mpiwg-large-counts

Download

[email protected]

November 2019

8 participants
22 discussions

Re: [Mpiwg-large-counts] Pythonizing slides to review for Wednesday Forum Virtual Meeting
by HOLMES Daniel 11 Nov '19

11 Nov '19

Hi Jeff, On slide 12, the “comm” parameter function call does not have a “desc” parameter, but on slide 13 the rendered output has “communicator (handle)”. The parenthetical part is auto-added, but where does the description of “communicator” come from? Is that `kind.lower()`? Is that only done for handle types? On slide 17, “Hypentization” should probably have a letter “h” in it. That’s all folks! Cheers, Dan. — Dr Daniel Holmes PhD Architect (HPC Research) d.holmes(a)epcc.ed.ac.uk<mailto:[email protected]> Phone: +44 (0) 131 651 3465 Mobile: +44 (0) 7940 524 088 Address: Room 2.09, Bayes Centre, 47 Potterrow, Central Area, Edinburgh, EH8 9BT — The University of Edinburgh is a charitable body, registered in Scotland, with registration number SC005336. — On 10 Nov 2019, at 22:26, Jeff Squyres (jsquyres) via mpiwg-large-counts <mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]>> wrote: WG -- Remember that we have the Pythonizing + Big^H^H^HExaCount Forum Virtual meeting this Wednesday (13 Nov). Here's the slides that I intend to present for the Pythonization effort: https://docs.google.com/presentation/d/1dcyTuX4My-M9lwL9g2zEqAKuFQuL3dulCfN… Can I get a few eyeballs to review / make suggestions before the Forum Virtual meeting? Our normal WG meeting is basically immediately prior to the Virtual meeting, which is a little unfortunately (i.e., little time to react to feedback). -- Jeff Squyres jsquyres(a)cisco.com _______________________________________________ mpiwg-large-counts mailing list mpiwg-large-counts(a)lists.mpi-forum.org https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts

1 0

Pythonizing slides to review for Wednesday Forum Virtual Meeting
by Jeff Squyres (jsquyres) 10 Nov '19

10 Nov '19

WG -- Remember that we have the Pythonizing + Big^H^H^HExaCount Forum Virtual meeting this Wednesday (13 Nov). Here's the slides that I intend to present for the Pythonization effort: https://docs.google.com/presentation/d/1dcyTuX4My-M9lwL9g2zEqAKuFQuL3dulCfN… Can I get a few eyeballs to review / make suggestions before the Forum Virtual meeting? Our normal WG meeting is basically immediately prior to the Virtual meeting, which is a little unfortunately (i.e., little time to react to feedback). -- Jeff Squyres jsquyres(a)cisco.com

1 0

Re: [Mpiwg-large-counts] Pythonizing instructions
by Jeff Squyres (jsquyres) 10 Nov '19

10 Nov '19

Based on feedback from the WG, I've revised / improved these directions. Please review again and send some feedback: https://github.com/mpiwg-large-count/large-count-issues/wiki/pythonizing Thank you! On Oct 19, 2019, at 4:26 PM, Jeff Squyres (jsquyres) via mpiwg-large-counts <mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]>> wrote: As discussed in our last meeting, I've written a first take at instructions for Chapter Authors for how to write Pythonized functions. These instructions are not yet intended for a wide audience -- they are intended solely for the working group. Let's iterate on them here in the WG and get them to a good enough state before sharing them widely: https://github.com/mpiwg-large-count/large-count-issues/wiki/pythonizing Puri/Tony/Dan: please try to use these instructions to Pythonize a few bindings. The PR for the Pythonization is https://github.com/mpiwg-large-count/mpi-standard/pull/2. All even-numbered chapters are done, and a small number of odd-numbered chapters. Grep for `funcdef` in chapter *.tex files to find a chapter that hasn't been Pythonized yet (funcdef is the LaTeX macro for hard-coded LaTeX macros). Send your feedback here and/or we'll discuss on Wednesday. -- Jeff Squyres jsquyres(a)cisco.com<mailto:[email protected]> _______________________________________________ mpiwg-large-counts mailing list mpiwg-large-counts(a)lists.mpi-forum.org https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts -- Jeff Squyres jsquyres(a)cisco.com<mailto:[email protected]>

1 0

Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements
by HOLMES Daniel 05 Nov '19

05 Nov '19

Hi Rolf, Thanks. I’ve copied your response into the the issue to keep it all in one place (so we don’t have to search email to find it). Cheers, Dan. — Dr Daniel Holmes PhD Architect (HPC Research) d.holmes(a)epcc.ed.ac.uk<mailto:[email protected]> Phone: +44 (0) 131 651 3465 Mobile: +44 (0) 7940 524 088 Address: Room 2.09, Bayes Centre, 47 Potterrow, Central Area, Edinburgh, EH8 9BT — The University of Edinburgh is a charitable body, registered in Scotland, with registration number SC005336. — On 5 Nov 2019, at 17:58, Rolf Rabenseifner <rabenseifner(a)hlrs.de<mailto:[email protected]>> wrote: Sorry, I now detected that you wanted to point me also to ----- Jeff Hammond <jeff.science(a)gmail.com<mailto:[email protected]><mailto:[email protected]>> wrote: Rolf: Have you looked at https://github.com/mpiwg-large-count/large-count-issues/issues/6 ? where I found your text. Thank you for remembering me. About your choices: 1.change the name of MPI_Type_get_extext_x to MPI_Type_get_extext_l to fit in with all the other _l functions for large count. This is a bad idea because the MPI_Count variant is not (just) embiggening the MPI_Aint variant, it is providing a different role (target files, not absolute memory). Agreed, bad idea. 2.add a new MPI_Type_get_extext_l that uses MPI_Offset. This is superfluous because we already have the _x variant with MPI_Count. Agreed, bad idea, because there is no "int Count" Argument. 3.leave it well alone. This seems like the best approach. Partially agreed, because for the _x Versions in the derived datatype chapter, I would always use MPI_Count and not MPI_Offset, because one never know for which other purpose derived datatypes may be used in the future.. The concept is not restricted to Memory and I/O. I/O is only an example why we need to provide these _x Versions. Therefore I prefere: 4. leave it. It is the starting point for the other _X versions. Small diff between these two _x routines and the new ones is that for each new one, it does not have a visible Fortran _X, only the overloaded one, and each existing one must get the additional overloaded interface. As far as I understand Fortran, there will be then only one backend routine with two different interfaces, because the backend is the same _X routine for the explicit and for the overloaded MPI_Count routine. Best regards Rolf ----- Original Message ----- From: "mpiwg-large-counts" <mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]>> To: "HOLMES Daniel" <d.holmes(a)epcc.ed.ac.uk<mailto:[email protected]>> Cc: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de<mailto:[email protected]>>, "mpiwg-large-counts" <mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]>> Sent: Tuesday, November 5, 2019 6:10:25 PM Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements Hi Dan, our mailers do not want to work together. I cannot find your "lengthy comment on that issue" in this email. As you can see below, it is flattened. Originally , it was with huge indents, but without any ">". Text looked then líke d d r e s s e s In the telcon, we completely aggreed that the large count versions MPI...._l should keep all MPI_Aint and should add MPI_Aint where it was missing by being wrong (MPI_Alltoall_w and MPI_(Un)pack. We completely agreed that all the MPI_Aint discussion is done. MPI_Aint is an signed integer mis-used to also store absoulte adresses whatever there bits may mean. And we do not change this nor we introduce any new such strange type. And we agreed that there should be for the few derived datatype routines with MPI_Aint an additional set with MPI_Count (or MPI_Offset, which would be wierd) instead of MPI_Aint. These MPI_Count versions do not allow the use of absolute addresses. These MPI_Count versions are needed for the case that sizeof(MPI_Aint) is less than sizeof(MPI_Count), may de 4:8 or 8.12 or 8:16, depending on the memory size per MPI process and the filesystem size. I only proposed in my latest email, that exactly two of them already exist: MPI_Type_get_extent_x and MPI_Type_get_true_extent_x and we should keep them and take the postfix _x for this set of routines instead of throwing them away and reinvernting them again. For ... I would say, - MPI_TYPE_SIZE_X the _l Version should have MPI_Aint size because it is a byte size. - MPI_GET_ELEMENTS_X and MPI_STATUS_SET_ELEMENTS_X in my opinion, we should keep _X, and the _l version is then a duplicate of it. Best regards Rolf ----- Original Message ----- From: "HOLMES Daniel" <d.holmes(a)epcc.ed.ac.uk<mailto:[email protected]>> To: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de<mailto:[email protected]>> Cc: "mpiwg-large-counts" <mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]>> Sent: Tuesday, November 5, 2019 3:18:13 PM Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements Hi Rolf (et al), I wrote a lengthy comment on that issue to capture my current understanding of your “really wrong” assertion. Broadly, we agree - I just wanted to write down the reasoning and nuances of that outcome. Cheers, Dan. — Dr Daniel Holmes PhD Architect (HPC Research) d.holmes(a)epcc.ed.ac.uk<mailto:[email protected]><mailto:[email protected]> Phone: +44 (0) 131 651 3465 Mobile: +44 (0) 7940 524 088 Address: Room 2.09, Bayes Centre, 47 Potterrow, Central Area, Edinburgh, EH8 9BT — The University of Edinburgh is a charitable body, registered in Scotland, with registration number SC005336. — On 2 Nov 2019, at 09:13, Rolf Rabenseifner via mpiwg-large-counts <mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]><mailto:[email protected]>> wrote: After the Telcon it seems that this ticket is really wrong. Some or all of the routines may/should be kept. And it these routines arean essential part of the future large count concept. Thank you very much for pointing us to this ticket. Rolf ----- Jeff Hammond <jeff.science(a)gmail.com<mailto:[email protected]><mailto:[email protected]>> wrote: Rolf: Have you looked at https://github.com/mpiwg-large-count/large-count-issues/issues/6? Jeff On Fri, Nov 1, 2019 at 1:00 AM Rolf Rabenseifner <rabenseifner(a)hlrs.de> wrote: A small comment on the result of our telcon: - Postfix _l for int -> MPI_Count - Postfix _x for additionally MPI_Aint -> MPI_Count I.e., the additional routines in the derived datatype chapter. Two of them already exist MPI_Type_get_(true)extent_x In Fortran we will have then for the same routine two aliases: - the overload one without _x - and the explicit one with _x For both ones, the internal function name is the same, with _x. Best regards Rolf ----- Jeff Hammond <jeff.science(a)gmail.com> wrote: On Thu, Oct 31, 2019 at 7:48 AM Rolf Rabenseifner <rabenseifner(a)hlrs.de> wrote: Dear all, here my summary as input for our telcon today. In principle, it is a very simple question: with large Counts, do we - keep all MPI_Aint - or do we substitute MPI_Aint by MPI_Count? I haven't been involved as much lately but did we not use MPI_Count for count and element displacements in the large count proposal? We need to use MPI_Aint for offsets into memory because that is what this type is for. Jeff In principle, the MPI Forum answered this question already for MPI-3.0 in 2012 with a clear YES: int MPI_Type_get_extent(MPI_Datatype datatype, MPI_Aint *lb, MPI_Aint *extent) int MPI_Type_get_extent_x(MPI_Datatype datatype, MPI_Count *lb, MPI_Count *extent) About Jeff H. question: If we limit the API to not support MPI_Count means that an MPI implementation has not really such quality options when using I/O fileviews, because the API is restricted to MPI_Aint (which should be implemented based on the, e.g., 64bit memory system). About Jim's comment: Apologies, it's been a while since I looked at the I/O interfaces. If I/O only needs relative displacements that have normal integer semantics, then I don't see why MPI_Count would not work for this purpose. If you have an MPI_Aint that contains a relative displacement, it also has normal integer semantics and can be converted to an MPI_Count. Yes, but this automatically implies that the datatypes must also be able to handle MPI_Count. The only case we really need to look out for is when an integer type contains an absolute address. In those cases, the quantity in the variable cannot be treated as a normal integer and we need special routines to work with it. Yes, this happens when we extend MPI_Aint in the derived datatype routines to MPI_Count. But in principle, this is not a big Problem, as you all could see in the previous emails: - We must do for MPI_Count the same as we did for MPI_Aint, i.e., we'll have long versions of the routines MPI_Get_address, MPI_Aint_diff, MPI_Aint_add - And we must ensure that the type cast from MPI_Aint to MPI_Count works, which is a small new advice to implementors for MPI_Det_address. Therefore again my 4 questions: - Should the new large count routines be prepared for more than 10 or 20 Exabyte files where we need 64/65 or or 65/66 unsigned/signed integers for relative byte displacements or byte counts? If yes, then all MPI_Aint arguments must be substituted by MPI_Count. (In other words, do we want to be prepared for another 25 years of MPI? :-) As stated above, the MPI-Forum already decided 2012 with a YES. - Should we allow that these new routines are also used for memory description, where we typically need only the large MPI_Count "count" arguments? (or should we provide two different new routines for each routine that currently has int Count/... and MPI_Aint disp/... arguments) I expect, that nobody wants to have two different large versions of for example MPI_Type_create_struct. - Should we allow a mix of old and new routines, especially for memory-based usage, that old-style MPI_Get_address is used to retrieve an absolute address and then, e.g., new style MPI_Type_create_struct with MPI_Count blocklength and displacements is used? I expect that forbidding such a mix would be a problem for Software development. Often old-style modules must work together with new-style modules. - Do we want to require for this type cast of MPI_Aint addr into MPI_Count that it is allowed to do this cast with a normal assignment, rather than a special MPI function? I expect yes, because for must usage of MPI_Aint and MPI_Count, it is for relative displacements or byte counts, i.e. for normal integers and therefore automatic type cast between MPI_Aint and MPI_Count is a must. With yes to all four questions, the proposed solution above is the easiest way. Hope to see/hear you today in our telcon. Best regards Rolf -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de<mailto:[email protected]> . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner<http://www.hlrs.de/people/rabenseifner> . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) .

