly, it is more likely to be read by users if the example and >>>> commentary on it are the subject of a blog post on Squyres' blog. >>>> At >>>> the very least, that will ensure Google indexes it and thus >>>> curious >>>> people will find it (as much cannot be said for the MPI standard >>>> itself). >>>> >>>> Jeff >>>> >>>> >>>> >>>> On Mon, Feb 17, 2014 at 10:50 AM, Rolf Rabenseifner >>>> < rabenseifner(a)hlrs.de > wrote: >>>>> Pavan, >>>>> >>>>> do you put also #413 on the list. >>>>> I believe, it's better to have it on the list >>>>> although it is only an example and therefore the RMA group >>>>> may put it on the errata without plenary. >>>>> Please can you do all what is needed >>>>> that it comes on the MPI-3.0 errata list. >>>>> >>>>> Best regards >>>>> Rolf >>>>> >>>>>> Pavan, >>>>>> thank you for supporting it in the March meeting (Rajeev >>>>>> will >>>>>> not >>>>>> be there). >>>>>> Is there a RMA WG Meeting at the March Forum Meeting? >>>>>> Will you do an MPI-3.0 errata plenary reading >>>>>> or will you put it into the errata by WG dicision, >>>>>> because it is only an example? >>>>>> In both cases #413 should be latest tomorrow on the agenda. >>>>>> >>>>>> Because it is one block of text at one precise location, >>>>>> the ticket format may be enough formalism, i.e., no extra >>>>>> pdf. >>>>> >>>>> ----- Original Message ----- >>>>>> From: "Jim Dinan" < james.dinan(a)gmail.com > >>>>>> To: "Main MPI Forum mailing list" < >>>>>> mpi-forum(a)lists.mpi-forum.org >>>>>> Sent: Monday, February 17, 2014 4:35:51 PM >>>>>> Subject: [Mpi-forum] 3/14: Formal Readings >>>>>> >>>>>> >>>>>> >>>>>> Hi All, >>>>>> >>>>>> >>>>>> The RMA and Hybrid working groups would like to put forward the >>>>>> following tickets for formal readings at the upcoming meeting: >>>>>> >>>>>> >>>>>> #380 - Endpoints proposal >>>>>> >>>>>> >>>>>> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/380/mpi-repo… >>>>>> >>>>>> >>>>>> Read by: Pavan Balaji >>>>>> >>>>>> >>>>>> #349, #402, #404 - Address arithmetic proposal >>>>>> >>>>>> >>>>>> >>>>>> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/349/review-3… >>>>>> >>>>>> >>>>>> >>>>>> Read by: David Goodell >>>>>> #369 - Add same_disp_unit info key for RMA window creation >>>>>> >>>>>> >>>>>> >>>>>> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/369/mpi-repo… >>>>>> >>>>>> >>>>>> >>>>>> Read by: Pavan Balaji >>>>>> >>>>>> Please add these to the agenda. Unfortunately, I will not be >>>>>> able >>>>>> to >>>>>> attend this meeting, so I have included a contact person for >>>>>> each >>>>>> ticket. >>>>>> >>>>>> >>>>>> Thanks! >>>>>> ~Jim. >>>>>> _______________________________________________ >>>>>> mpi-forum mailing list >>>>>> mpi-forum(a)lists.mpi-forum.org >>>>>> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi-forum >>>>> >>>>> -- >>>>> Dr. Rolf Rabenseifner . . . . . . . . . .. email >>>>> rabenseifner(a)hlrs.de >>>>> High Performance Computing Center (HLRS) . phone >>>>> ++49(0)711/685-65530 >>>>> University of Stuttgart . . . . . . . . .. fax ++49(0)711 / >>>>> 685-65832 >>>>> Head of Dpmt Parallel Computing . . . >>>>> www.hlrs.de/people/rabenseifner >>>>> Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room >>>>> 1.307) >>>> >>>> >>>> >>>> -- >>>> Jeff Hammond >>>> jeff.science(a)gmail.com >>>> _______________________________________________ >>>> mpiwg-rma mailing list >>>> mpiwg-rma(a)lists.mpi-forum.org >>>> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma >>> >>> -- >>> Dr. Rolf Rabenseifner . . . . . . . . . .. email >>> rabenseifner(a)hlrs.de >>> High Performance Computing Center (HLRS) . phone >>> ++49(0)711/685-65530 >>> University of Stuttgart . . . . . . . . .. fax ++49(0)711 / >>> 685-65832 >>> Head of Dpmt Parallel Computing . . . >>> www.hlrs.de/people/rabenseifner >>> Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room >>> 1.307) >>> _______________________________________________ >>> mpiwg-rma mailing list >>> mpiwg-rma(a)lists.mpi-forum.org >>> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma >> >> >> >> -- >> Jeff Hammond >> jeff.science(a)gmail.com >> _______________________________________________ >> mpiwg-rma mailing list >> mpiwg-rma(a)lists.mpi-forum.org >> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > > -- > Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de > High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 > Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) > _______________________________________________ > mpiwg-rma mailing list > mpiwg-rma(a)lists.mpi-forum.org > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma

1 0

Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings
by Jim Dinan 20 Feb '14