1 0

Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements
by Rolf Rabenseifner 05 Nov '19

05 Nov '19

Sorry, I now detected that you wanted to point me also to >> ----- Jeff Hammond <jeff.science(a)gmail.com<mailto:[email protected]>> >> wrote: >> Rolf: >> >> Have you looked at >> https://github.com/mpiwg-large-count/large-count-issues/issues/6 ? where I found your text. Thank you for remembering me. About your choices: > 1.change the name of MPI_Type_get_extext_x to MPI_Type_get_extext_l to fit in with all the other _l functions for large count. This is a bad idea because the MPI_Count variant is not (just) embiggening the MPI_Aint variant, it is providing a different role (target files, not absolute memory). Agreed, bad idea. > 2.add a new MPI_Type_get_extext_l that uses MPI_Offset. This is superfluous because we already have the _x variant with MPI_Count. Agreed, bad idea, because there is no "int Count" Argument. > 3.leave it well alone. This seems like the best approach. Partially agreed, because for the _x Versions in the derived datatype chapter, I would always use MPI_Count and not MPI_Offset, because one never know for which other purpose derived datatypes may be used in the future.. The concept is not restricted to Memory and I/O. I/O is only an example why we need to provide these _x Versions. Therefore I prefere: 4. leave it. It is the starting point for the other _X versions. Small diff between these two _x routines and the new ones is that for each new one, it does not have a visible Fortran _X, only the overloaded one, and each existing one must get the additional overloaded interface. As far as I understand Fortran, there will be then only one backend routine with two different interfaces, because the backend is the same _X routine for the explicit and for the overloaded MPI_Count routine. Best regards Rolf ----- Original Message ----- > From: "mpiwg-large-counts" <mpiwg-large-counts(a)lists.mpi-forum.org> > To: "HOLMES Daniel" <d.holmes(a)epcc.ed.ac.uk> > Cc: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de>, "mpiwg-large-counts" <mpiwg-large-counts(a)lists.mpi-forum.org> > Sent: Tuesday, November 5, 2019 6:10:25 PM > Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements > Hi Dan, > > our mailers do not want to work together. > I cannot find your "lengthy comment on that issue" in this email. > > As you can see below, it is flattened. > > Originally , it was with huge indents, but without any ">". > Text looked then líke > > d > d > r > e > s > s > e > s > > > In the telcon, we completely aggreed that the large count versions MPI...._l > should keep all MPI_Aint and should add MPI_Aint where it was missing > by being wrong (MPI_Alltoall_w and MPI_(Un)pack. > > We completely agreed that all the MPI_Aint discussion is done. > MPI_Aint is an signed integer mis-used to also store absoulte > adresses whatever there bits may mean. And we do not change this > nor we introduce any new such strange type. > > And we agreed that there should be for the few derived datatype routines > with MPI_Aint an additional set with MPI_Count (or MPI_Offset, which would > be wierd) instead of MPI_Aint. > These MPI_Count versions do not allow the use of absolute addresses. > These MPI_Count versions are needed for the case that sizeof(MPI_Aint) > is less than sizeof(MPI_Count), may de 4:8 or 8.12 or 8:16, > depending on the memory size per MPI process and the filesystem size. > > I only proposed in my latest email, that exactly two of them already exist: > > MPI_Type_get_extent_x and MPI_Type_get_true_extent_x > > and we should keep them and take the postfix _x for this set of routines > instead of throwing them away and reinvernting them again. > > > For ... I would say, > - MPI_TYPE_SIZE_X > the _l Version should have MPI_Aint size because it is a byte size. > - MPI_GET_ELEMENTS_X and MPI_STATUS_SET_ELEMENTS_X > in my opinion, we should keep _X, and the _l version > is then a duplicate of it. > > Best regards > Rolf > > ----- Original Message ----- >> From: "HOLMES Daniel" <d.holmes(a)epcc.ed.ac.uk> >> To: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de> >> Cc: "mpiwg-large-counts" <mpiwg-large-counts(a)lists.mpi-forum.org> >> Sent: Tuesday, November 5, 2019 3:18:13 PM >> Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, >> sizes, and byte and nonbyte displacements > >> Hi Rolf (et al), >> >> I wrote a lengthy comment on that issue to capture my current understanding of >> your “really wrong” assertion. >> >> Broadly, we agree - I just wanted to write down the reasoning and nuances of >> that outcome. >> >> Cheers, >> Dan. >> — >> Dr Daniel Holmes PhD >> Architect (HPC Research) >> d.holmes(a)epcc.ed.ac.uk<mailto:[email protected]> >> Phone: +44 (0) 131 651 3465 >> Mobile: +44 (0) 7940 524 088 >> Address: Room 2.09, Bayes Centre, 47 Potterrow, Central Area, Edinburgh, EH8 9BT >> — >> The University of Edinburgh is a charitable body, registered in Scotland, with >> registration number SC005336. >> — >> >> On 2 Nov 2019, at 09:13, Rolf Rabenseifner via mpiwg-large-counts >> <mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]>> >> wrote: >> >> After the Telcon it seems that this ticket is really wrong. >> Some or all of the routines may/should be kept. >> And it these routines arean essential part of the future large count concept. >> >> Thank you very much for pointing us to this ticket. >> Rolf >> >> ----- Jeff Hammond <jeff.science(a)gmail.com<mailto:[email protected]>> >> wrote: >> Rolf: >> >> Have you looked at >> https://github.com/mpiwg-large-count/large-count-issues/issues/6? >> >> Jeff >> >> On Fri, Nov 1, 2019 at 1:00 AM Rolf Rabenseifner <rabenseifner(a)hlrs.de> >> wrote: >> >> A small comment on the result of our telcon: >> - Postfix _l for int -> MPI_Count >> - Postfix _x for additionally >> MPI_Aint -> MPI_Count >> I.e., the additional routines in the derived datatype chapter. >> >> Two of them already exist >> MPI_Type_get_(true)extent_x >> >> In Fortran we will have then for the >> same routine two aliases: >> >> - the overload one without _x >> - and the explicit one with _x >> >> For both ones, the internal function name is the same, with _x. >> >> Best regards >> Rolf >> >> >> ----- Jeff Hammond <jeff.science(a)gmail.com> wrote: >> On Thu, Oct 31, 2019 at 7:48 AM Rolf Rabenseifner <rabenseifner(a)hlrs.de> >> wrote: >> >> Dear all, >> >> here my summary as input for our telcon today. >> >> In principle, it is a very simple question: >> >> with large Counts, do we >> - keep all MPI_Aint >> - or do we substitute MPI_Aint by MPI_Count? >> >> >> I haven't been involved as much lately but did we not use MPI_Count for >> count and element displacements in the large count proposal? We need to >> use MPI_Aint for offsets into memory because that is what this type is >> for. >> >> Jeff >> >> >> >> In principle, the MPI Forum answered this question already >> for MPI-3.0 in 2012 with a clear YES: >> >> int MPI_Type_get_extent(MPI_Datatype datatype, >> MPI_Aint *lb, MPI_Aint *extent) >> int MPI_Type_get_extent_x(MPI_Datatype datatype, >> MPI_Count *lb, MPI_Count *extent) >> >> About Jeff H. question: >> If we limit the API to not support MPI_Count >> means that an MPI implementation has not really such quality options >> when using I/O fileviews, because the API is restricted to >> MPI_Aint (which should be implemented based on the, e.g., >> 64bit memory system). >> >> About Jim's comment: >> >> Apologies, it's been a while since I looked at the I/O interfaces. >> If >> I/O >> only needs relative displacements that have normal integer >> semantics, >> then >> I don't see why MPI_Count would not work for this purpose. If you >> have >> an >> MPI_Aint that contains a relative displacement, it also has normal >> integer >> semantics and can be converted to an MPI_Count. >> >> Yes, but this automatically implies that the datatypes must also >> be able to handle MPI_Count. >> >> The only case we really >> need to look out for is when an integer type contains an absolute >> address. >> In those cases, the quantity in the variable cannot be treated as a >> normal >> integer and we need special routines to work with it. >> >> Yes, this happens when we extend MPI_Aint in the derived datatype >> routines >> to MPI_Count. >> >> But in principle, this is not a big Problem, as you all could see in >> the previous emails: >> >> - We must do for MPI_Count the same as we did for MPI_Aint, >> i.e., we'll have long versions of the routines >> MPI_Get_address, MPI_Aint_diff, MPI_Aint_add >> >> - And we must ensure that the type cast from MPI_Aint to >> MPI_Count works, which is a small new advice to implementors >> for MPI_Det_address. >> >> Therefore again my 4 questions: >> >> - Should the new large count routines be prepared for >> more than 10 or 20 Exabyte files where we need 64/65 or >> or 65/66 unsigned/signed integers for relative byte >> displacements or byte counts? >> If yes, then all MPI_Aint arguments must be substituted by MPI_Count. >> >> (In other words, do we want to be prepared for another 25 years of >> MPI? >> :-) >> >> As stated above, the MPI-Forum already decided 2012 with a YES. >> >> - Should we allow that these new routines are also used for memory >> description, >> where we typically need only the large MPI_Count "count" arguments? >> (or should we provide two different new routines for each routine >> that >> currently has int Count/... and MPI_Aint disp/... arguments) >> >> I expect, that nobody wants to have two different large versions of >> for example MPI_Type_create_struct. >> >> - Should we allow a mix of old and new routines, especially for >> memory-based >> usage, that old-style MPI_Get_address is used to retrieve an absolute >> address and then, e.g., new style MPI_Type_create_struct with >> MPI_Count blocklength and displacements is used? >> >> I expect that forbidding such a mix would be a problem for Software >> development. >> Often old-style modules must work together with new-style modules. >> >> - Do we want to require for this type cast of MPI_Aint addr into >> MPI_Count >> that it is allowed to do this cast with a normal assignment, rather >> than >> a special MPI function? >> >> I expect yes, because for must usage of MPI_Aint and MPI_Count, >> it is for relative displacements or byte counts, i.e. for normal >> integers and therefore automatic type cast between MPI_Aint >> and MPI_Count is a must. >> >> With yes to all four questions, the proposed solution above is >> the easiest way. >> >> Hope to see/hear you today in our telcon. >> >> Best regards >> Rolf -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) .

1 0

Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements
by Rolf Rabenseifner 05 Nov '19