20 Feb '14

Hi Rolf, I agree -- we have had several discussions in the RMA WG about this ambiguity, but I don't think we have a proposal for a clarification. I think the consensus was that MPI 3.0 is technically correct, albeit it hard to understand. Can we add an MPI_WIN_SYNC advice to users to your proposal? Advice to users: MPI_WIN_SYNC can be used to order store operations and make store updates to the window visible to other processes. Use of this routine is necessary to ensure portable behavior when point-to-point, collective, or shared memory synchronization is used in place of an RMA synchronization routine. MPI_WIN_SYNC should be called by the writer before the non-RMA synchronization operation and by the reader after the non-RMA synchronization, as shown in Example X.YY. ~Jim. On Thu, Feb 20, 2014 at 4:55 AM, Rolf Rabenseifner <rabenseifner(a)hlrs.de>wrote: > Jeff, > > the problem is that we are in the unified model. > > I expect that nobody would expect that > > "the purposes of synchronizing the private and public window" > > (from your cited text) is needed if > > "public and private copies are identical", > > see MPI-3.0 p436:37-40, which say > > "In the RMA unified model, public and private copies are identical and > updates via put > or accumulate calls are eventually observed by load operations without > additional RMA > calls. A store access to a window is eventually visible to remote get or > accumulate calls > without additional RMA calls." > > MPI-3.0 p456:3ff say > > "In the MPI_WIN_UNIFIED memory model, the rules are much simpler because > the public > and private windows are the same. ..." > > and especially p456:34-36 > > "This permits updates to memory with > store operations without requiring an RMA epoch." > > I read all this text and thought that I do not need any additional > synchronization besides the (empty) pt-to-pt Messages. > The members of the RMA working group convinced me > that the MPI_WIN_SYNC is needed to guarantee that a locally > visible X=13 may not be remote visible without the MPI_WIN_SYNC > although the MPI-3.0 text clearly says > "in the RMA unified model, public and private copies are identical". > > Currently, there is no example in this section showing the behavior > in the unified model with only using load/store, i.e. without any > RMA call. All existing examples use some PUT or GET. > > I tried to fill this gap to prevent any mis-interpretation > of p436:37-40 and p456:3-p457:3. > > Best regards > Rolf > > > ----- Original Message ----- > > From: "Jeff Hammond" <jeff.science(a)gmail.com> > > To: "MPI WG Remote Memory Access working group" < > mpiwg-rma(a)lists.mpi-forum.org> > > Cc: "Jeff Squyres" <jsquyres(a)cisco.com> > > Sent: Wednesday, February 19, 2014 7:19:14 PM > > Subject: Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings > > > > Other than interactions that are unique to Fortran, I do not > > understand what is unclear about the following text from MPI-3: > > > > "For the purposes of synchronizing the private and public window, > > MPI_WIN_SYNC has the effect of ending and reopening an access and > > exposure epoch on the window." > > > > Thus, the valid usage is prescribed by its effective equivalence to > > "MPI_WIN_UNLOCK; MPI_WIN_LOCK;". I apologize if the WG has been > > sloppy in how we've discussed MPI_WIN_SYNC, but I do not feel the > > standard is ambiguous. > > > > Now, if you are arguing that Fortran is a special problem for > > MPI_WIN_SYNC, then I will gladly support your argument that Fortran > > is > > a special problem for lots of things :-) > > > > Jeff > > > > On Wed, Feb 19, 2014 at 11:44 AM, Rolf Rabenseifner > > <rabenseifner(a)hlrs.de> wrote: > > > Jim, > > > > > > Yes Jim, you are fully right and I updated ticket 413 according to > > > your corrections. > > > Thank you for your carefully reading and your corrections. > > > > > > The reason for this ticket is very simple: > > > Nothing about the use of MPI_Win_sync for the use-case > > > in this example is really explained by MPI-3.0. > > > I expect, that for MPI-4.0, the rules for RMA synchronization > > > for shared memory windows must be revisited. > > > But this would be another ticket. > > > > > > Best regards > > > Rolf > > > > > > ----- Original Message ----- > > >> From: "Jim Dinan" <james.dinan(a)gmail.com> > > >> To: "MPI WG Remote Memory Access working group" > > >> <mpiwg-rma(a)lists.mpi-forum.org> > > >> Cc: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de>, "Jeff Squyres" > > >> <jsquyres(a)cisco.com> > > >> Sent: Monday, February 17, 2014 11:30:42 PM > > >> Subject: Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings > > >> > > >> > > >> Rolf, > > >> > > >> > > >> I think this ticket needs to be reviewed by the RMA WG before > > >> moving > > >> it forward. I would suggest updating the text to incorporate the > > >> following changes: > > >> > > >> > > >> Example 11.13 demonstrates the proper synchronization in the > > >> unified > > >> memory model when a data transfer is implemented with load and > > >> store > > >> (instead of MPI_PUT or MPI_GET) and the synchronization between > > >> processes is performed using point-to-point communication. The > > >> synchronization between processes must be supplemented with a > > >> memory > > >> synchronization through calls to MPI_WIN_SYNC, which act locally > > >> as > > >> a processor-memory barrier. In Fortran, reordering of the > > >> MPI_WIN_SYNC calls must be prevented with MPI_F_SYNC_REG > > >> operations. > > >> > > >> The variable X is contained within a shared memory window and X > > >> corresponds to the same memory location at both processes. The > > >> MPI_WIN_SYNC operation performed by process A ensures completion > > >> of > > >> the load/store operations issued by process A. The MPI_WIN_SYNC > > >> operation performed by process B ensures that process A's updates > > >> to > > >> X are visible to process