05 Nov '19

Hi Dan, our mailers do not want to work together. I cannot find your "lengthy comment on that issue" in this email. As you can see below, it is flattened. Originally , it was with huge indents, but without any ">". Text looked then líke d d r e s s e s In the telcon, we completely aggreed that the large count versions MPI...._l should keep all MPI_Aint and should add MPI_Aint where it was missing by being wrong (MPI_Alltoall_w and MPI_(Un)pack. We completely agreed that all the MPI_Aint discussion is done. MPI_Aint is an signed integer mis-used to also store absoulte adresses whatever there bits may mean. And we do not change this nor we introduce any new such strange type. And we agreed that there should be for the few derived datatype routines with MPI_Aint an additional set with MPI_Count (or MPI_Offset, which would be wierd) instead of MPI_Aint. These MPI_Count versions do not allow the use of absolute addresses. These MPI_Count versions are needed for the case that sizeof(MPI_Aint) is less than sizeof(MPI_Count), may de 4:8 or 8.12 or 8:16, depending on the memory size per MPI process and the filesystem size. I only proposed in my latest email, that exactly two of them already exist: MPI_Type_get_extent_x and MPI_Type_get_true_extent_x and we should keep them and take the postfix _x for this set of routines instead of throwing them away and reinvernting them again. For ... I would say, - MPI_TYPE_SIZE_X the _l Version should have MPI_Aint size because it is a byte size. - MPI_GET_ELEMENTS_X and MPI_STATUS_SET_ELEMENTS_X in my opinion, we should keep _X, and the _l version is then a duplicate of it. Best regards Rolf ----- Original Message ----- > From: "HOLMES Daniel" <d.holmes(a)epcc.ed.ac.uk> > To: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de> > Cc: "mpiwg-large-counts" <mpiwg-large-counts(a)lists.mpi-forum.org> > Sent: Tuesday, November 5, 2019 3:18:13 PM > Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements > Hi Rolf (et al), > > I wrote a lengthy comment on that issue to capture my current understanding of > your “really wrong” assertion. > > Broadly, we agree - I just wanted to write down the reasoning and nuances of > that outcome. > > Cheers, > Dan. > — > Dr Daniel Holmes PhD > Architect (HPC Research) > d.holmes(a)epcc.ed.ac.uk<mailto:[email protected]> > Phone: +44 (0) 131 651 3465 > Mobile: +44 (0) 7940 524 088 > Address: Room 2.09, Bayes Centre, 47 Potterrow, Central Area, Edinburgh, EH8 9BT > — > The University of Edinburgh is a charitable body, registered in Scotland, with > registration number SC005336. > — > > On 2 Nov 2019, at 09:13, Rolf Rabenseifner via mpiwg-large-counts > <mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]>> > wrote: > > After the Telcon it seems that this ticket is really wrong. > Some or all of the routines may/should be kept. > And it these routines arean essential part of the future large count concept. > > Thank you very much for pointing us to this ticket. > Rolf > > ----- Jeff Hammond <jeff.science(a)gmail.com<mailto:[email protected]>> > wrote: > Rolf: > > Have you looked at > https://github.com/mpiwg-large-count/large-count-issues/issues/6? > > Jeff > > On Fri, Nov 1, 2019 at 1:00 AM Rolf Rabenseifner <rabenseifner(a)hlrs.de> > wrote: > > A small comment on the result of our telcon: > - Postfix _l for int -> MPI_Count > - Postfix _x for additionally > MPI_Aint -> MPI_Count > I.e., the additional routines in the derived datatype chapter. > > Two of them already exist > MPI_Type_get_(true)extent_x > > In Fortran we will have then for the > same routine two aliases: > > - the overload one without _x > - and the explicit one with _x > > For both ones, the internal function name is the same, with _x. > > Best regards > Rolf > > > ----- Jeff Hammond <jeff.science(a)gmail.com> wrote: > On Thu, Oct 31, 2019 at 7:48 AM Rolf Rabenseifner <rabenseifner(a)hlrs.de> > wrote: > > Dear all, > > here my summary as input for our telcon today. > > In principle, it is a very simple question: > > with large Counts, do we > - keep all MPI_Aint > - or do we substitute MPI_Aint by MPI_Count? > > > I haven't been involved as much lately but did we not use MPI_Count for > count and element displacements in the large count proposal? We need to > use MPI_Aint for offsets into memory because that is what this type is > for. > > Jeff > > > > In principle, the MPI Forum answered this question already > for MPI-3.0 in 2012 with a clear YES: > > int MPI_Type_get_extent(MPI_Datatype datatype, > MPI_Aint *lb, MPI_Aint *extent) > int MPI_Type_get_extent_x(MPI_Datatype datatype, > MPI_Count *lb, MPI_Count *extent) > > About Jeff H. question: > If we limit the API to not support MPI_Count > means that an MPI implementation has not really such quality options > when using I/O fileviews, because the API is restricted to > MPI_Aint (which should be implemented based on the, e.g., > 64bit memory system). > > About Jim's comment: > > Apologies, it's been a while since I looked at the I/O interfaces. > If > I/O > only needs relative displacements that have normal integer > semantics, > then > I don't see why MPI_Count would not work for this purpose. If you > have > an > MPI_Aint that contains a relative displacement, it also has normal > integer > semantics and can be converted to an MPI_Count. > > Yes, but this automatically implies that the datatypes must also > be able to handle MPI_Count. > > The only case we really > need to look out for is when an integer type contains an absolute > address. > In those cases, the quantity in the variable cannot be treated as a > normal > integer and we need special routines to work with it. > > Yes, this happens when we extend MPI_Aint in the derived datatype > routines > to MPI_Count. > > But in principle, this is not a big Problem, as you all could see in > the previous emails: > > - We must do for MPI_Count the same as we did for MPI_Aint, > i.e., we'll have long versions of the routines > MPI_Get_address, MPI_Aint_diff, MPI_Aint_add > > - And we must ensure that the type cast from MPI_Aint to > MPI_Count works, which is a small new advice to implementors > for MPI_Det_address. > > Therefore again my 4 questions: > > - Should the new large count routines be prepared for > more than 10 or 20 Exabyte files where we need 64/65 or > or 65/66 unsigned/signed integers for relative byte > displacements or byte counts? > If yes, then all MPI_Aint arguments must be substituted by MPI_Count. > > (In other words, do we want to be prepared for another 25 years of > MPI? > :-) > > As stated above, the MPI-Forum already decided 2012 with a YES. > > - Should we allow that these new routines are also used for memory > description, > where we typically need only the large MPI_Count "count" arguments? > (or should we provide two different new routines for each routine > that > currently has int Count/... and MPI_Aint disp/... arguments) > > I expect, that nobody wants to have two different large versions of > for example MPI_Type_create_struct. > > - Should we allow a mix of old and new routines, especially for > memory-based > usage, that old-style MPI_Get_address is used to retrieve an absolute > address and then, e.g., new style MPI_Type_create_struct with > MPI_Count blocklength and displacements is used? > > I expect that forbidding such a mix would be a problem for Software > development. > Often old-style modules must work together with new-style modules. > > - Do we want to require for this type cast of MPI_Aint addr into > MPI_Count > that it is allowed to do this cast with a normal assignment, rather > than > a special MPI function? > > I expect yes, because for must usage of MPI_Aint and MPI_Count, > it is for relative displacements or byte counts, i.e. for normal > integers and therefore automatic type cast between MPI_Aint > and MPI_Count is a must. > > With yes to all four questions, the proposed solution above is > the easiest way. > > Hope to see/hear you today in our telcon. > > Best regards > Rolf > > > ----- Original Message ----- > From: "Jeff Hammond" <jeff.science(a)gmail.com> > To: "mpiwg-large-counts" <mpiwg-large-counts(a)lists.mpi-forum.org> > Cc: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de>, "Jim Dinan" < > james.dinan(a)gmail.com> > Sent: Thursday, October 31, 2019 5:58:30 AM > Subject: Re: [Mpiwg-large-counts] Large Count - the principles for > counts, sizes, and byte and nonbyte displacements > > What if we just decided not to support IO displacements bigger than > 2^63? > What use case would that break? If the underlying filesystem uses > 128b > displacements, fine, then MPI will promote into those before using > the > system APIs. > > We already limit all sorts of things. For example, posting 17 > billion > Isends is not guaranteed to work. Maybe it does, but that's a > quality of > implementation issue. No sane person is going to have a data type > spanning > 8 exabyte increments. Not now, not in 2030, not in 2040, not ever. > > Jeff > > On Wed, Oct 30, 2019 at 9:10 AM Jim Dinan via mpiwg-large-counts < > mpiwg-large-counts(a)lists.mpi-forum.org> wrote: > > Apologies, it's been a while since I looked at the I/O interfaces. > If > I/O > only needs relative displacements that have normal integer > semantics, > then > I don't see why MPI_Count would not work for this purpose. If you > have > an > MPI_Aint that contains a relative displacement, it also has normal > integer > semantics and can be converted to an MPI_Count. The only case we > really > need to look out for is when an integer type contains an absolute > address. > In those cases, the quantity in the variable cannot be treated as a > normal > integer and we need special routines to work with it. If MPI never > treats > an MPI_Count quantity as an absolute address then MPI_Count should > always > have normal integer semantics via the MPI interfaces and doesn't > need > special treatment. Unless, of course, we want to enable MPI_Count > that > is > large enough to need special support for basic operations, but > that's a > different can of worms. > > ~Jim. > > On Wed, Oct 30, 2019 at 11:02 AM Rolf Rabenseifner < > rabenseifner(a)hlrs.de> > wrote: > > Dear Jim, > > This sounds to me like it is creating again the same problem we > have > with > MPI_Aint --- one type doing too many things. If MPI_Aint can't > accommodate > absolute addresses in the I/O interfaces, > > I/O has no absolute addresses. Only relative one, i.e., byte > displacements > and byte sizes. > But they can be huge. > > The same routines are used for message passing, for example > - MPI_TYPE_CREATE_STRUCT or > - MPI_TYPE_CREATE_RESIZED > > we should consider adding a new > type like MPI_Faint (file address int) for this quantity and > include > accessor routines to ensure manipulations of file addresses > respect > the > implementation defined meaning of the bits. > > Yes, you are right, there are two possibilities: > Substitute MPI_Aint in the large count version by > - MPI_Count or > - or by a new type MPI_Laint (for Long Aint) > > Others on this list have already expressed that they never want to > see > such a MPI_Laint > > Even in C, it is not portable > to do arithmetic on intptr_t because the integer representation > of an > address is implementation defined. We were careful in the > definition of > MPI_Aint_add and diff to describe them in terms of casting the > absolute > address arguments back to pointers before performing arithmetic. > > Yes, therefore, for this longer Version of MPI_Aint, let's name it > for the Moment XXX, we Need > MPI_XXX_diff and MPI_XXX_add, > i.e. MPI_Laint_diff and _add or MPI_Count_diff and _add, > which should be used only if the corresponding addresses > are returned from MPI_Get_address_l. > Or form MPI_Get_address, and with this we have again the > type casting problem between MPI_Aint and MPI_Count or MPI_Laint. > > Best regards > Rolf > > ----- Original Message ----- > From: "Jim Dinan" <james.dinan(a)gmail.com> > To: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de> > Cc: "mpiwg-large-counts" <mpiwg-large-counts(a)lists.mpi-forum.org > > Sent: Wednesday, October 30, 2019 3:45:01 PM > Subject: Re: [Mpiwg-large-counts] Large Count - the principles > for > counts, sizes, and byte and nonbyte displacements > > This sounds to me like it is creating again the same problem we > have > with > MPI_Aint --- one type doing too many things. If MPI_Aint can't > accommodate > absolute addresses in the I/O interfaces, we should consider > adding a > new > type like MPI_Faint (file address int) for this quantity and > include > accessor routines to ensure manipulations of file addresses > respect > the > implementation defined meaning of the bits. Even in C, it is not > portable > to do arithmetic on intptr_t because the integer representation > of an > address is implementation defined. We were careful in the > definition of > MPI_Aint_add and diff to describe them in terms of casting the > absolute > address arguments back to pointers before performing arithmetic. > > ~Jim. > > On Wed, Oct 30, 2019 at 5:18 AM Rolf Rabenseifner < > rabenseifner(a)hlrs.de > > wrote: > > Dear all and Jim, > > Jim asked: > When you assign an MPI_Aint to an MPI_Count, there are two > cases > depending > on what the bits in the MPI_Aint represent: absolute address > and > relative > displacements. The case where you assign an address to a > count > doesn't > make sense to me. Why would one do this and why should MPI > support > it? > The case where you assign a displacement to a count seems > fine, > you > would > want sign extension to happen. > > The answer is very simple: > All derived datatype routines serve describing of memory **and** > file > space. > > Therefore, the large count working group should decide: > - Should the new large count routines be prepared for more than > 10 > or > 20 > Exabyte > files where we need 64/65 or 65/66 unsigned/signed integers > for > relative > byte > displacements or byte counts? > If yes, then all MPI_Aint arguments must be substituted by > MPI_Count. > (In other words, do we want to be prepared for another 25 > years of > MPI? > :-) > - Should we allow that these new routines are also used for > memory > description, > where we typically need only the large MPI_Count "count" > arguments? > (or should we provide two different new routines for each > routine > that > currently has int Count/... and MPI_Aint disp/... arguments) > - Should we allow a mix of old and new routines, especially for > memory-based > usage, that old-style MPI_Get_address is used to retrieve an > absolute > address and then, e.g., new style MPI_Type_create_struct with > MPI_Count blocklength and displacements is used? > - Do we want to require for this type cast of MPI_Aint addr into > MPI_Count > that it is allowed to do this cast with a normal assignment, > rather > than > > a special MPI function? > > If we answer all four questions with yes (and in my opinion, we > must) > then Jim's question > "Why would one do this [assign an address to a Count] > and why should MPI support it?" > is answered with this set of reasons. > > I would say, that this is the most complex decision that the > large count working group has to decide. > A wrong decision would be hard to be fixed in the future. > > Best regards > Rolf > > ----- Original Message ----- > From: "Jim Dinan" <james.dinan(a)gmail.com> > To: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de> > Cc: "mpiwg-large-counts" < > mpiwg-large-counts(a)lists.mpi-forum.org> > Sent: Tuesday, October 29, 2019 10:28:46 PM > Subject: Re: [Mpiwg-large-counts] Large Count - the > principles for > counts, sizes, and byte and nonbyte displacements > > If you do pointer arithmetic, the compiler will ensure that > the > result is > correct. If you convert a pointer into an integer and then > do the > arithmetic, the compiler can't help you and the result is not > portable. > This is why MPI_Aint_add describes what it does in terms of > pointer > arithmetic. The confusing and frustrating thing about > MPI_Aint is > that > it's one type for two very different purposes. Allowing > direct > +/- > on > MPI_Aint values that represent addresses is not portable and > is a > mistake > that we tried to correct with MPI_Aint_add/diff (I am happy to > strengthen > should to must if needed). It's perfectly fine to do > arithmetic > on > MPI_Aint values that are displacements. > > When you assign an MPI_Aint to an MPI_Count, there are two > cases > depending > on what the bits in the MPI_Aint represent: absolute address > and > relative > displacements. The case where you assign an address to a > count > doesn't > make sense to me. Why would one do this and why should MPI > support > it? > The case where you assign a displacement to a count seems > fine, > you > would > want sign extension to happen. > > ~Jim. > > On Tue, Oct 29, 2019 at 4:52 PM Rolf Rabenseifner < > rabenseifner(a)hlrs.de> > wrote: > > Dear Jim, > > (a3) Section 4.1.5 of MPI 3.1 states "To ensure > portability, > arithmetic > on > absolute addresses should not be performed with the > intrinsic > operators > \-" > and \+". > > The major problem is, that we decided "should" and not > "maust" or > "shall", > because there is such many existing MPI-1 ... MPI-3.0 code > that > must > have > used + or - operators. > > The only objective, that is true from the beginning, that MPI > addresses > must be > retrieved with MPI_Get_address. > > And the second also Major Problem is the new assigment of an > MPI_Aint > value > into an MPI_Count variable with MPI_Count larger than > MPI_Aint. > > Therefore, I would prefere, that we keep this "should" and > design in > long > term > MPI_Get_address in a way that in principle MPI_Aint_diff and > _add > need not to do anythin else as the + or - operator. > > And this depends on the meaning of the unsigned addresses, > i.e., > what is the sequence of addresses (i.e., is it really going > from > 0 to FFFF...FFFF) and than mapping these addreses to the > mathematical > sequence > of MPI_Aint which starts at -2**(n-1) and ends at 2**(n-1)-1. > > Thats all. For the moment, as far as the web and some emails > told > us, > we are fare away from this contiguous 64-bit address space > (0 to > FFFF...FFFF). > > But we should be correctly prepared. > > Or in other words: > (a2) Should be solved by MPI_Aint_add/diff. > In my opinion no, it must be solved by MPI_Get_addr > and MPI_Aint_add/diff can stay normal + or - operators. > > I should also mention, that of course all MPI routines that > accept MPI_BOOTOM must reverse the work of MPI_Get_address > to get back the real "unsigned" virtual addresses of the OS. > > The same what we already had if an implementation has chosen > to use the address of an MPI common block as base for > MPI_BOTTOM. > Here, the MPI lib had the freedom to revert the mapping > within MPI_Get_addr or within all functions called with > MPI_BOTTOM. > > Best regards > Rolf > > > > ----- Original Message ----- > From: "Jim Dinan" <james.dinan(a)gmail.com> > To: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de> > Cc: "mpiwg-large-counts" < > mpiwg-large-counts(a)lists.mpi-forum.org> > Sent: Tuesday, October 29, 2019 3:58:18 PM > Subject: Re: [Mpiwg-large-counts] Large Count - the > principles > for > counts, sizes, and byte and nonbyte displacements > > Hi Rolf, > > (a1) seems to me like another artifact of storing an > unsigned > quantity > in a > signed variable, i.e., the quantity in an MPI_Aint can be > an > unsigned > address or a signed displacement. Since