B. > > >> > > >> In the example, I don't see the reason for the second set of SYNC > > >> operations after B's read of X. If A updates X and B only reads > > >> it, > > >> the second send/recv synchronization should be sufficient. That > > >> is, > > >> B has not made any updates to X that need to be made visible A, > > >> and > > >> B's read of X will be ordered because of the send operation. The > > >> F_SYNC could still be needed to preserve this ordering. > > >> > > >> > > >> ~Jim. > > >> > > >> > > >> > > >> On Mon, Feb 17, 2014 at 12:23 PM, Jeff Hammond < > > >> jeff.science(a)gmail.com > wrote: > > >> > > >> > > >> Switching to the WG list so that everyone is involved... > > >> > > >> I do not see adding an example as so urgent that it needs to be > > >> dealt > > >> with at the next meeting, given how overloaded the relevant people > > >> are. > > >> > > >> Honestly, it is more likely to be read by users if the example and > > >> commentary on it are the subject of a blog post on Squyres' blog. > > >> At > > >> the very least, that will ensure Google indexes it and thus > > >> curious > > >> people will find it (as much cannot be said for the MPI standard > > >> itself). > > >> > > >> Jeff > > >> > > >> > > >> > > >> On Mon, Feb 17, 2014 at 10:50 AM, Rolf Rabenseifner > > >> < rabenseifner(a)hlrs.de > wrote: > > >> > Pavan, > > >> > > > >> > do you put also #413 on the list. > > >> > I believe, it's better to have it on the list > > >> > although it is only an example and therefore the RMA group > > >> > may put it on the errata without plenary. > > >> > Please can you do all what is needed > > >> > that it comes on the MPI-3.0 errata list. > > >> > > > >> > Best regards > > >> > Rolf > > >> > > > >> >> Pavan, > > >> >> thank you for supporting it in the March meeting (Rajeev > > >> >> will > > >> >> not > > >> >> be there). > > >> >> Is there a RMA WG Meeting at the March Forum Meeting? > > >> >> Will you do an MPI-3.0 errata plenary reading > > >> >> or will you put it into the errata by WG dicision, > > >> >> because it is only an example? > > >> >> In both cases #413 should be latest tomorrow on the agenda. > > >> >> > > >> >> Because it is one block of text at one precise location, > > >> >> the ticket format may be enough formalism, i.e., no extra > > >> >> pdf. > > >> > > > >> > ----- Original Message ----- > > >> >> From: "Jim Dinan" < james.dinan(a)gmail.com > > > >> >> To: "Main MPI Forum mailing list" < > > >> >> mpi-forum(a)lists.mpi-forum.org > > >> >> > > > >> >> Sent: Monday, February 17, 2014 4:35:51 PM > > >> >> Subject: [Mpi-forum] 3/14: Formal Readings > > >> >> > > >> >> > > >> >> > > >> >> Hi All, > > >> >> > > >> >> > > >> >> The RMA and Hybrid working groups would like to put forward the > > >> >> following tickets for formal readings at the upcoming meeting: > > >> >> > > >> >> > > >> >> #380 - Endpoints proposal > > >> >> > > >> >> > > >> >> > https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/380/mpi-repo… > > >> >> > > >> >> > > >> >> Read by: Pavan Balaji > > >> >> > > >> >> > > >> >> #349, #402, #404 - Address arithmetic proposal > > >> >> > > >> >> > > >> >> > > >> >> > https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/349/review-3… > > >> >> > > >> >> > > >> >> > > >> >> Read by: David Goodell > > >> >> #369 - Add same_disp_unit info key for RMA window creation > > >> >> > > >> >> > > >> >> > > >> >> > https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/369/mpi-repo… > > >> >> > > >> >> > > >> >> > > >> >> Read by: Pavan Balaji > > >> >> > > >> >> Please add these to the agenda. Unfortunately, I will not be > > >> >> able > > >> >> to > > >> >> attend this meeting, so I have included a contact person for > > >> >> each > > >> >> ticket. > > >> >> > > >> >> > > >> >> Thanks! > > >> >> ~Jim. > > >> >> _______________________________________________ > > >> >> mpi-forum mailing list > > >> >> mpi-forum(a)lists.mpi-forum.org > > >> >> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi-forum > > >> > > > >> > -- > > >> > Dr. Rolf Rabenseifner . . . . . . . . . .. email > > >> > rabenseifner(a)hlrs.de > > >> > High Performance Computing Center (HLRS) . phone > > >> > ++49(0)711/685-65530 > > >> > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / > > >> > 685-65832 > > >> > Head of Dpmt Parallel Computing . . . > > >> > www.hlrs.de/people/rabenseifner > > >> > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room > > >> > 1.307) > > >> > > >> > > >> > > >> -- > > >> Jeff Hammond > > >> jeff.science(a)gmail.com > > >> _______________________________________________ > > >> mpiwg-rma mailing list > > >> mpiwg-rma(a)lists.mpi-forum.org > > >> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > > >> > > >> > > > > > > -- > > > Dr. Rolf Rabenseifner . . . . . . . . . .. email > > > rabenseifner(a)hlrs.de > > > High Performance Computing Center (HLRS) . phone > > > ++49(0)711/685-65530 > > > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / > > > 685-65832 > > > Head of Dpmt Parallel Computing . . . > > > www.hlrs.de/people/rabenseifner > > > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room > > > 1.307) > > > _______________________________________________ > > > mpiwg-rma mailing list > > > mpiwg-rma(a)lists.mpi-forum.org > > > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > > > > > > > > -- > > Jeff Hammond > > jeff.science(a)gmail.com > > _______________________________________________ > > mpiwg-rma mailing list > > mpiwg-rma(a)lists.mpi-forum.org > > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > > > > -- > Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de > High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 > Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) > _______________________________________________ > mpiwg-rma mailing list > mpiwg-rma(a)lists.mpi-forum.org > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma >

1 0

Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings
by Rolf Rabenseifner 20 Feb '14

20 Feb '14

Jeff, the problem is that we are in the unified model. I expect that nobody would expect that "the purposes of synchronizing the private and public window" (from your cited text) is needed if "public and private copies are identical", see MPI-3.0 p436:37-40, which say "In the RMA unified model, public and private copies are identical and updates via put or accumulate calls are eventually observed by load operations without additional RMA calls. A store access to a window is eventually visible to remote get or accumulate calls without additional RMA calls." MPI-3.0 p456:3ff say "In the MPI_WIN_UNIFIED memory model, the rules are much simpler because the public and private windows are the same. ..." and especially p456:34-36 "This permits updates to memory with store operations without requiring an RMA epoch." I read all this text and thought that I do not need any additional synchronization besides the (empty) pt-to-pt Messages. The members of the RMA working group convinced me that the MPI_WIN_SYNC is needed to guarantee that a locally visible X=13 may not be remote visible without the MPI_WIN_SYNC although the MPI-3.0 text clearly says "in the RMA unified model, public and private copies are identical". Currently, there is no example in this section showing the behavior in the unified model with only using load/store, i.e. without any RMA call. All existing examples use some PUT or GET. I tried to fill this gap to prevent any mis-interpretation of p436:37-40 and p456:3-p457:3. Best regards Rolf ----- Original Message ----- > From: "Jeff Hammond" <jeff.science(a)gmail.com> > To: "MPI WG Remote Memory Access working group" <mpiwg-rma(a)lists.mpi-forum.org> > Cc: "Jeff Squyres" <jsquyres(a)cisco.com> > Sent: Wednesday, February 19, 2014 7:19:14 PM > Subject: Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings > > Other than interactions that are unique to Fortran, I do not > understand what is unclear about the following text from MPI-3: > > "For the purposes of synchronizing the private and public window, > MPI_WIN_SYNC has the effect of ending and reopening an access and > exposure epoch on the window." > > Thus, the valid usage is prescribed by its effective equivalence to > "MPI_WIN_UNLOCK; MPI_WIN_LOCK;". I apologize if the WG has been > sloppy in how we've discussed MPI_WIN_SYNC, but I do not feel the > standard is ambiguous. > > Now, if you are arguing that Fortran is a special problem for > MPI_WIN_SYNC, then I will gladly support your argument that Fortran > is > a special problem for lots of things :-) > > Jeff > > On Wed, Feb 19, 2014 at 11:44 AM, Rolf Rabenseifner > <rabenseifner(a)hlrs.de> wrote: > > Jim, > > > > Yes Jim, you are fully right and I updated ticket 413 according to > > your corrections. > > Thank you for your carefully reading and your corrections. > > > > The reason for this ticket is very simple: > > Nothing about the use of MPI_Win_sync for the use-case > > in this example is really explained by MPI-3.0. > > I expect, that for MPI-4.0, the rules for RMA synchronization > > for shared memory windows must be revisited. > > But this would be another ticket. > > > > Best regards > > Rolf > > > > ----- Original Message ----- > >> From: "Jim Dinan" <james.dinan(a)gmail.com> > >> To: "MPI WG Remote Memory Access working group" > >> <mpiwg-rma(a)lists.mpi-forum.org> > >> Cc: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de>, "Jeff Squyres" > >> <jsquyres(a)cisco.com> > >> Sent: Monday, February 17, 2014 11:30:42 PM > >> Subject: Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings > >> > >> > >> Rolf, > >> > >> > >> I think this ticket needs to be reviewed by the RMA WG before > >> moving > >> it forward. I would suggest updating the text to incorporate the > >> following changes: > >> > >> > >> Example 11.13 demonstrates the proper synchronization in the > >> unified > >> memory model when a data transfer is implemented with load and > >> store > >> (instead of MPI_PUT or MPI_GET) and the synchronization between > >> processes is performed using point-to-point communication. The > >> synchronization between processes must be supplemented with a > >> memory > >> synchronization through calls to MPI_WIN_SYNC, which act locally > >> as > >> a processor-memory barrier. In Fortran, reordering of the > >> MPI_WIN_SYNC calls must be prevented with MPI_F_SYNC_REG > >> operations. > >> > >> The variable X is contained within a shared memory window and X > >> corresponds to the same memory location at both processes. The > >> MPI_WIN_SYNC operation performed by process A ensures completion > >> of > >> the load/store operations issued by process A. The MPI_WIN_SYNC > >> operation performed by process B ensures that process A's updates > >> to > >> X are visible to process B. > >> > >> In the example, I don't see the reason for the second set of SYNC > >> operations after B's read of X. If A updates X and B only reads > >> it, > >> the second send/recv synchronization should be sufficient. That > >> is, > >> B has not made any updates to X that need to be made visible A, > >> and > >> B's read of X will be ordered because of the send operation. The > >> F_SYNC could still be needed to preserve this ordering. > >> > >> > >> ~Jim. > >> > >> > >> > >> On Mon, Feb 17, 2014 at 12:23 PM, Jeff Hammond < > >> jeff.science(a)gmail.com > wrote: > >> > >> > >> Switching to the WG list so that everyone is involved... > >> > >> I do not see adding an example as so urgent that it needs to be > >> dealt > >> with at the next meeting, given how overloaded the relevant people > >> are. > >> > >> Honestly, it is more likely to be read by users if the example and > >> commentary on it are the subject of a blog post on Squyres' blog. > >> At > >> the very least, that will ensure Google indexes it and thus > >> curious > >> people will find it (as much cannot be said for the MPI standard > >> itself). > >> > >> Jeff > >> > >> > >> > >> On Mon, Feb 17, 2014 at 10:50 AM, Rolf Rabenseifner > >> < rabenseifner(a)hlrs.de > wrote: > >> > Pavan, > >> > > >> > do you put also #413 on the list. > >> > I believe, it's better to have it on the list > >> > although it is only an example and therefore the RMA group > >> > may put it on the errata without plenary. > >> > Please can you do all what is needed > >> > that it comes on the MPI-3.0 errata list. > >> > > >> > Best regards > >> > Rolf > >> > > >> >> Pavan, > >> >> thank you for supporting it in the March meeting (Rajeev > >> >> will > >> >> not > >> >> be there). > >> >> Is there a RMA WG Meeting at the March Forum Meeting? > >> >> Will you do an MPI-3.0 errata plenary reading > >> >> or will you put it into the errata by WG dicision, > >> >> because it is only an example? > >> >> In both cases #413 should be latest tomorrow on the agenda. > >> >> > >> >> Because it is one block of text at one precise location, > >> >> the ticket format may be enough formalism, i.e., no extra > >> >> pdf. > >> > > >> > ----- Original Message ----- > >> >> From: "Jim Dinan" < james.dinan(a)gmail.com > > >> >> To: "Main MPI Forum mailing list" < > >> >> mpi-forum(a)lists.mpi-forum.org > >> >> > > >> >> Sent: Monday, February 17, 2014 4:35:51 PM > >> >> Subject: [Mpi-forum] 3/14: Formal Readings > >> >> > >> >> > >> >> > >> >> Hi All, > >> >> > >> >> > >> >> The RMA and Hybrid working groups would like to put forward the > >> >> following tickets for formal readings at the upcoming meeting: > >> >> > >> >> > >> >> #380 - Endpoints proposal > >> >> > >> >> > >> >> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/380/mpi-repo… > >> >> > >> >> > >> >> Read by: Pavan Balaji > >> >> > >> >> > >> >> #349, #402, #404 - Address arithmetic proposal > >> >> > >> >> > >> >> > >> >> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/349/review-3… > >> >> > >> >> > >> >> > >> >> Read by: David Goodell > >> >> #369 - Add same_disp_unit info key for RMA window creation > >> >> > >> >> > >> >> > >> >> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/369/mpi-repo… > >> >> > >> >> > >> >> > >> >> Read by: Pavan Balaji > >> >> > >> >> Please add these to the agenda. Unfortunately, I will not be > >> >> able > >> >> to > >> >> attend this meeting, so I have included a contact person for > >> >> each > >> >> ticket. > >> >> > >> >> > >> >> Thanks! > >> >> ~Jim. > >> >> _______________________________________________ > >> >> mpi-forum mailing list > >> >> mpi-forum(a)lists.mpi-forum.org > >> >> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi-forum > >> > > >> > -- > >> > Dr. Rolf Rabenseifner . . . . . . . . . .. email > >> > rabenseifner(a)hlrs.de > >> > High Performance Computing Center (HLRS) . phone > >> > ++49(0)711/685-65530 > >> > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / > >> > 685-65832 > >> > Head of Dpmt Parallel Computing . . . > >> > www.hlrs.de/people/rabenseifner > >> > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room > >> > 1.307) > >> > >> > >> > >> -- > >> Jeff Hammond > >> jeff.science(a)gmail.com > >> _______________________________________________ > >> mpiwg-rma mailing list > >> mpiwg-rma(a)lists.mpi-forum.org > >> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > >> > >> > > > > -- > > Dr. Rolf Rabenseifner . . . . . . . . . .. email > > rabenseifner(a)hlrs.de > > High Performance Computing Center (HLRS) . phone > > ++49(0)711/685-65530 > > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / > > 685-65832 > > Head of Dpmt Parallel Computing . . . > > www.hlrs.de/people/rabenseifner > > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room > > 1.307) > > _______________________________________________ > > mpiwg-rma mailing list > > mpiwg-rma(a)lists.mpi-forum.org > > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > > > > -- > Jeff Hammond > jeff.science(a)gmail.com > _______________________________________________ > mpiwg-rma mailing list > mpiwg-rma(a)lists.mpi-forum.org > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307)

1 0

Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings
by Jeff Hammond 19 Feb '14