we don't have an > unsigned > type > for > addresses, the user can't portably fix this above MPI. We > will > need > to > add > functions to deal with combinations of MPI_Aint and > MPI_Counts. > This > is > essentially why we needed MPI_Aint_add/diff. Or ... the > golden > (Au is > gold) int ... MPI_Auint. > > (a2) Should be solved by MPI_Aint_add/diff. > > (a3) Section 4.1.5 of MPI 3.1 states "To ensure > portability, > arithmetic > on > absolute addresses should not be performed with the > intrinsic > operators > \-" > and \+". MPI_Aint_add was written carefully to indicate > that > the > "base" > argument is treated as an unsigned address and the "disp" > argument is > treated as a signed displacement. > > ~Jim. > > On Tue, Oct 29, 2019 at 5:19 AM Rolf Rabenseifner < > rabenseifner(a)hlrs.de> > wrote: > > Dear Jim and all, > > I'm not sure whether I'm really able to understand your > email. > > I take the MPI view: > > (1) An absolute address can stored in an MPI_Aint variable > with and only with MPI_Get_address or MPI_Aint_add. > > (2) A positive or negative number of bytes or a relative > address > which is by definition the amount of bytes between two > locations > in a MPI "sequential storage" (MPI-3.1 page 115) > can be assigned with any method to an MPI_Aint > variable > as long as the original value fits into MPI_Aint. > In both languages automatic type cast (i.e., sign > expansion) > is done. > > (3) If users misuse MPI_Aint for storing anything else > into > MPI_Aint > variable then this is out of scope of MPI. > If such values are used in a minus operation then it > is > out of the scope of MPI whether this makes sense. > If the user is sure that the new value falls into > category > (2) > then all is fine as long as the user is correct. > > I expect that your => is not a "greater or equal than". > I expect that you noticed assignments. > > intptr_t => MPI_Aint > "intptr_t: integer type capable of holding a pointer." > > uintptr_t => ??? (Anyone remember the MPI_Auint "golden > Aint" > proposal?) > "uintptr_t: unsigned integer type capable of holding a > pointer." > > may fall exactly exactly into (3) when used for pointers. > > > Especially on a 64 bit system the user may have in the > future > exactly > the problems (a), (a1), (a2) and (b) as described below. > But here, the user is responsible, to for example > implement > (a3), > whereas for MPI_Get_address, the implementors of the MPI > library > are responsible and the MPI Forum may be responsible for > giving > the correct advices. > > By the way, the golden MPI_Auint was never golden. > Such need was "resolved" by introducing MPI_Aint_diff and > MPI_Aint_add > in MPI-3.1. > > > ptrdiff_t => MPI_Aint > "std::ptrdiff_t is the signed integer type of the result > of > subtracting > two pointers." > > may perfectly fit to (2). > > All of the following falls into category (2): > > size_t (sizeof) => MPI_Count, int > "sizeof( type ) (1) > sizeof expression (2) > Both versions are constant expressions of type > std::size_t." > > size_t (offsetof) => MPI_Aint, int > "Defined in header <cstddef> > #define offsetof(type, member) /*implementation-defined*/ > The macro offsetof expands to an integral constant > expression > of type std::size_t, the value of which is the offset, in > bytes, > from the beginning of an object of specified type to ist > specified member, including padding if any." > > Note that this offsetof has nothing to do with MPI_Offset. > > On a system with less than 2*31 byte and 4-byte int, it is > guaranteed > that size_t => int works. > > On a system with less than 2*63 byte and 8-byte MPI_Aint, > it > is > guaranteed > that size_t => MPI_Aint works. > > Problem: size_t is unsigned, int and MPI_Aint are signed. > > MPI_Count should be defined in a way that on systems with > more > than > 2**63 Bytes of disc space, that MPI_Count can hold such > values, > because > int .LE. {MPI_Aint, MPI_Offset} .LE. MPI_Count > > Therefore size_t => MPI_Count should always work. > > ssize_t => Mostly for error handling. Out of scope for > MPI? > "In short, ssize_t is the same as size_t, but is a signed > type - > read ssize_t as “signed size_t”. ssize_t is able to > represent > the number -1, which is returned by several system calls > and library functions as a way to indicate error. > For example, the read and write system calls: ... > ssize_t read(int fildes, void *buf, size_t nbyte); ..." > > ssize_t fits therefore better to MPI_Aint, because both > are signed types that can hold byte counts, but > the value -1 in a MPI_Aint variable stands for a > byte displacement of -1 bytes and not for an error code > -1. > > > All use of (2) is in principle no problem. > ------------------------------------------ > > All the complex discussiuon of the last days is about (1): > > (1) An absolute address can stored in an MPI_Aint variable > with and only with MPI_Get_address or MPI_Aint_add. > > In MPI-1 to MPI-3.0 and still in MPI-3.1 (here as may be > not > portable), > we also allow > MPI_Aint variable := absolute address in MPI_Aint > variable > + or - > a number of bytes (in any integer > type). > > The result is then still in category (1). > > > For the difference of two absolute addresses, > MPI_Aint_diff can be used. The result is than MPI_Aint of > category > (2) > > In MPI-1 to MPI-3.0 and still in MPI-3.1 (here as may be > not > portable), > we also allow > MPI_Aint variable := absolute address in MPI_Aint > variable > - absolute address in MPI_Aint > variable. > > The result is then in category (2). > > > The problems we discuss the last days are about systems > that internally use unsigned addresses and the MPI library > stores > these addresses into MPI_Aint variables and > > (a) a sequential storage can have virtual addresses that > are both in the area with highest bit =0 and other > addresses > in the same sequential storage (i.e., same array or > structure) > with highest bit =1. > > or > (b) some higher bits contain segment addresses. > > (b) is not a problem as long as a sequential storage > resides > always within one Segment. > > Therefore, we only have to discuss (a). > > The two problems that we have is > (a1) that for the minus operations an integer overflow > will > happen and must be ignored. > (a2) if such addresses are expanded to larger variables, > e.g., MPI_Count with more bits in MPI_Count than in > MPI_Aint, > sign expansion will result in completely wring > results. > > And here, the most simple trick is, > (a3) that MPI_Get_address really shall > map the contiguous unsigned range from 0 to 2**64-1 to the > signed (and also contiguous) range from -2**63 to 2**63-1 > by simple subtracting 2**63. > With this simple trick in MPI_Get_address, Problems > 8a1) and (a2) are resolved. > > It looks like that (a) and therefore (a1) and (a2) > may be far in the future. > But they may be less far in the future, if a system may > map the whole applications cluster address space > into virtual memory (not cache coherent, but accessible). > > > And all this is never or only partial written into the > MPI Standard, also all is (well) known by the MPI Forum, > with the following exceptions: > - (a2) is new. > - (a1) is solved in MPI-3.1 only for MPI_Aint_diff and > MPI_Aint_add, but not for the operators - and + > if a user will switch on integer overflow detection > in the future when we will have such large systems. > - (a3) is new and in principle solves the problem also > for + and - operators. > > At lease (a1)+(a2) should be added as rationale to MPI-4.0 > and (a3) as advice to implementors within the framework > of big count, because (a2) is newly coming with big count. > > I hope this helps a bit if you took the time to read > this long email. > > Best regards > Rolf > > > > ----- Original Message ----- > From: "mpiwg-large-counts" < > mpiwg-large-counts(a)lists.mpi-forum.org > > To: "mpiwg-large-counts" < > mpiwg-large-counts(a)lists.mpi-forum.org> > Cc: "Jim Dinan" <james.dinan(a)gmail.com>, "James Dinan" > < > james.dinan(a)intel.com> > Sent: Monday, October 28, 2019 5:07:37 PM > Subject: Re: [Mpiwg-large-counts] Large Count - the > principles > for > counts, sizes, and byte and nonbyte displacements > > Still not sure I see the issue. MPI's memory-related > integers > should > map > to > types that serve the same function in C. If the base > language > is > broken > for > segmented addressing, we won't be able to fix it in a > library. > Looking > at the > mapping below, I don't see where we would have broken > it: > > intptr_t => MPI_Aint > uintptr_t => ??? (Anyone remember the MPI_Auint "golden > Aint" > proposal?) > ptrdiff_t => MPI_Aint > size_t (sizeof) => MPI_Count, int > size_t (offsetof) => MPI_Aint, int > ssize_t => Mostly for error handling. Out of scope for > MPI? > > It sounds like there are some places where we used > MPI_Aint > in > place > of > size_t > for sizes. Not great, but MPI_Aint already needs to be > at > least as > large > as > size_t, so this seems benign. > > ~Jim. > > On Fri, Oct 25, 2019 at 8:25 PM Dinan, James via > mpiwg-large-counts < > [ > mailto:[email protected] | > mpiwg-large-counts(a)lists.mpi-forum.org ] > wrote: > > > > > > Jeff, thanks so much for opening up these old wounds. > I’m > not > sure > I > have enough > context to contribute to the discussion. Where can I > read up > on the > issue with > MPI_Aint? > > > > I’m glad to hear that C signed integers will finally > have a > well-defined > representation. > > > > ~Jim. > > > > > From: Jeff Hammond < [ mailto:[email protected] | > jeff.science(a)gmail.com ] > > Date: Thursday, October 24, 2019 at 7:03 PM > To: "Jeff Squyres (jsquyres)" < [ mailto: > jsquyres(a)cisco.com >| > jsquyres(a)cisco.com > ] > > Cc: MPI BigCount Working Group < [ mailto: > mpiwg-large-counts(a)lists.mpi-forum.org >| mpiwg-large-counts(a)lists.mpi-forum.org ] >, "Dinan, > James" > < [ > mailto:[email protected] | james.dinan(a)intel.com ] > > Subject: Re: [Mpiwg-large-counts] Large Count - the > principles > for > counts, > sizes, and byte and nonbyte displacements > > > > > > Jim (cc) suffered the most in MPI 3.0 days because of > AINT_DIFF and > AINT_SUM, so > maybe he wants to create this ticket. > > > > > > Jeff > > > > > > On Thu, Oct 24, 2019 at 2:41 PM Jeff Squyres (jsquyres) > < [ > mailto:[email protected] | jsquyres(a)cisco.com ] > > wrote: > > > > > > Not opposed to ditching segmented addressing at all. > We'd > need > a > ticket > for this > ASAP, though. > > > > > > This whole conversation is predicated on: > > > > > > - MPI supposedly supports segmented addressing > > > - MPI_Aint is not sufficient for modern segmented > addressing > (i.e., > representing > an address that may not be in main RAM and is not > mapped in > to > the > current > process' linear address space) > > > > > > If we no longer care about segmented addressing, that > makes > a > whole > bunch of > BigCount stuff a LOT easier. E.g., MPI_Aint can > basically > be a > non-segment-supporting address integer. AINT_DIFF and > AINT_SUM > can > go > away, > too. > > > > > > > > > > > > > > On Oct 24, 2019, at 5:35 PM, Jeff Hammond via > mpiwg-large-counts < > [ > mailto:[email protected] | > mpiwg-large-counts(a)lists.mpi-forum.org ] > wrote: > > > > > > Rolf: > > > > Before anybody spends any time analyzing how we handle > segmented > addressing, I > want you to provide an example of a platform where this > is > relevant. > What > system can you boot today that needs this and what MPI > libraries > have > expressed > an interest in supporting it? > > > > > > For anyone who didn't hear, ISO C and C++ have finally > committed to > twos-complement integers ( [ > > > http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0907r1.html >| > > > http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0907r1.html > ] > , [ > > http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2218.htm | > > http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2218.htm > ] ) > because > modern > programmers should not be limited by hardware designs > from > the > 1960s. > We > should > similarly not waste our time on obsolete features like > segmentation. > > > > > > Jeff > > > > > > On Thu, Oct 24, 2019 at 10:13 AM Rolf Rabenseifner via > mpiwg-large-counts < [ > mailto:[email protected] | > mpiwg-large-counts(a)lists.mpi-forum.org ] > wrote: > > > > > I think that changes the conversation entirely, right? > > Not the first part, the state-of-current-MPI. > > It may change something for the future, or a new > interface > may > be > needed. > > Please, can you describe how MPI_Get_address can work > with > the > different variables from different memory segments. > > Or whether a completely new function or a set of > functions > is > needed. > > If we can still express variables from all memory > segments > as > input to MPI_Get_address, there may be still a way to > flatten > the result of some internal address-iquiry into a > flattened > signed integer with the same behavior as MPI_Aint today. > > If this is impossible, then new way of thinking and > solution > may be needed. > > I really want to see examples for all current stuff as > you > mentioned in your last email. > > Best regards > Rolf > > ----- Original Message ----- > From: "Jeff Squyres" < [ mailto:[email protected] | > jsquyres(a)cisco.com > ] > > To: "Rolf Rabenseifner" < [ mailto: > rabenseifner(a)hlrs.de | > rabenseifner(a)hlrs.de ] > > Cc: "mpiwg-large-counts" < [ mailto: > mpiwg-large-counts(a)lists.mpi-forum.org | > mpiwg-large-counts(a)lists.mpi-forum.org ] > > Sent: Thursday, October 24, 2019 5:27:31 PM > Subject: Re: [Mpiwg-large-counts] Large Count - the > principles for > counts, > sizes, and byte and nonbyte displacements > > On Oct 24, 2019, at 11:15 AM, Rolf Rabenseifner > < [ mailto:[email protected] | rabenseifner(a)hlrs.de > ] > <mailto: > [ > mailto:[email protected] | rabenseifner(a)hlrs.de ] > > wrote: > > For me, it looked like that there was some > misunderstanding > of the concept that absolute and relative addresses > and number of bytes that can be stored in MPI_Aint. > > ...with the caveat that MPI_Aint -- as it is right now > -- > does not > support > modern segmented memory systems (i.e., where you need > more > than a > small > number > of bits to indicate the segment where the memory > lives). > > I think that changes the conversation entirely, right? > > -- > Jeff Squyres > [ mailto:[email protected] | jsquyres(a)cisco.com ] > <mailto: [ > mailto:[email protected] | jsquyres(a)cisco.com ] > > > -- > Dr. Rolf Rabenseifner . . . . . . . . . .. email [ > mailto: > rabenseifner(a)hlrs.de | > rabenseifner(a)hlrs.de ] . > High Performance Computing Center (HLRS) . phone > ++49(0)711/685-65530 > . > University of Stuttgart . . . . . . . . .. fax > ++49(0)711 / > 685-65832 > . > Head of Dpmt Parallel Computing . . . [ > http://www.hlrs.de/people/rabenseifner | > www.hlrs.de/people/rabenseifner ] . > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . > (Office: > Room > 1.307) > . > _______________________________________________ > mpiwg-large-counts mailing list > [ mailto:[email protected] | > mpiwg-large-counts(a)lists.mpi-forum.org ] > [ > https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts >| > > https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts ] > > > > > > > > > -- > > > Jeff Hammond > [ mailto:[email protected] | > jeff.science(a)gmail.com ] > [ http://jeffhammond.github.io/ | > http://jeffhammond.github.io/ ] > > > _______________________________________________ > mpiwg-large-counts mailing list > [ mailto:[email protected] | > mpiwg-large-counts(a)lists.mpi-forum.org ] > [ > https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts >| > > https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts ] > > > > > > > -- > Jeff Squyres > [ mailto:[email protected] | jsquyres(a)cisco.com ] > > > > > > > > > > > > -- > > > Jeff Hammond > [ mailto:[email protected] | > jeff.science(a)gmail.com ] > [ http://jeffhammond.github.io/ | > http://jeffhammond.github.io/ ] > _______________________________________________ > mpiwg-large-counts mailing list > [ mailto:[email protected] | > mpiwg-large-counts(a)lists.mpi-forum.org ] > [ > https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts >| > > https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts ] > > _______________________________________________ > mpiwg-large-counts mailing list > mpiwg-large-counts(a)lists.mpi-forum.org > > https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts > > -- > Dr. Rolf Rabenseifner . . . . . . . . . .. email > rabenseifner(a)hlrs.de . > High Performance Computing Center (HLRS) . phone > ++49(0)711/685-65530 . > University of Stuttgart . . . . . . . . .. fax ++49(0)711 > / > 685-65832 . > Head of Dpmt Parallel Computing . . . > www.hlrs.de/people/rabenseifner . > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: > Room > 1.307) . > > -- > Dr. Rolf Rabenseifner . . . . . . . . . .. email > rabenseifner(a)hlrs.de . > High Performance Computing Center (HLRS) . phone > ++49(0)711/685-65530 . > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / > 685-65832 . > Head of Dpmt Parallel Computing . . . > www.hlrs.de/people/rabenseifner . > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: > Room > 1.307) . > > -- > Dr. Rolf Rabenseifner . . . . . . . . . .. email > rabenseifner(a)hlrs.de > . > High Performance Computing Center (HLRS) . phone > ++49(0)711/685-65530 . > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / > 685-65832 . > Head of Dpmt Parallel Computing . . . > www.hlrs.de/people/rabenseifner > . > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room > 1.307) . > > -- > Dr. Rolf Rabenseifner . . . . . . . . . .. email > rabenseifner(a)hlrs.de > . > High Performance Computing Center (HLRS) . phone > ++49(0)711/685-65530 . > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / > 685-65832 . > Head of Dpmt Parallel Computing . . . > www.hlrs.de/people/rabenseifner > . > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room > 1.307) . > > _______________________________________________ > mpiwg-large-counts mailing list > mpiwg-large-counts(a)lists.mpi-forum.org > https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts > > > > -- > Jeff Hammond > jeff.science(a)gmail.com > http://jeffhammond.github.io/ > > -- > Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de > . > High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . > Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner > . > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . > > > > > -- > Jeff Hammond > jeff.science(a)gmail.com > http://jeffhammond.github.io/ > > -- > Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de . > High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . > Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner . > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . > > > > -- > Jeff Hammond > jeff.science(a)gmail.com > http://jeffhammond.github.io/ > > -- > Dr. Rolf Rabenseifner . . . . . . . . . .. email > rabenseifner(a)hlrs.de<mailto:[email protected]> . > High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . > Head of Dpmt Parallel Computing . . . > www.hlrs.de/people/rabenseifner<http://www.hlrs.de/people/rabenseifner> . > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . > _______________________________________________ > mpiwg-large-counts mailing list > mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> > https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) .

1 0

Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements
by Jeff Squyres (jsquyres) 05 Nov '19

05 Nov '19

Agreed -- that ticket was made as an action item from *before* the recent webex / before the current understanding. On Nov 5, 2019, at 9:18 AM, HOLMES Daniel via mpiwg-large-counts <mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]>> wrote: Hi Rolf (et al), I wrote a lengthy comment on that issue to capture my current understanding of your “really wrong” assertion. Broadly, we agree - I just wanted to write down the reasoning and nuances of that outcome. Cheers, Dan. — Dr Daniel Holmes PhD Architect (HPC Research) d.holmes(a)epcc.ed.ac.uk<mailto:[email protected]> Phone: +44 (0) 131 651 3465 Mobile: +44 (0) 7940 524 088 Address: Room 2.09, Bayes Centre, 47 Potterrow, Central Area, Edinburgh, EH8 9BT — The University of Edinburgh is a charitable body, registered in Scotland, with registration number SC005336. — On 2 Nov 2019, at 09:13, Rolf Rabenseifner via mpiwg-large-counts <mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]>> wrote: After the Telcon it seems that this ticket is really wrong. Some or all of the routines may/should be kept. And it these routines arean essential part of the future large count concept. Thank you very much for pointing us to this ticket. Rolf ----- Jeff Hammond <jeff.science(a)gmail.com<mailto:[email protected]>> wrote: Rolf: Have you looked at https://github.com/mpiwg-large-count/large-count-issues/issues/6? Jeff On Fri, Nov 1, 2019 at 1:00 AM Rolf Rabenseifner <rabenseifner(a)hlrs.de<mailto:[email protected]>> wrote: A small comment on the result of our telcon: - Postfix _l for int -> MPI_Count - Postfix _x for additionally MPI_Aint -> MPI_Count I.e., the additional routines in the derived datatype chapter. Two of them already exist MPI_Type_get_(true)extent_x In Fortran we will have then for the same routine two aliases: - the overload one without _x - and the explicit one with _x For both ones, the internal function name is the same, with _x. Best regards Rolf ----- Jeff Hammond <jeff.science(a)gmail.com<mailto:[email protected]>> wrote: On Thu, Oct 31, 2019 at 7:48 AM Rolf Rabenseifner <rabenseifner(a)hlrs.de<mailto:[email protected]>> wrote: Dear all, here my summary as input for our telcon today. In principle, it is a very simple question: with large Counts, do we - keep all MPI_Aint - or do we substitute MPI_Aint by MPI_Count? I haven't been involved as much lately but did we not use MPI_Count for count and element displacements in the large count proposal? We need to use MPI_Aint for offsets into memory because that is what this type is for. Jeff In principle, the MPI Forum answered this question already for MPI-3.0 in 2012 with a clear YES: int MPI_Type_get_extent(MPI_Datatype datatype, MPI_Aint *lb, MPI_Aint *extent) int MPI_Type_get_extent_x(MPI_Datatype datatype, MPI_Count *lb, MPI_Count *extent) About Jeff H. question: If we limit the API to not support MPI_Count means that an MPI implementation has not really such quality options when using I/O fileviews, because the API is restricted to MPI_Aint (which should be implemented based on the, e.g., 64bit memory system). About Jim's comment: Apologies, it's been a while since I looked at the I/O interfaces. If I/O only needs relative displacements that have normal integer semantics, then I don't see why MPI_Count would not work for this purpose. If you have an MPI_Aint that contains a relative displacement, it also has normal integer semantics and can be converted to an MPI_Count. Yes, but this automatically implies that the datatypes must also be able to handle MPI_Count. The only case we really need to look out for is when an integer type contains an absolute address. In those cases, the quantity in the variable cannot be treated as a normal integer and we need special routines to work with it. Yes, this happens when we extend MPI_Aint in the derived datatype routines to MPI_Count. But in principle, this is not a big Problem, as you all could see in the previous emails: - We must do for MPI_Count the same as we did for MPI_Aint, i.e., we'll have long versions of the routines MPI_Get_address, MPI_Aint_diff, MPI_Aint_add - And we must ensure that the type cast from MPI_Aint to MPI_Count works, which is a small new advice to implementors for MPI_Det_address. Therefore again my 4 questions: - Should the new large count routines be prepared for more than 10 or 20 Exabyte files where we need 64/65 or or 65/66 unsigned/signed integers for relative byte displacements or byte counts? If yes, then all MPI_Aint arguments must be substituted by MPI_Count. (In other words, do we want to be prepared for another 25 years of MPI? :-) As stated above, the MPI-Forum already decided 2012 with a YES. - Should we allow that these new routines are also used for memory description, where we typically need only the large MPI_Count "count" arguments? (or should we provide two different new routines for each routine that currently has int Count/... and MPI_Aint disp/... arguments) I expect, that nobody wants to have two different large versions of for example MPI_Type_create_struct. - Should we allow a mix of old and new routines, especially for memory-based usage, that old-style MPI_Get_address is used to retrieve an absolute address and then, e.g., new style MPI_Type_create_struct with MPI_Count blocklength and displacements is used? I expect that forbidding such a mix would be a problem for Software development. Often old-style modules must work together with new-style modules. - Do we want to require for this type cast of MPI_Aint addr into MPI_Count that it is allowed to do this cast with a normal assignment, rather than a special MPI function? I expect yes, because for must usage of MPI_Aint and MPI_Count, it is for relative displacements or byte counts, i.e. for normal integers and therefore automatic type cast between MPI_Aint and MPI_Count is a must. With yes to all four questions, the proposed solution above is the easiest way. Hope to see/hear you today in our telcon. Best regards Rolf ----- Original Message ----- From: "Jeff Hammond" <jeff.science(a)gmail.com<mailto:[email protected]>> To: "mpiwg-large-counts" <mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]>> Cc: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de<mailto:[email protected]>>, "Jim Dinan" < james.dinan(a)gmail.com<mailto:[email protected]>> Sent: Thursday, October 31, 2019 5:58:30 AM Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements What if we just decided not to support IO displacements bigger than 2^63? What use case would that break? If the underlying filesystem uses 128b displacements, fine, then MPI will promote into those before using the system APIs. We already limit all sorts of things. For example, posting 17 billion Isends is not guaranteed to work. Maybe it does, but that's a quality of implementation issue. No sane person is going to have a data type spanning 8 exabyte increments. Not now, not in 2030, not in 2040, not ever. Jeff On Wed, Oct 30, 2019 at 9:10 AM Jim Dinan via mpiwg-large-counts < mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]>> wrote: Apologies, it's been a while since I looked at the I/O interfaces. If I/O only needs relative displacements that have normal integer semantics, then I don't see why MPI_Count would not work for this purpose. If you have an MPI_Aint that contains a relative displacement, it also has normal integer semantics and can be converted to an MPI_Count. The only case we really need to look out for is when an integer type contains an absolute address. In those cases, the quantity in the variable cannot be treated as a normal integer and we need special routines to work with it. If MPI never treats an MPI_Count quantity as an absolute address then MPI_Count should always have normal integer semantics via the MPI interfaces and doesn't need special treatment. Unless, of course, we want to enable MPI_Count that is large enough to need special support for basic operations, but that's a different can of worms. ~Jim. On Wed, Oct 30, 2019 at 11:02 AM Rolf Rabenseifner < rabenseifner(a)hlrs.de<mailto:[email protected]>> wrote: Dear Jim, This sounds to me like it is creating again the same problem we have with MPI_Aint --- one type doing too many things. If MPI_Aint can't accommodate absolute addresses in the I/O interfaces, I/O has no absolute addresses. Only relative one, i.e., byte displacements and byte sizes. But they can be huge. The same routines are used for message passing, for example - MPI_TYPE_CREATE_STRUCT or - MPI_TYPE_CREATE_RESIZED we should consider adding a new type like MPI_Faint (file address int) for this quantity and include accessor routines to ensure manipulations of file addresses respect the implementation defined meaning of the bits. Yes, you are right, there are two possibilities: Substitute MPI_Aint in the large count version by - MPI_Count or - or by a new type MPI_Laint (for Long Aint) Others on this list have already expressed that they never want to see such a MPI_Laint Even in C, it is not portable to do arithmetic on intptr_t because the integer representation of an address is implementation defined. We were careful in the definition of MPI_Aint_add and diff to describe them in terms of casting the absolute address arguments back to pointers before performing arithmetic. Yes, therefore, for this longer Version of MPI_Aint, let's name it for the Moment XXX, we Need MPI_XXX_diff and MPI_XXX_add, i.e. MPI_Laint_diff and _add or MPI_Count_diff and _add, which should be used only if the corresponding addresses are returned from MPI_Get_address_l. Or form MPI_Get_address, and with this we have again the type casting problem between MPI_Aint and MPI_Count or MPI_Laint. Best regards Rolf ----- Original Message ----- From: "Jim Dinan" <james.dinan(a)gmail.com<mailto:[email protected]>> To: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de<mailto:[email protected]>> Cc: "mpiwg-large-counts" <mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> Sent: Wednesday, October 30, 2019 3:45:01 PM Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements This sounds to me like it is creating again the same problem we have with MPI_Aint --- one type doing too many things. If MPI_Aint can't accommodate absolute addresses in the I/O interfaces, we should consider adding a new type like MPI_Faint (file address int) for this quantity and include accessor routines to ensure manipulations of file addresses respect the implementation defined meaning of the bits. Even in C, it is not portable to do arithmetic on intptr_t because the integer representation of an address is implementation defined. We were careful in the definition of MPI_Aint_add and diff to describe them in terms of casting the absolute address arguments back to pointers before performing arithmetic. ~Jim. On Wed, Oct 30, 2019 at 5:18 AM Rolf Rabenseifner < rabenseifner(a)hlrs.de<mailto:[email protected]> wrote: Dear all and Jim, Jim asked: When you assign an MPI_Aint to an MPI_Count, there are two cases depending on what the bits in the MPI_Aint represent: absolute address and relative displacements. The case where you assign an address to a count doesn't make sense to me. Why would one do this and why should MPI support it? The case where you assign a displacement to a count seems fine, you would want sign extension to happen. The answer is very simple: All derived datatype routines serve describing of memory **and** file space. Therefore, the large count working group should decide: - Should the new large count routines be prepared for more than 10 or 20 Exabyte files where we need 64/65 or 65/66 unsigned/signed integers for relative byte displacements or byte counts? If yes, then all MPI_Aint arguments must be substituted by MPI_Count. (In other words, do we want to be prepared for another 25 years of MPI? :-) - Should we allow that these new routines are also used for memory description, where we typically need only the large MPI_Count "count" arguments? (or should we provide two different new routines for each routine that currently has int Count/... and MPI_Aint disp/... arguments) - Should we allow a mix of old and new routines, especially for memory-based usage, that old-style MPI_Get_address is used to retrieve an absolute address and then, e.g., new style MPI_Type_create_struct with MPI_Count blocklength and displacements is used? - Do we want to require for this type cast of MPI_Aint addr into MPI_Count that it is allowed to do this cast with a normal assignment, rather than a special MPI function? If we answer all four questions with yes (and in my opinion, we must) then Jim's question "Why would one do this [assign an address to a Count] and why should MPI support it?" is answered with this set of reasons. I would say, that this is the most complex decision that the large count working group has to decide. A wrong decision would be hard to be fixed in the future. Best regards Rolf ----- Original Message ----- From: "Jim Dinan" <james.dinan(a)gmail.com<mailto:[email protected]>> To: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de<mailto:[email protected]>> Cc: "mpiwg-large-counts" < mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]>> Sent: Tuesday, October 29, 2019 10:28:46 PM Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements If you do pointer arithmetic, the compiler will ensure that the result is correct. If you convert a pointer into an integer and then do the arithmetic, the compiler can't help you and the result is not portable. This is why MPI_Aint_add describes what it does in terms of pointer arithmetic. The confusing and frustrating thing about MPI_Aint is that it's one type for two very different purposes. Allowing direct +/- on MPI_Aint values that represent addresses is not portable and is a mistake that we tried to correct with MPI_Aint_add/diff (I am happy to strengthen should to must if needed). It's perfectly fine to do arithmetic on MPI_Aint values that are displacements. When you assign an MPI_Aint to an MPI_Count, there are two cases depending on what the bits in the MPI_Aint represent: absolute address and relative displacements. The case where you assign an address to a count doesn't make sense to me. Why would one do this and why should MPI support it? The case where you assign a displacement to a count seems fine, you would want sign extension to happen. ~Jim. On Tue, Oct 29, 2019 at 4:52 PM Rolf Rabenseifner < rabenseifner(a)hlrs.de<mailto:[email protected]>> wrote: Dear Jim, (a3) Section 4.1.5 of MPI 3.1 states "To ensure portability, arithmetic on absolute addresses should not be performed with the intrinsic operators \-" and \+". The major problem is, that we decided "should" and not "maust" or "shall", because there is such many existing MPI-1 ... MPI-3.0 code that must have used + or - operators. The only objective, that is true from the beginning, that MPI addresses must be retrieved with MPI_Get_address. And the second also Major Problem is the new assigment of an MPI_Aint value into an MPI_Count variable with MPI_Count larger than MPI_Aint. Therefore, I would prefere, that we keep this "should" and design in long term MPI_Get_address in a way that in principle MPI_Aint_diff and _add need not to do anythin else as the + or - operator. And this depends on the meaning of the unsigned addresses, i.e., what is the sequence of addresses (i.e., is it really going from 0 to FFFF...FFFF) and than mapping these addreses to the mathematical sequence of MPI_Aint which starts at -2**(n-1) and ends at 2**(n-1)-1. Thats all. For the moment, as far as the web and some emails told us, we are fare away from this contiguous 64-bit address space (0 to FFFF...FFFF). But we should be correctly prepared. Or in other words: (a2) Should be solved by MPI_Aint_add/diff. In my opinion no, it must be solved by MPI_Get_addr and MPI_Aint_add/diff can stay normal + or - operators. I should also mention, that of course all MPI routines that accept MPI_BOOTOM must reverse the work of MPI_Get_address to get back the real "unsigned" virtual addresses of the OS. The same what we already had if an implementation has chosen to use the address of an MPI common block as base for MPI_BOTTOM. Here, the MPI lib had the freedom to revert the mapping within MPI_Get_addr or within all functions called with MPI_BOTTOM. Best regards Rolf ----- Original Message ----- From: "Jim Dinan" <james.dinan(a)gmail.com<mailto:[email protected]>> To: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de<mailto:[email protected]>> Cc: "mpiwg-large-counts" < mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]>> Sent: Tuesday, October 29, 2019 3:58:18 PM Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements Hi Rolf, (a1) seems to me like another artifact of storing an unsigned quantity in a signed variable, i.e., the quantity in an MPI_Aint can be an unsigned address or a signed displacement. Since we don't have an unsigned type for addresses, the user can't portably fix this above MPI. We will need to add functions to deal with combinations of MPI_Aint and MPI_Counts. This is essentially why we needed MPI_Aint_add/diff. Or ... the golden (Au is gold) int ... MPI_Auint. (a2) Should