19 Feb '14

Other than interactions that are unique to Fortran, I do not understand what is unclear about the following text from MPI-3: "For the purposes of synchronizing the private and public window, MPI_WIN_SYNC has the effect of ending and reopening an access and exposure epoch on the window." Thus, the valid usage is prescribed by its effective equivalence to "MPI_WIN_UNLOCK; MPI_WIN_LOCK;". I apologize if the WG has been sloppy in how we've discussed MPI_WIN_SYNC, but I do not feel the standard is ambiguous. Now, if you are arguing that Fortran is a special problem for MPI_WIN_SYNC, then I will gladly support your argument that Fortran is a special problem for lots of things :-) Jeff On Wed, Feb 19, 2014 at 11:44 AM, Rolf Rabenseifner <rabenseifner(a)hlrs.de> wrote: > Jim, > > Yes Jim, you are fully right and I updated ticket 413 according to > your corrections. > Thank you for your carefully reading and your corrections. > > The reason for this ticket is very simple: > Nothing about the use of MPI_Win_sync for the use-case > in this example is really explained by MPI-3.0. > I expect, that for MPI-4.0, the rules for RMA synchronization > for shared memory windows must be revisited. > But this would be another ticket. > > Best regards > Rolf > > ----- Original Message ----- >> From: "Jim Dinan" <james.dinan(a)gmail.com> >> To: "MPI WG Remote Memory Access working group" <mpiwg-rma(a)lists.mpi-forum.org> >> Cc: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de>, "Jeff Squyres" <jsquyres(a)cisco.com> >> Sent: Monday, February 17, 2014 11:30:42 PM >> Subject: Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings >> >> >> Rolf, >> >> >> I think this ticket needs to be reviewed by the RMA WG before moving >> it forward. I would suggest updating the text to incorporate the >> following changes: >> >> >> Example 11.13 demonstrates the proper synchronization in the unified >> memory model when a data transfer is implemented with load and store >> (instead of MPI_PUT or MPI_GET) and the synchronization between >> processes is performed using point-to-point communication. The >> synchronization between processes must be supplemented with a memory >> synchronization through calls to MPI_WIN_SYNC, which act locally as >> a processor-memory barrier. In Fortran, reordering of the >> MPI_WIN_SYNC calls must be prevented with MPI_F_SYNC_REG operations. >> >> The variable X is contained within a shared memory window and X >> corresponds to the same memory location at both processes. The >> MPI_WIN_SYNC operation performed by process A ensures completion of >> the load/store operations issued by process A. The MPI_WIN_SYNC >> operation performed by process B ensures that process A's updates to >> X are visible to process B. >> >> In the example, I don't see the reason for the second set of SYNC >> operations after B's read of X. If A updates X and B only reads it, >> the second send/recv synchronization should be sufficient. That is, >> B has not made any updates to X that need to be made visible A, and >> B's read of X will be ordered because of the send operation. The >> F_SYNC could still be needed to preserve this ordering. >> >> >> ~Jim. >> >> >> >> On Mon, Feb 17, 2014 at 12:23 PM, Jeff Hammond < >> jeff.science(a)gmail.com > wrote: >> >> >> Switching to the WG list so that everyone is involved... >> >> I do not see adding an example as so urgent that it needs to be dealt >> with at the next meeting, given how overloaded the relevant people >> are. >> >> Honestly, it is more likely to be read by users if the example and >> commentary on it are the subject of a blog post on Squyres' blog. At >> the very least, that will ensure Google indexes it and thus curious >> people will find it (as much cannot be said for the MPI standard >> itself). >> >> Jeff >> >> >> >> On Mon, Feb 17, 2014 at 10:50 AM, Rolf Rabenseifner >> < rabenseifner(a)hlrs.de > wrote: >> > Pavan, >> > >> > do you put also #413 on the list. >> > I believe, it's better to have it on the list >> > although it is only an example and therefore the RMA group >> > may put it on the errata without plenary. >> > Please can you do all what is needed >> > that it comes on the MPI-3.0 errata list. >> > >> > Best regards >> > Rolf >> > >> >> Pavan, >> >> thank you for supporting it in the March meeting (Rajeev will >> >> not >> >> be there). >> >> Is there a RMA WG Meeting at the March Forum Meeting? >> >> Will you do an MPI-3.0 errata plenary reading >> >> or will you put it into the errata by WG dicision, >> >> because it is only an example? >> >> In both cases #413 should be latest tomorrow on the agenda. >> >> >> >> Because it is one block of text at one precise location, >> >> the ticket format may be enough formalism, i.e., no extra pdf. >> > >> > ----- Original Message ----- >> >> From: "Jim Dinan" < james.dinan(a)gmail.com > >> >> To: "Main MPI Forum mailing list" < mpi-forum(a)lists.mpi-forum.org >> >> > >> >> Sent: Monday, February 17, 2014 4:35:51 PM >> >> Subject: [Mpi-forum] 3/14: Formal Readings >> >> >> >> >> >> >> >> Hi All, >> >> >> >> >> >> The RMA and Hybrid working groups would like to put forward the >> >> following tickets for formal readings at the upcoming meeting: >> >> >> >> >> >> #380 - Endpoints proposal >> >> >> >> >> >> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/380/mpi-repo… >> >> >> >> >> >> Read by: Pavan Balaji >> >> >> >> >> >> #349, #402, #404 - Address arithmetic proposal >> >> >> >> >> >> >> >> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/349/review-3… >> >> >> >> >> >> >> >> Read by: David Goodell >> >> #369 - Add same_disp_unit info key for RMA window creation >> >> >> >> >> >> >> >> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/369/mpi-repo… >> >> >> >> >> >> >> >> Read by: Pavan Balaji >> >> >> >> Please add these to the agenda. Unfortunately, I will not be able >> >> to >> >> attend this meeting, so I have included a contact person for each >> >> ticket. >> >> >> >> >> >> Thanks! >> >> ~Jim. >> >> _______________________________________________ >> >> mpi-forum mailing list >> >> mpi-forum(a)lists.mpi-forum.org >> >> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi-forum >> > >> > -- >> > Dr. Rolf Rabenseifner . . . . . . . . . .. email >> > rabenseifner(a)hlrs.de >> > High Performance Computing Center (HLRS) . phone >> > ++49(0)711/685-65530 >> > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / >> > 685-65832 >> > Head of Dpmt Parallel Computing . . . >> > www.hlrs.de/people/rabenseifner >> > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room >> > 1.307) >> >> >> >> -- >> Jeff Hammond >> jeff.science(a)gmail.com >> _______________________________________________ >> mpiwg-rma mailing list >> mpiwg-rma(a)lists.mpi-forum.org >> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma >> >> > > -- > Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de > High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 > Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) > _______________________________________________ > mpiwg-rma mailing list > mpiwg-rma(a)lists.mpi-forum.org > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma -- Jeff Hammond jeff.science(a)gmail.com

1 0

Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings
by Rolf Rabenseifner 19 Feb '14