be solved by MPI_Aint_add/diff. (a3) Section 4.1.5 of MPI 3.1 states "To ensure portability, arithmetic on absolute addresses should not be performed with the intrinsic operators \-" and \+". MPI_Aint_add was written carefully to indicate that the "base" argument is treated as an unsigned address and the "disp" argument is treated as a signed displacement. ~Jim. On Tue, Oct 29, 2019 at 5:19 AM Rolf Rabenseifner < rabenseifner(a)hlrs.de<mailto:[email protected]>> wrote: Dear Jim and all, I'm not sure whether I'm really able to understand your email. I take the MPI view: (1) An absolute address can stored in an MPI_Aint variable with and only with MPI_Get_address or MPI_Aint_add. (2) A positive or negative number of bytes or a relative address which is by definition the amount of bytes between two locations in a MPI "sequential storage" (MPI-3.1 page 115) can be assigned with any method to an MPI_Aint variable as long as the original value fits into MPI_Aint. In both languages automatic type cast (i.e., sign expansion) is done. (3) If users misuse MPI_Aint for storing anything else into MPI_Aint variable then this is out of scope of MPI. If such values are used in a minus operation then it is out of the scope of MPI whether this makes sense. If the user is sure that the new value falls into category (2) then all is fine as long as the user is correct. I expect that your => is not a "greater or equal than". I expect that you noticed assignments. intptr_t => MPI_Aint "intptr_t: integer type capable of holding a pointer." uintptr_t => ??? (Anyone remember the MPI_Auint "golden Aint" proposal?) "uintptr_t: unsigned integer type capable of holding a pointer." may fall exactly exactly into (3) when used for pointers. Especially on a 64 bit system the user may have in the future exactly the problems (a), (a1), (a2) and (b) as described below. But here, the user is responsible, to for example implement (a3), whereas for MPI_Get_address, the implementors of the MPI library are responsible and the MPI Forum may be responsible for giving the correct advices. By the way, the golden MPI_Auint was never golden. Such need was "resolved" by introducing MPI_Aint_diff and MPI_Aint_add in MPI-3.1. ptrdiff_t => MPI_Aint "std::ptrdiff_t is the signed integer type of the result of subtracting two pointers." may perfectly fit to (2). All of the following falls into category (2): size_t (sizeof) => MPI_Count, int "sizeof( type ) (1) sizeof expression (2) Both versions are constant expressions of type std::size_t." size_t (offsetof) => MPI_Aint, int "Defined in header <cstddef> #define offsetof(type, member) /*implementation-defined*/ The macro offsetof expands to an integral constant expression of type std::size_t, the value of which is the offset, in bytes, from the beginning of an object of specified type to ist specified member, including padding if any." Note that this offsetof has nothing to do with MPI_Offset. On a system with less than 2*31 byte and 4-byte int, it is guaranteed that size_t => int works. On a system with less than 2*63 byte and 8-byte MPI_Aint, it is guaranteed that size_t => MPI_Aint works. Problem: size_t is unsigned, int and MPI_Aint are signed. MPI_Count should be defined in a way that on systems with more than 2**63 Bytes of disc space, that MPI_Count can hold such values, because int .LE. {MPI_Aint, MPI_Offset} .LE. MPI_Count Therefore size_t => MPI_Count should always work. ssize_t => Mostly for error handling. Out of scope for MPI? "In short, ssize_t is the same as size_t, but is a signed type - read ssize_t as “signed size_t”. ssize_t is able to represent the number -1, which is returned by several system calls and library functions as a way to indicate error. For example, the read and write system calls: ... ssize_t read(int fildes, void *buf, size_t nbyte); ..." ssize_t fits therefore better to MPI_Aint, because both are signed types that can hold byte counts, but the value -1 in a MPI_Aint variable stands for a byte displacement of -1 bytes and not for an error code -1. All use of (2) is in principle no problem. ------------------------------------------ All the complex discussiuon of the last days is about (1): (1) An absolute address can stored in an MPI_Aint variable with and only with MPI_Get_address or MPI_Aint_add. In MPI-1 to MPI-3.0 and still in MPI-3.1 (here as may be not portable), we also allow MPI_Aint variable := absolute address in MPI_Aint variable + or - a number of bytes (in any integer type). The result is then still in category (1). For the difference of two absolute addresses, MPI_Aint_diff can be used. The result is than MPI_Aint of category (2) In MPI-1 to MPI-3.0 and still in MPI-3.1 (here as may be not portable), we also allow MPI_Aint variable := absolute address in MPI_Aint variable - absolute address in MPI_Aint variable. The result is then in category (2). The problems we discuss the last days are about systems that internally use unsigned addresses and the MPI library stores these addresses into MPI_Aint variables and (a) a sequential storage can have virtual addresses that are both in the area with highest bit =0 and other addresses in the same sequential storage (i.e., same array or structure) with highest bit =1. or (b) some higher bits contain segment addresses. (b) is not a problem as long as a sequential storage resides always within one Segment. Therefore, we only have to discuss (a). The two problems that we have is (a1) that for the minus operations an integer overflow will happen and must be ignored. (a2) if such addresses are expanded to larger variables, e.g., MPI_Count with more bits in MPI_Count than in MPI_Aint, sign expansion will result in completely wring results. And here, the most simple trick is, (a3) that MPI_Get_address really shall map the contiguous unsigned range from 0 to 2**64-1 to the signed (and also contiguous) range from -2**63 to 2**63-1 by simple subtracting 2**63. With this simple trick in MPI_Get_address, Problems 8a1) and (a2) are resolved. It looks like that (a) and therefore (a1) and (a2) may be far in the future. But they may be less far in the future, if a system may map the whole applications cluster address space into virtual memory (not cache coherent, but accessible). And all this is never or only partial written into the MPI Standard, also all is (well) known by the MPI Forum, with the following exceptions: - (a2) is new. - (a1) is solved in MPI-3.1 only for MPI_Aint_diff and MPI_Aint_add, but not for the operators - and + if a user will switch on integer overflow detection in the future when we will have such large systems. - (a3) is new and in principle solves the problem also for + and - operators. At lease (a1)+(a2) should be added as rationale to MPI-4.0 and (a3) as advice to implementors within the framework of big count, because (a2) is newly coming with big count. I hope this helps a bit if you took the time to read this long email. Best regards Rolf ----- Original Message ----- From: "mpiwg-large-counts" < mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> To: "mpiwg-large-counts" < mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]>> Cc: "Jim Dinan" <james.dinan(a)gmail.com<mailto:[email protected]>>, "James Dinan" < james.dinan(a)intel.com<mailto:[email protected]>> Sent: Monday, October 28, 2019 5:07:37 PM Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements Still not sure I see the issue. MPI's memory-related integers should map to types that serve the same function in C. If the base language is broken for segmented addressing, we won't be able to fix it in a library. Looking at the mapping below, I don't see where we would have broken it: intptr_t => MPI_Aint uintptr_t => ??? (Anyone remember the MPI_Auint "golden Aint" proposal?) ptrdiff_t => MPI_Aint size_t (sizeof) => MPI_Count, int size_t (offsetof) => MPI_Aint, int ssize_t => Mostly for error handling. Out of scope for MPI? It sounds like there are some places where we used MPI_Aint in place of size_t for sizes. Not great, but MPI_Aint already needs to be at least as large as size_t, so this seems benign. ~Jim. On Fri, Oct 25, 2019 at 8:25 PM Dinan, James via mpiwg-large-counts < [ mailto:[email protected] | mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> ] > wrote: Jeff, thanks so much for opening up these old wounds. I’m not sure I have enough context to contribute to the discussion. Where can I read up on the issue with MPI_Aint? I’m glad to hear that C signed integers will finally have a well-defined representation. ~Jim. From: Jeff Hammond < [ mailto:[email protected] | jeff.science(a)gmail.com<mailto:[email protected]> ] Date: Thursday, October 24, 2019 at 7:03 PM To: "Jeff Squyres (jsquyres)" < [ mailto: jsquyres(a)cisco.com<mailto:[email protected]> | jsquyres(a)cisco.com<mailto:[email protected]> ] > Cc: MPI BigCount Working Group < [ mailto: mpiwg-large-counts(a)lists.mpi-forum.org | mpiwg-large-counts(a)lists.mpi-forum.org ] >, "Dinan, James" < [ mailto:[email protected] | james.dinan(a)intel.com<mailto:[email protected]> ] Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements Jim (cc) suffered the most in MPI 3.0 days because of AINT_DIFF and AINT_SUM, so maybe he wants to create this ticket. Jeff On Thu, Oct 24, 2019 at 2:41 PM Jeff Squyres (jsquyres) < [ mailto:[email protected] | jsquyres(a)cisco.com<mailto:[email protected]> ] > wrote: Not opposed to ditching segmented addressing at all. We'd need a ticket for this ASAP, though. This whole conversation is predicated on: - MPI supposedly supports segmented addressing - MPI_Aint is not sufficient for modern segmented addressing (i.e., representing an address that may not be in main RAM and is not mapped in to the current process' linear address space) If we no longer care about segmented addressing, that makes a whole bunch of BigCount stuff a LOT easier. E.g., MPI_Aint can basically be a non-segment-supporting address integer. AINT_DIFF and AINT_SUM can go away, too. On Oct 24, 2019, at 5:35 PM, Jeff Hammond via mpiwg-large-counts < [ mailto:[email protected] | mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> ] > wrote: Rolf: Before anybody spends any time analyzing how we handle segmented addressing, I want you to provide an example of a platform where this is relevant. What system can you boot today that needs this and what MPI libraries have expressed an interest in supporting it? For anyone who didn't hear, ISO C and C++ have finally committed to twos-complement integers ( [ http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0907r1.html | http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0907r1.html ] , [ http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2218.htm | http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2218.htm ] ) because modern programmers should not be limited by hardware designs from the 1960s. We should similarly not waste our time on obsolete features like segmentation. Jeff On Thu, Oct 24, 2019 at 10:13 AM Rolf Rabenseifner via mpiwg-large-counts < [ mailto:[email protected] | mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> ] > wrote: I think that changes the conversation entirely, right? Not the first part, the state-of-current-MPI. It may change something for the future, or a new interface may be needed. Please, can you describe how MPI_Get_address can work with the different variables from different memory segments. Or whether a completely new function or a set of functions is needed. If we can still express variables from all memory segments as input to MPI_Get_address, there may be still a way to flatten the result of some internal address-iquiry into a flattened signed integer with the same behavior as MPI_Aint today. If this is impossible, then new way of thinking and solution may be needed. I really want to see examples for all current stuff as you mentioned in your last email. Best regards Rolf ----- Original Message ----- From: "Jeff Squyres" < [ mailto:[email protected] | jsquyres(a)cisco.com<mailto:[email protected]> ] > To: "Rolf Rabenseifner" < [ mailto: rabenseifner(a)hlrs.de<mailto:[email protected]> | rabenseifner(a)hlrs.de<mailto:[email protected]> ] Cc: "mpiwg-large-counts" < [ mailto: mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> | mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> ] > Sent: Thursday, October 24, 2019 5:27:31 PM Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements On Oct 24, 2019, at 11:15 AM, Rolf Rabenseifner < [ mailto:[email protected] | rabenseifner(a)hlrs.de<mailto:[email protected]> ] <mailto: [ mailto:[email protected] | rabenseifner(a)hlrs.de<mailto:[email protected]> ] wrote: For me, it looked like that there was some misunderstanding of the concept that absolute and relative addresses and number of bytes that can be stored in MPI_Aint. ...with the caveat that MPI_Aint -- as it is right now -- does not support modern segmented memory systems (i.e., where you need more than a small number of bits to indicate the segment where the memory lives). I think that changes the conversation entirely, right? -- Jeff Squyres [ mailto:[email protected] | jsquyres(a)cisco.com<mailto:[email protected]> ] <mailto: [ mailto:[email protected] | jsquyres(a)cisco.com<mailto:[email protected]> ] > -- Dr. Rolf Rabenseifner . . . . . . . . . .. email [ mailto: rabenseifner(a)hlrs.de<mailto:[email protected]> | rabenseifner(a)hlrs.de<mailto:[email protected]> ] . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . [ http://www.hlrs.de/people/rabenseifner | www.hlrs.de/people/rabenseifner<http://www.hlrs.de/people/rabenseifner> ] . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . _______________________________________________ mpiwg-large-counts mailing list [ mailto:[email protected] | mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> ] [ https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts | https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts ] -- Jeff Hammond [ mailto:[email protected] | jeff.science(a)gmail.com<mailto:[email protected]> ] [ http://jeffhammond.github.io/ | http://jeffhammond.github.io/ ] _______________________________________________ mpiwg-large-counts mailing list [ mailto:[email protected] | mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> ] [ https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts | https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts ] -- Jeff Squyres [ mailto:[email protected] | jsquyres(a)cisco.com<mailto:[email protected]> ] -- Jeff Hammond [ mailto:[email protected] | jeff.science(a)gmail.com<mailto:[email protected]> ] [ http://jeffhammond.github.io/ | http://jeffhammond.github.io/ ] _______________________________________________ mpiwg-large-counts mailing list [ mailto:[email protected] | mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> ] [ https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts | https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts ] _______________________________________________ mpiwg-large-counts mailing list mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de<mailto:[email protected]> . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner<http://www.hlrs.de/people/rabenseifner> . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de<mailto:[email protected]> . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner<http://www.hlrs.de/people/rabenseifner> . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de<mailto:[email protected]> . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner<http://www.hlrs.de/people/rabenseifner> . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de<mailto:[email protected]> . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner<http://www.hlrs.de/people/rabenseifner> . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . _______________________________________________ mpiwg-large-counts mailing list mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts -- Jeff Hammond jeff.science(a)gmail.com<mailto:[email protected]> http://jeffhammond.github.io/ -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de<mailto:[email protected]> . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner<http://www.hlrs.de/people/rabenseifner> . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . -- Jeff Hammond jeff.science(a)gmail.com<mailto:[email protected]> http://jeffhammond.github.io/ -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de<mailto:[email protected]> . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner<http://www.hlrs.de/people/rabenseifner> . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . -- Jeff Hammond jeff.science(a)gmail.com<mailto:[email protected]> http://jeffhammond.github.io/ -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de<mailto:[email protected]> . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner<http://www.hlrs.de/people/rabenseifner> . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . _______________________________________________ mpiwg-large-counts mailing list mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts _______________________________________________ mpiwg-large-counts mailing list mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts -- Jeff Squyres jsquyres(a)cisco.com<mailto:[email protected]>

1 0

Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements
by HOLMES Daniel 05 Nov '19

05 Nov '19

Hi Rolf (et al), I wrote a lengthy comment on that issue to capture my current understanding of your “really wrong” assertion. Broadly, we agree - I just wanted to write down the reasoning and nuances of that outcome. Cheers, Dan. — Dr Daniel Holmes PhD Architect (HPC Research) d.holmes(a)epcc.ed.ac.uk<mailto:[email protected]> Phone: +44 (0) 131 651 3465 Mobile: +44 (0) 7940 524 088 Address: Room 2.09, Bayes Centre, 47 Potterrow, Central Area, Edinburgh, EH8 9BT — The University of Edinburgh is a charitable body, registered in Scotland, with registration number SC005336. — On 2 Nov 2019, at 09:13, Rolf Rabenseifner via mpiwg-large-counts <mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]>> wrote: After the Telcon it seems that this ticket is really wrong. Some or all of the routines may/should be kept. And it these routines arean essential part of the future large count concept. Thank you very much for pointing us to this ticket. Rolf ----- Jeff Hammond <jeff.science(a)gmail.com<mailto:[email protected]>> wrote: Rolf: Have you looked at https://github.com/mpiwg-large-count/large-count-issues/issues/6? Jeff On Fri, Nov 1, 2019 at 1:00 AM Rolf Rabenseifner <rabenseifner(a)hlrs.de> wrote: A small comment on the result of our telcon: - Postfix _l for int -> MPI_Count - Postfix _x for additionally MPI_Aint -> MPI_Count I.e., the additional routines in the derived datatype chapter. Two of them already exist MPI_Type_get_(true)extent_x In Fortran we will have then for the same routine two aliases: - the overload one without _x - and the explicit one with _x For both ones, the internal function name is the same, with _x. Best regards Rolf ----- Jeff Hammond <jeff.science(a)gmail.com> wrote: On Thu, Oct 31, 2019 at 7:48 AM Rolf Rabenseifner <rabenseifner(a)hlrs.de> wrote: Dear all, here my summary as input for our telcon today. In principle, it is a very simple question: with large Counts, do we - keep all MPI_Aint - or do we substitute MPI_Aint by MPI_Count? I haven't been involved as much lately but did we not use MPI_Count for count and element displacements in the large count proposal? We need to use MPI_Aint for offsets into memory because that is what this type is for. Jeff In principle, the MPI Forum answered this question already for MPI-3.0 in 2012 with a clear YES: int MPI_Type_get_extent(MPI_Datatype datatype, MPI_Aint *lb, MPI_Aint *extent) int MPI_Type_get_extent_x(MPI_Datatype datatype, MPI_Count *lb, MPI_Count *extent) About Jeff H. question: If we limit the API to not support MPI_Count means that an MPI implementation has not really such quality options when using I/O fileviews, because the API is restricted to MPI_Aint (which should be implemented based on the, e.g., 64bit memory system). About Jim's comment: Apologies, it's been a while since I looked at the I/O interfaces. If I/O only needs relative displacements that have normal integer semantics, then I don't see why MPI_Count would not work for this purpose. If you have an MPI_Aint that contains a relative displacement, it also has normal integer semantics and can be converted to an MPI_Count. Yes, but this automatically implies that the datatypes must also be able to handle MPI_Count. The only case we really need to look out for is when an integer type contains an absolute address. In those cases, the quantity in the variable cannot be treated as a normal integer and we need special routines to work with it. Yes, this happens when we extend MPI_Aint in the derived datatype routines to MPI_Count. But in principle, this is not a big Problem, as you all could see in the previous emails: - We must do for MPI_Count the same as we did for MPI_Aint, i.e., we'll have long versions of the routines MPI_Get_address, MPI_Aint_diff, MPI_Aint_add - And we must ensure that the type cast from MPI_Aint to MPI_Count works, which is a small new advice to implementors for MPI_Det_address. Therefore again my 4 questions: - Should the new large count routines be prepared for more than 10 or 20 Exabyte files where we need 64/65 or or 65/66 unsigned/signed integers for relative byte displacements or byte counts? If yes, then all MPI_Aint arguments must be substituted by MPI_Count. (In other words, do we want to be prepared for another 25 years of MPI? :-) As stated above, the MPI-Forum already decided 2012 with a YES. - Should we allow that these new routines are also used for memory description, where we typically need only the large MPI_Count "count" arguments? (or should we provide two different new routines for each routine that currently has int Count/... and MPI_Aint disp/... arguments) I expect, that nobody wants to have two different large versions of for example MPI_Type_create_struct. - Should we allow a mix of old and new routines, especially for memory-based usage, that old-style MPI_Get_address is used to retrieve an absolute address and then, e.g., new style MPI_Type_create_struct with MPI_Count blocklength and displacements is used? I expect that forbidding such a mix would be a problem for Software development. Often old-style modules must work together with new-style modules. - Do we want to require for this type cast of MPI_Aint addr into MPI_Count that it is allowed to do this cast with a normal assignment, rather than a special MPI function? I expect yes, because for must usage of MPI_Aint and MPI_Count, it is for relative displacements or byte counts, i.e. for normal integers and therefore automatic type cast between MPI_Aint and MPI_Count is a must. With yes to all four questions, the proposed solution above is the easiest way. Hope to see/hear you today in our telcon. Best regards Rolf ----- Original Message ----- From: "Jeff Hammond" <jeff.science(a)gmail.com> To: "mpiwg-large-counts" <mpiwg-large-counts(a)lists.mpi-forum.org> Cc: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de>, "Jim Dinan" < james.dinan(a)gmail.com> Sent: Thursday, October 31, 2019 5:58:30 AM Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements What if we just decided not to support IO displacements bigger than 2^63? What use case would that break? If the underlying filesystem uses 128b displacements, fine, then MPI will promote into those before using the system APIs. We already limit all sorts of things. For example, posting 17 billion Isends is not guaranteed to work. Maybe it does, but that's a quality of implementation issue. No sane person is going to have a data type spanning 8 exabyte increments. Not now, not in 2030, not in 2040, not ever. Jeff On Wed, Oct 30, 2019 at 9:10 AM Jim Dinan via mpiwg-large-counts < mpiwg-large-counts(a)lists.mpi-forum.org> wrote: Apologies, it's been a while since I looked at the I/O interfaces. If I/O only needs relative displacements that have normal integer semantics, then I don't see why MPI_Count would not work for this purpose. If you have an MPI_Aint that contains a relative displacement, it also has normal integer semantics and can be converted to an MPI_Count. The only case we really need to look out for is when an integer type contains an absolute address. In those cases, the quantity in the variable cannot be treated as a normal integer and we need special routines to work with it. If MPI never treats an MPI_Count quantity as an absolute address then MPI_Count should always have normal integer semantics via the MPI interfaces and doesn't need special treatment. Unless, of course, we want to enable MPI_Count that is large enough to need special support for basic operations, but that's a different can of worms. ~Jim. On Wed, Oct 30, 2019 at 11:02 AM Rolf Rabenseifner < rabenseifner(a)hlrs.de> wrote: Dear Jim, This sounds to me like it is creating again the same problem we have with MPI_Aint --- one type doing too many things. If MPI_Aint can't accommodate absolute addresses in the I/O interfaces, I/O has no absolute addresses. Only relative one, i.e., byte displacements and byte sizes. But they can be huge. The same routines are used for message passing, for example - MPI_TYPE_CREATE_STRUCT or - MPI_TYPE_CREATE_RESIZED we should consider adding a new type like MPI_Faint (file address int) for this quantity and include accessor routines to ensure manipulations of file addresses respect the implementation defined meaning of the bits. Yes, you are right, there are two possibilities: Substitute MPI_Aint in the large count version by - MPI_Count or - or by a new type MPI_Laint (for Long Aint) Others on this list have already expressed that they never want to see such a MPI_Laint Even in C, it is not portable to do arithmetic on intptr_t because the integer representation of an address is implementation defined. We were careful in the definition of MPI_Aint_add and diff to describe them in terms of casting the absolute address arguments back to pointers before performing arithmetic. Yes, therefore, for this longer Version of MPI_Aint, let's name it for the Moment XXX, we Need MPI_XXX_diff and MPI_XXX_add, i.e. MPI_Laint_diff and _add or MPI_Count_diff and _add, which should be used only if the corresponding addresses are returned from MPI_Get_address_l. Or form MPI_Get_address, and with this we have again the type casting problem between MPI_Aint and MPI_Count or MPI_Laint. Best regards Rolf ----- Original Message ----- From: "Jim Dinan" <james.dinan(a)gmail.com> To: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de> Cc: "mpiwg-large-counts" <mpiwg-large-counts(a)lists.mpi-forum.org Sent: Wednesday, October 30, 2019 3:45:01 PM Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements This sounds to me like it is creating again the same problem we have with MPI_Aint --- one type doing too many things. If MPI_Aint can't accommodate absolute addresses in the I/O interfaces, we should consider adding a new type like MPI_Faint (file address int) for this quantity and include accessor routines to ensure manipulations of file addresses respect the implementation defined meaning of the bits. Even in C, it is not portable to do arithmetic on intptr_t because the integer representation of an address is implementation defined. We were careful in the definition of MPI_Aint_add and diff to describe them in terms of casting the absolute address arguments back to pointers before performing arithmetic. ~Jim. On Wed, Oct 30, 2019 at 5:18 AM Rolf Rabenseifner < rabenseifner(a)hlrs.de wrote: Dear all and Jim, Jim asked: When you assign an MPI_Aint to an MPI_Count, there are two cases depending on what the bits in the MPI_Aint represent: absolute address and relative displacements. The case where you assign an address to a count doesn't make sense to me. Why would one do this and why should MPI support it? The case where you assign a displacement to a count seems fine, you would want sign extension to happen. The answer is very simple: All derived datatype routines serve describing of memory **and** file space. Therefore, the large count working group should decide: - Should the new large count routines be prepared for more than 10 or 20 Exabyte files where we need 64/65 or 65/66 unsigned/signed integers for relative byte displacements or byte counts? If yes, then all MPI_Aint arguments must be substituted by MPI_Count. (In other words, do we want to be prepared for another 25 years of MPI? :-) - Should we allow that these new routines are also used for memory description, where we typically need only the large MPI_Count "count" arguments? (or should we provide two different new routines for each routine that currently has int Count/... and MPI_Aint disp/... arguments) - Should we allow a mix of old and new routines, especially for memory-based usage, that old-style MPI_Get_address is used to retrieve an absolute address and then, e.g., new style MPI_Type_create_struct with MPI_Count blocklength and displacements is used? - Do we want to require for this type cast of MPI_Aint addr into MPI_Count that it is allowed to do this cast with a normal assignment, rather than a special MPI function? If we answer all four questions with yes (and in my opinion, we must) then Jim's question "Why would one do this [assign an address to a Count] and why should MPI support it?" is answered with this set of reasons. I would say, that this is the most complex decision that the large count working group has to decide. A wrong decision would be hard to be fixed in the future. Best regards Rolf ----- Original Message ----- From: "Jim Dinan" <james.dinan(a)gmail.com> To: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de> Cc: "mpiwg-large-counts" < mpiwg-large-counts(a)lists.mpi-forum.org> Sent: Tuesday, October 29, 2019 10:28:46 PM Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements If you do pointer arithmetic, the compiler will ensure that the result is correct. If you convert a pointer into an integer and then do the arithmetic, the compiler can't help you and the result is not portable. This is why MPI_Aint_add describes what it does in terms of pointer arithmetic. The