19 Feb '14

Jim, Yes Jim, you are fully right and I updated ticket 413 according to your corrections. Thank you for your carefully reading and your corrections. The reason for this ticket is very simple: Nothing about the use of MPI_Win_sync for the use-case in this example is really explained by MPI-3.0. I expect, that for MPI-4.0, the rules for RMA synchronization for shared memory windows must be revisited. But this would be another ticket. Best regards Rolf ----- Original Message ----- > From: "Jim Dinan" <james.dinan(a)gmail.com> > To: "MPI WG Remote Memory Access working group" <mpiwg-rma(a)lists.mpi-forum.org> > Cc: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de>, "Jeff Squyres" <jsquyres(a)cisco.com> > Sent: Monday, February 17, 2014 11:30:42 PM > Subject: Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings > > > Rolf, > > > I think this ticket needs to be reviewed by the RMA WG before moving > it forward. I would suggest updating the text to incorporate the > following changes: > > > Example 11.13 demonstrates the proper synchronization in the unified > memory model when a data transfer is implemented with load and store > (instead of MPI_PUT or MPI_GET) and the synchronization between > processes is performed using point-to-point communication. The > synchronization between processes must be supplemented with a memory > synchronization through calls to MPI_WIN_SYNC, which act locally as > a processor-memory barrier. In Fortran, reordering of the > MPI_WIN_SYNC calls must be prevented with MPI_F_SYNC_REG operations. > > The variable X is contained within a shared memory window and X > corresponds to the same memory location at both processes. The > MPI_WIN_SYNC operation performed by process A ensures completion of > the load/store operations issued by process A. The MPI_WIN_SYNC > operation performed by process B ensures that process A's updates to > X are visible to process B. > > In the example, I don't see the reason for the second set of SYNC > operations after B's read of X. If A updates X and B only reads it, > the second send/recv synchronization should be sufficient. That is, > B has not made any updates to X that need to be made visible A, and > B's read of X will be ordered because of the send operation. The > F_SYNC could still be needed to preserve this ordering. > > > ~Jim. > > > > On Mon, Feb 17, 2014 at 12:23 PM, Jeff Hammond < > jeff.science(a)gmail.com > wrote: > > > Switching to the WG list so that everyone is involved... > > I do not see adding an example as so urgent that it needs to be dealt > with at the next meeting, given how overloaded the relevant people > are. > > Honestly, it is more likely to be read by users if the example and > commentary on it are the subject of a blog post on Squyres' blog. At > the very least, that will ensure Google indexes it and thus curious > people will find it (as much cannot be said for the MPI standard > itself). > > Jeff > > > > On Mon, Feb 17, 2014 at 10:50 AM, Rolf Rabenseifner > < rabenseifner(a)hlrs.de > wrote: > > Pavan, > > > > do you put also #413 on the list. > > I believe, it's better to have it on the list > > although it is only an example and therefore the RMA group > > may put it on the errata without plenary. > > Please can you do all what is needed > > that it comes on the MPI-3.0 errata list. > > > > Best regards > > Rolf > > > >> Pavan, > >> thank you for supporting it in the March meeting (Rajeev will > >> not > >> be there). > >> Is there a RMA WG Meeting at the March Forum Meeting? > >> Will you do an MPI-3.0 errata plenary reading > >> or will you put it into the errata by WG dicision, > >> because it is only an example? > >> In both cases #413 should be latest tomorrow on the agenda. > >> > >> Because it is one block of text at one precise location, > >> the ticket format may be enough formalism, i.e., no extra pdf. > > > > ----- Original Message ----- > >> From: "Jim Dinan" < james.dinan(a)gmail.com > > >> To: "Main MPI Forum mailing list" < mpi-forum(a)lists.mpi-forum.org > >> > > >> Sent: Monday, February 17, 2014 4:35:51 PM > >> Subject: [Mpi-forum] 3/14: Formal Readings > >> > >> > >> > >> Hi All, > >> > >> > >> The RMA and Hybrid working groups would like to put forward the > >> following tickets for formal readings at the upcoming meeting: > >> > >> > >> #380 - Endpoints proposal > >> > >> > >> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/380/mpi-repo… > >> > >> > >> Read by: Pavan Balaji > >> > >> > >> #349, #402, #404 - Address arithmetic proposal > >> > >> > >> > >> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/349/review-3… > >> > >> > >> > >> Read by: David Goodell > >> #369 - Add same_disp_unit info key for RMA window creation > >> > >> > >> > >> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/369/mpi-repo… > >> > >> > >> > >> Read by: Pavan Balaji > >> > >> Please add these to the agenda. Unfortunately, I will not be able > >> to > >> attend this meeting, so I have included a contact person for each > >> ticket. > >> > >> > >> Thanks! > >> ~Jim. > >> _______________________________________________ > >> mpi-forum mailing list > >> mpi-forum(a)lists.mpi-forum.org > >> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi-forum > > > > -- > > Dr. Rolf Rabenseifner . . . . . . . . . .. email > > rabenseifner(a)hlrs.de > > High Performance Computing Center (HLRS) . phone > > ++49(0)711/685-65530 > > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / > > 685-65832 > > Head of Dpmt Parallel Computing . . . > > www.hlrs.de/people/rabenseifner > > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room > > 1.307) > > > > -- > Jeff Hammond > jeff.science(a)gmail.com > _______________________________________________ > mpiwg-rma mailing list > mpiwg-rma(a)lists.mpi-forum.org > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > > -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307)

1 0

Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings
by Jim Dinan 17 Feb '14

17 Feb '14

Rolf, I think this ticket needs to be reviewed by the RMA WG before moving it forward. I would suggest updating the text to incorporate the following changes: Example 11.13 demonstrates the proper synchronization in the unified memory model when a data transfer is implemented with load and store (instead of MPI_PUT or MPI_GET) and the synchronization between processes is performed using point-to-point communication. The synchronization between processes must be supplemented with a memory synchronization through calls to MPI_WIN_SYNC, which act locally as a processor-memory barrier. In Fortran, reordering of the MPI_WIN_SYNC calls must be prevented with MPI_F_SYNC_REG operations. The variable X is contained within a shared memory window and X corresponds to the same memory location at both processes. The MPI_WIN_SYNC operation performed by process A ensures completion of the load/store operations issued by process A. The MPI_WIN_SYNC operation performed by process B ensures that process A's updates to X are visible to process B. In the example, I don't see the reason for the second set of SYNC operations after B's read of X. If A updates X and B only reads it, the second send/recv synchronization should be sufficient. That is, B has not made any updates to X that need to be made visible A, and B's read of X will be ordered because of the send operation. The F_SYNC could still be needed to preserve this ordering. ~Jim. On Mon, Feb 17, 2014 at 12:23 PM, Jeff Hammond <jeff.science(a)gmail.com>wrote: > Switching to the WG list so that everyone is involved... > > I do not see adding an example as so urgent that it needs to be dealt > with at the next meeting, given how overloaded the relevant people > are. > > Honestly, it is more likely to be read by users if the example and > commentary on it are the subject of a blog post on Squyres' blog. At > the very least, that will ensure Google indexes it and thus curious > people will find it (as much cannot be said for the MPI standard > itself). > > Jeff > > On Mon, Feb 17, 2014 at 10:50 AM, Rolf Rabenseifner > <rabenseifner(a)hlrs.de> wrote: > > Pavan, > > > > do you put also #413 on the list. > > I believe, it's better to have it on the list > > although it is only an example and therefore the RMA group > > may put it on the errata without plenary. > > Please can you do all what is needed > > that it comes on the MPI-3.0 errata list. > > > > Best regards > > Rolf > > > >> Pavan, > >> thank you for supporting it in the March meeting (Rajeev will not > >> be there). > >> Is there a RMA WG Meeting at the March Forum Meeting? > >> Will you do an MPI-3.0 errata plenary reading > >> or will you put it into the errata by WG dicision, > >> because it is only an example? > >> In both cases #413 should be latest tomorrow on the agenda. > >> > >> Because it is one block of text at one precise location, > >> the ticket format may be enough formalism, i.e., no extra pdf. > > > > ----- Original Message ----- > >> From: "Jim Dinan" <james.dinan(a)gmail.com> > >> To: "Main MPI Forum mailing list" <mpi-forum(a)lists.mpi-forum.org> > >> Sent: Monday, February 17, 2014 4:35:51 PM > >> Subject: [Mpi-forum] 3/14: Formal Readings > >> > >> > >> > >> Hi All, > >> > >> > >> The RMA and Hybrid working groups would like to put forward the > >> following tickets for formal readings at the upcoming meeting: > >> > >> > >> #380 - Endpoints proposal > >> > >> > >> > https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/380/mpi-repo… > >> > >> > >> Read by: Pavan Balaji > >> > >> > >> #349, #402, #404 - Address arithmetic proposal > >> > >> > >> > >> > https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/349/review-3… > >> > >> > >> > >> Read by: David Goodell > >> #369 - Add same_disp_unit info key for RMA window creation > >> > >> > >> > >> > https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/369/mpi-repo… > >> > >> > >> > >> Read by: Pavan Balaji > >> > >> Please add these to the agenda. Unfortunately, I will not be able to > >> attend this meeting, so I have included a contact person for each > >> ticket. > >> > >> > >> Thanks! > >> ~Jim. > >> _______________________________________________ > >> mpi-forum mailing list > >> mpi-forum(a)lists.mpi-forum.org > >> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi-forum > > > > -- > > Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de > > High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 > > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 > > Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner > > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) > > > > -- > Jeff Hammond > jeff.science(a)gmail.com > _______________________________________________ > mpiwg-rma mailing list > mpiwg-rma(a)lists.mpi-forum.org > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma >

1 0

Re: [mpiwg-rma] [Mpi-forum] 3/14: Formal Readings
by Jeff Hammond 17 Feb '14

17 Feb '14

Switching to the WG list so that everyone is involved... I do not see adding an example as so urgent that it needs to be dealt with at the next meeting, given how overloaded the relevant people are. Honestly, it is more likely to be read by users if the example and commentary on it are the subject of a blog post on Squyres' blog. At the very least, that will ensure Google indexes it and thus curious people will find it (as much cannot be said for the MPI standard itself). Jeff On Mon, Feb 17, 2014 at 10:50 AM, Rolf Rabenseifner <rabenseifner(a)hlrs.de> wrote: > Pavan, > > do you put also #413 on the list. > I believe, it's better to have it on the list > although it is only an example and therefore the RMA group > may put it on the errata without plenary. > Please can you do all what is needed > that it comes on the MPI-3.0 errata list. > > Best regards > Rolf > >> Pavan, >> thank you for supporting it in the March meeting (Rajeev will not >> be there). >> Is there a RMA WG Meeting at the March Forum Meeting? >> Will you do an MPI-3.0 errata plenary reading >> or will you put it into the errata by WG dicision, >> because it is only an example? >> In both cases #413 should be latest tomorrow on the agenda. >> >> Because it is one block of text at one precise location, >> the ticket format may be enough formalism, i.e., no extra pdf. > > ----- Original Message ----- >> From: "Jim Dinan" <james.dinan(a)gmail.com> >> To: "Main MPI Forum mailing list" <mpi-forum(a)lists.mpi-forum.org> >> Sent: Monday, February 17, 2014 4:35:51 PM >> Subject: [Mpi-forum] 3/14: Formal Readings >> >> >> >> Hi All, >> >> >> The RMA and Hybrid working groups would like to put forward the >> following tickets for formal readings at the upcoming meeting: >> >> >> #380 - Endpoints proposal >> >> >> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/380/mpi-repo… >> >> >> Read by: Pavan Balaji >> >> >> #349, #402, #404 - Address arithmetic proposal >> >> >> >> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/349/review-3… >> >> >> >> Read by: David Goodell >> #369 - Add same_disp_unit info key for RMA window creation >> >> >> >> https://svn.mpi-forum.org/trac/mpi-forum-web/attachment/ticket/369/mpi-repo… >> >> >> >> Read by: Pavan Balaji >> >> Please add these to the agenda. Unfortunately, I will not be able to >> attend this meeting, so I have included a contact person for each >> ticket. >> >> >> Thanks! >> ~Jim. >> _______________________________________________ >> mpi-forum mailing list >> mpi-forum(a)lists.mpi-forum.org >> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi-forum > > -- > Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de > High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 > Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) -- Jeff Hammond jeff.science(a)gmail.com

1 0

Re: [mpiwg-rma] Input needed for the Agenda for MPI Forum Meeting in March
by William Gropp 17 Feb '14

17 Feb '14

Thanks, Jim. This helps. Bill William Gropp Director, Parallel Computing Institute Deputy Director for Research Institute for Advanced Computing Applications and Technologies Thomas M. Siebel Chair in Computer Science University of Illinois Urbana-Champaign On Feb 17, 2014, at 9:24 AM, Jim Dinan wrote: > Hi Bill, > > I updated the wiki page, with some more tickets. Note that some of the open tickets that I added were capturing an idea or a question that came up in discussion, so they need not all receive discussion at the upcoming meeting. Unfortunately, I won't be able to attend this meeting. Depending on the timing, if there is a bridge set up, I may be able to dial in. > > Best, > ~Jim. > > > On Fri, Feb 14, 2014 at 4:28 PM, William Gropp <wgropp(a)illinois.edu> wrote: > We should construct a list of our open items - I've set up a wiki page for this at https://svn.mpi-forum.org/trac/mpi-forum-web/wiki/mpi3-rma-agenda . Please populate the page. From there, we can answer Martin's question. > > Bill > > William Gropp > Director, Parallel Computing Institute > Deputy Director for Research > Institute for Advanced Computing Applications and Technologies > Thomas M. Siebel Chair in Computer Science > University of Illinois Urbana-Champaign > > > > > On Feb 14, 2014, at 3:02 PM, Rajeev Thakur wrote: > >> How much time does the RMA working group need at the next meeting? >> >> Rajeev >> >> Begin forwarded message: >> >>> From: "Schulz, Martin" <schulzm(a)llnl.gov> >>> Subject: Re: Input needed for the Agenda for MPI Forum Meeting in March >>> Date: February 14, 2014 2:54:07 PM CST >>> To: Torsten Hoefler <htor(a)inf.ethz.ch>, "Wesley B. Bland" <wbland(a)mcs.anl.gov>, Aurélien Bouteiller <bouteill(a)icl.utk.edu>, Richard Graham <richardg(a)mellanox.com>, Fab Tillier <ftillier(a)microsoft.com>, Pavan Balaji <balaji(a)mcs.anl.gov>, Craig Rasmussen <rasmus(a)cas.uoregon.edu>, Quincey Koziol <koziol(a)hdfgroup.org>, "Mohamad Chaarawi" <chaarawi(a)hdfgroup.org>, Anthony Skjellum <tony(a)cis.uab.edu>, "Brian W Barrett" <bwbarre(a)sandia.gov>, William Gropp <wgropp(a)uiuc.edu>, "Rajeev Thakur" <thakur(a)mcs.anl.gov>, Kathryn Mohror <kathryn(a)llnl.gov> >>> Cc: Purushotham Bangalore <puri(a)cis.uab.edu>, Amin Hassani <ahassani(a)cis.uab.edu> >>> Reply-To: Martin Schulz <schulzm(a)llnl.gov> >>> >>> Hi all, >>> >>> Any more requests for the next meeting? So far I have heard only from a small subset of the WGs. Also, please remember that the deadline to send texts for readings and votes is next Monday 2pm PT. >>> >>> Thanks! >>> >>> Martin >>> >>> >>> On Feb 11, 2014, at 10:30 PM, "Schulz, Martin" <schulzm(a)llnl.gov> wrote: >>> >>>> Dear MPI Forum WG leads, >>>> >>>> I am in the process of putting together the agenda for the next forum meeting in the next few weeks and will be putting up a first draft in the next few days. To help me with this, please send me the following information for your WG(s): >>>> >>>> - Any tickets for readings or votes that the WG wants to bring up? >>>> - For readings: how much time would you like reserved for this? >>>> - Any additional plenary times for WG topics? >>>> - How much WG time would you like? >>>> - For the WG time: any major conflicts that I should be aware of? >>>> >>>> Thanks! >>>> >>>> Martin >>>> >>>> >>>> ________________________________________________________________________ >>>> Martin Schulz, schulzm(a)llnl.gov, http://people.llnl.gov/schulzm >>>> CASC @ Lawrence Livermore National Laboratory, Livermore, USA >>>> >>>> >>>> >>> >>> ________________________________________________________________________ >>> Martin Schulz, schulzm(a)llnl.gov, http://people.llnl.gov/schulzm >>> CASC @ Lawrence Livermore National Laboratory, Livermore, USA >>> >>> >>> >> >> _______________________________________________ >> mpiwg-rma mailing list >> mpiwg-rma(a)lists.mpi-forum.org >> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > > > _______________________________________________ > mpiwg-rma mailing list > mpiwg-rma(a)lists.mpi-forum.org > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > > _______________________________________________ > mpiwg-rma mailing list > mpiwg-rma(a)lists.mpi-forum.org > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma

1 0

Re: [mpiwg-rma] Fwd: Input needed for the Agenda for MPI Forum Meeting in March
by Jeff Hammond 17 Feb '14

17 Feb '14

I am leaving Tuesday night after the Forum for Annapolis. Jim is going to OpenSHMEM but not the Forum last time I heard. I believe Brian is heads-down on AWS now and won't be involved in the Forum any more, but I could be wrong. Jeff On Mon, Feb 17, 2014 at 10:13 AM, Rajeev Thakur <thakur(a)mcs.anl.gov> wrote: > Do we need the working group meeting at a specific time? Are some people leaving for the OpenSHMEM workshop? > > Rajeev > > On Feb 17, 2014, at 9:24 AM, Jim Dinan <james.dinan(a)gmail.com> > wrote: > >> Hi Bill, >> >> I updated the wiki page, with some more tickets. Note that some of the open tickets that I added were capturing an idea or a question that came up in discussion, so they need not all receive discussion at the upcoming meeting. Unfortunately, I won't be able to attend this meeting. Depending on the timing, if there is a bridge set up, I may be able to dial in. >> >> Best, >> ~Jim. >> >> >> On Fri, Feb 14, 2014 at 4:28 PM, William Gropp <wgropp(a)illinois.edu> wrote: >> We should construct a list of our open items - I've set up a wiki page for this at https://svn.mpi-forum.org/trac/mpi-forum-web/wiki/mpi3-rma-agenda . Please populate the page. From there, we can answer Martin's question. >> >> Bill >> >> William Gropp >> Director, Parallel Computing Institute >> Deputy Director for Research >> Institute for Advanced Computing Applications and Technologies >> Thomas M. Siebel Chair in Computer Science >> University of Illinois Urbana-Champaign >> >> >> >> >> On Feb 14, 2014, at 3:02 PM, Rajeev Thakur wrote: >> >>> How much time does the RMA working group need at the next meeting? >>> >>> Rajeev >>> >>> Begin forwarded message: >>> >>>> From: "Schulz, Martin" <schulzm(a)llnl.gov> >>>> Subject: Re: Input needed for the Agenda for MPI Forum Meeting in March >>>> Date: February 14, 2014 2:54:07 PM CST >>>> To: Torsten Hoefler <htor(a)inf.ethz.ch>, "Wesley B. Bland" <wbland(a)mcs.anl.gov>, Aurélien Bouteiller <bouteill(a)icl.utk.edu>, Richard Graham <richardg(a)mellanox.com>, Fab Tillier <ftillier(a)microsoft.com>, Pavan Balaji <balaji(a)mcs.anl.gov>, Craig Rasmussen <rasmus(a)cas.uoregon.edu>, Quincey Koziol <koziol(a)hdfgroup.org>, "Mohamad Chaarawi" <chaarawi(a)hdfgroup.org>, Anthony Skjellum <tony(a)cis.uab.edu>, "Brian W Barrett" <bwbarre(a)sandia.gov>, William Gropp <wgropp(a)uiuc.edu>, "Rajeev Thakur" <thakur(a)mcs.anl.gov>, Kathryn Mohror <kathryn(a)llnl.gov> >>>> Cc: Purushotham Bangalore <puri(a)cis.uab.edu>, Amin Hassani <ahassani(a)cis.uab.edu> >>>> Reply-To: Martin Schulz <schulzm(a)llnl.gov> >>>> >>>> Hi all, >>>> >>>> Any more requests for the next meeting? So far I have heard only from a small subset of the WGs. Also, please remember that the deadline to send texts for readings and votes is next Monday 2pm PT. >>>> >>>> Thanks! >>>> >>>> Martin >>>> >>>> >>>> On Feb 11, 2014, at 10:30 PM, "Schulz, Martin" <schulzm(a)llnl.gov> wrote: >>>> >>>>> Dear MPI Forum WG leads, >>>>> >>>>> I am in the process of putting together the agenda for the next forum meeting in the next few weeks and will be putting up a first draft in the next few days. To help me with this, please send me the following information for your WG(s): >>>>> >>>>> - Any tickets for readings or votes that the WG wants to bring up? >>>>> - For readings: how much time would you like reserved for this? >>>>> - Any additional plenary times for WG topics? >>>>> - How much WG time would you like? >>>>> - For the WG time: any major conflicts that I should be aware of? >>>>> >>>>> Thanks! >>>>> >>>>> Martin >>>>> >>>>> >>>>> ________________________________________________________________________ >>>>> Martin Schulz, schulzm(a)llnl.gov, http://people.llnl.gov/schulzm >>>>> CASC @ Lawrence Livermore National Laboratory, Livermore, USA >>>>> >>>>> >>>>> >>>> >>>> ________________________________________________________________________ >>>> Martin Schulz, schulzm(a)llnl.gov, http://people.llnl.gov/schulzm >>>> CASC @ Lawrence Livermore National Laboratory, Livermore, USA >>>> >>>> >>>> >>> >>> _______________________________________________ >>> mpiwg-rma mailing list >>> mpiwg-rma(a)lists.mpi-forum.org >>> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma >> >> >> _______________________________________________ >> mpiwg-rma mailing list >> mpiwg-rma(a)lists.mpi-forum.org >> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma >> >> _______________________________________________ >> mpiwg-rma mailing list >> mpiwg-rma(a)lists.mpi-forum.org >> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma > > _______________________________________________ > mpiwg-rma mailing list > mpiwg-rma(a)lists.mpi-forum.org > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-rma -- Jeff Hammond jeff.science(a)gmail.com

1 0