confusing and frustrating thing about MPI_Aint is that it's one type for two very different purposes. Allowing direct +/- on MPI_Aint values that represent addresses is not portable and is a mistake that we tried to correct with MPI_Aint_add/diff (I am happy to strengthen should to must if needed). It's perfectly fine to do arithmetic on MPI_Aint values that are displacements. When you assign an MPI_Aint to an MPI_Count, there are two cases depending on what the bits in the MPI_Aint represent: absolute address and relative displacements. The case where you assign an address to a count doesn't make sense to me. Why would one do this and why should MPI support it? The case where you assign a displacement to a count seems fine, you would want sign extension to happen. ~Jim. On Tue, Oct 29, 2019 at 4:52 PM Rolf Rabenseifner < rabenseifner(a)hlrs.de> wrote: Dear Jim, (a3) Section 4.1.5 of MPI 3.1 states "To ensure portability, arithmetic on absolute addresses should not be performed with the intrinsic operators \-" and \+". The major problem is, that we decided "should" and not "maust" or "shall", because there is such many existing MPI-1 ... MPI-3.0 code that must have used + or - operators. The only objective, that is true from the beginning, that MPI addresses must be retrieved with MPI_Get_address. And the second also Major Problem is the new assigment of an MPI_Aint value into an MPI_Count variable with MPI_Count larger than MPI_Aint. Therefore, I would prefere, that we keep this "should" and design in long term MPI_Get_address in a way that in principle MPI_Aint_diff and _add need not to do anythin else as the + or - operator. And this depends on the meaning of the unsigned addresses, i.e., what is the sequence of addresses (i.e., is it really going from 0 to FFFF...FFFF) and than mapping these addreses to the mathematical sequence of MPI_Aint which starts at -2**(n-1) and ends at 2**(n-1)-1. Thats all. For the moment, as far as the web and some emails told us, we are fare away from this contiguous 64-bit address space (0 to FFFF...FFFF). But we should be correctly prepared. Or in other words: (a2) Should be solved by MPI_Aint_add/diff. In my opinion no, it must be solved by MPI_Get_addr and MPI_Aint_add/diff can stay normal + or - operators. I should also mention, that of course all MPI routines that accept MPI_BOOTOM must reverse the work of MPI_Get_address to get back the real "unsigned" virtual addresses of the OS. The same what we already had if an implementation has chosen to use the address of an MPI common block as base for MPI_BOTTOM. Here, the MPI lib had the freedom to revert the mapping within MPI_Get_addr or within all functions called with MPI_BOTTOM. Best regards Rolf ----- Original Message ----- From: "Jim Dinan" <james.dinan(a)gmail.com> To: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de> Cc: "mpiwg-large-counts" < mpiwg-large-counts(a)lists.mpi-forum.org> Sent: Tuesday, October 29, 2019 3:58:18 PM Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements Hi Rolf, (a1) seems to me like another artifact of storing an unsigned quantity in a signed variable, i.e., the quantity in an MPI_Aint can be an unsigned address or a signed displacement. Since we don't have an unsigned type for addresses, the user can't portably fix this above MPI. We will need to add functions to deal with combinations of MPI_Aint and MPI_Counts. This is essentially why we needed MPI_Aint_add/diff. Or ... the golden (Au is gold) int ... MPI_Auint. (a2) Should be solved by MPI_Aint_add/diff. (a3) Section 4.1.5 of MPI 3.1 states "To ensure portability, arithmetic on absolute addresses should not be performed with the intrinsic operators \-" and \+". MPI_Aint_add was written carefully to indicate that the "base" argument is treated as an unsigned address and the "disp" argument is treated as a signed displacement. ~Jim. On Tue, Oct 29, 2019 at 5:19 AM Rolf Rabenseifner < rabenseifner(a)hlrs.de> wrote: Dear Jim and all, I'm not sure whether I'm really able to understand your email. I take the MPI view: (1) An absolute address can stored in an MPI_Aint variable with and only with MPI_Get_address or MPI_Aint_add. (2) A positive or negative number of bytes or a relative address which is by definition the amount of bytes between two locations in a MPI "sequential storage" (MPI-3.1 page 115) can be assigned with any method to an MPI_Aint variable as long as the original value fits into MPI_Aint. In both languages automatic type cast (i.e., sign expansion) is done. (3) If users misuse MPI_Aint for storing anything else into MPI_Aint variable then this is out of scope of MPI. If such values are used in a minus operation then it is out of the scope of MPI whether this makes sense. If the user is sure that the new value falls into category (2) then all is fine as long as the user is correct. I expect that your => is not a "greater or equal than". I expect that you noticed assignments. intptr_t => MPI_Aint "intptr_t: integer type capable of holding a pointer." uintptr_t => ??? (Anyone remember the MPI_Auint "golden Aint" proposal?) "uintptr_t: unsigned integer type capable of holding a pointer." may fall exactly exactly into (3) when used for pointers. Especially on a 64 bit system the user may have in the future exactly the problems (a), (a1), (a2) and (b) as described below. But here, the user is responsible, to for example implement (a3), whereas for MPI_Get_address, the implementors of the MPI library are responsible and the MPI Forum may be responsible for giving the correct advices. By the way, the golden MPI_Auint was never golden. Such need was "resolved" by introducing MPI_Aint_diff and MPI_Aint_add in MPI-3.1. ptrdiff_t => MPI_Aint "std::ptrdiff_t is the signed integer type of the result of subtracting two pointers." may perfectly fit to (2). All of the following falls into category (2): size_t (sizeof) => MPI_Count, int "sizeof( type ) (1) sizeof expression (2) Both versions are constant expressions of type std::size_t." size_t (offsetof) => MPI_Aint, int "Defined in header <cstddef> #define offsetof(type, member) /*implementation-defined*/ The macro offsetof expands to an integral constant expression of type std::size_t, the value of which is the offset, in bytes, from the beginning of an object of specified type to ist specified member, including padding if any." Note that this offsetof has nothing to do with MPI_Offset. On a system with less than 2*31 byte and 4-byte int, it is guaranteed that size_t => int works. On a system with less than 2*63 byte and 8-byte MPI_Aint, it is guaranteed that size_t => MPI_Aint works. Problem: size_t is unsigned, int and MPI_Aint are signed. MPI_Count should be defined in a way that on systems with more than 2**63 Bytes of disc space, that MPI_Count can hold such values, because int .LE. {MPI_Aint, MPI_Offset} .LE. MPI_Count Therefore size_t => MPI_Count should always work. ssize_t => Mostly for error handling. Out of scope for MPI? "In short, ssize_t is the same as size_t, but is a signed type - read ssize_t as “signed size_t”. ssize_t is able to represent the number -1, which is returned by several system calls and library functions as a way to indicate error. For example, the read and write system calls: ... ssize_t read(int fildes, void *buf, size_t nbyte); ..." ssize_t fits therefore better to MPI_Aint, because both are signed types that can hold byte counts, but the value -1 in a MPI_Aint variable stands for a byte displacement of -1 bytes and not for an error code -1. All use of (2) is in principle no problem. ------------------------------------------ All the complex discussiuon of the last days is about (1): (1) An absolute address can stored in an MPI_Aint variable with and only with MPI_Get_address or MPI_Aint_add. In MPI-1 to MPI-3.0 and still in MPI-3.1 (here as may be not portable), we also allow MPI_Aint variable := absolute address in MPI_Aint variable + or - a number of bytes (in any integer type). The result is then still in category (1). For the difference of two absolute addresses, MPI_Aint_diff can be used. The result is than MPI_Aint of category (2) In MPI-1 to MPI-3.0 and still in MPI-3.1 (here as may be not portable), we also allow MPI_Aint variable := absolute address in MPI_Aint variable - absolute address in MPI_Aint variable. The result is then in category (2). The problems we discuss the last days are about systems that internally use unsigned addresses and the MPI library stores these addresses into MPI_Aint variables and (a) a sequential storage can have virtual addresses that are both in the area with highest bit =0 and other addresses in the same sequential storage (i.e., same array or structure) with highest bit =1. or (b) some higher bits contain segment addresses. (b) is not a problem as long as a sequential storage resides always within one Segment. Therefore, we only have to discuss (a). The two problems that we have is (a1) that for the minus operations an integer overflow will happen and must be ignored. (a2) if such addresses are expanded to larger variables, e.g., MPI_Count with more bits in MPI_Count than in MPI_Aint, sign expansion will result in completely wring results. And here, the most simple trick is, (a3) that MPI_Get_address really shall map the contiguous unsigned range from 0 to 2**64-1 to the signed (and also contiguous) range from -2**63 to 2**63-1 by simple subtracting 2**63. With this simple trick in MPI_Get_address, Problems 8a1) and (a2) are resolved. It looks like that (a) and therefore (a1) and (a2) may be far in the future. But they may be less far in the future, if a system may map the whole applications cluster address space into virtual memory (not cache coherent, but accessible). And all this is never or only partial written into the MPI Standard, also all is (well) known by the MPI Forum, with the following exceptions: - (a2) is new. - (a1) is solved in MPI-3.1 only for MPI_Aint_diff and MPI_Aint_add, but not for the operators - and + if a user will switch on integer overflow detection in the future when we will have such large systems. - (a3) is new and in principle solves the problem also for + and - operators. At lease (a1)+(a2) should be added as rationale to MPI-4.0 and (a3) as advice to implementors within the framework of big count, because (a2) is newly coming with big count. I hope this helps a bit if you took the time to read this long email. Best regards Rolf ----- Original Message ----- From: "mpiwg-large-counts" < mpiwg-large-counts(a)lists.mpi-forum.org To: "mpiwg-large-counts" < mpiwg-large-counts(a)lists.mpi-forum.org> Cc: "Jim Dinan" <james.dinan(a)gmail.com>, "James Dinan" < james.dinan(a)intel.com> Sent: Monday, October 28, 2019 5:07:37 PM Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements Still not sure I see the issue. MPI's memory-related integers should map to types that serve the same function in C. If the base language is broken for segmented addressing, we won't be able to fix it in a library. Looking at the mapping below, I don't see where we would have broken it: intptr_t => MPI_Aint uintptr_t => ??? (Anyone remember the MPI_Auint "golden Aint" proposal?) ptrdiff_t => MPI_Aint size_t (sizeof) => MPI_Count, int size_t (offsetof) => MPI_Aint, int ssize_t => Mostly for error handling. Out of scope for MPI? It sounds like there are some places where we used MPI_Aint in place of size_t for sizes. Not great, but MPI_Aint already needs to be at least as large as size_t, so this seems benign. ~Jim. On Fri, Oct 25, 2019 at 8:25 PM Dinan, James via mpiwg-large-counts < [ mailto:[email protected] | mpiwg-large-counts(a)lists.mpi-forum.org ] > wrote: Jeff, thanks so much for opening up these old wounds. I’m not sure I have enough context to contribute to the discussion. Where can I read up on the issue with MPI_Aint? I’m glad to hear that C signed integers will finally have a well-defined representation. ~Jim. From: Jeff Hammond < [ mailto:[email protected] | jeff.science(a)gmail.com ] Date: Thursday, October 24, 2019 at 7:03 PM To: "Jeff Squyres (jsquyres)" < [ mailto: jsquyres(a)cisco.com | jsquyres(a)cisco.com ] > Cc: MPI BigCount Working Group < [ mailto: mpiwg-large-counts(a)lists.mpi-forum.org | mpiwg-large-counts(a)lists.mpi-forum.org ] >, "Dinan, James" < [ mailto:[email protected] | james.dinan(a)intel.com ] Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements Jim (cc) suffered the most in MPI 3.0 days because of AINT_DIFF and AINT_SUM, so maybe he wants to create this ticket. Jeff On Thu, Oct 24, 2019 at 2:41 PM Jeff Squyres (jsquyres) < [ mailto:[email protected] | jsquyres(a)cisco.com ] > wrote: Not opposed to ditching segmented addressing at all. We'd need a ticket for this ASAP, though. This whole conversation is predicated on: - MPI supposedly supports segmented addressing - MPI_Aint is not sufficient for modern segmented addressing (i.e., representing an address that may not be in main RAM and is not mapped in to the current process' linear address space) If we no longer care about segmented addressing, that makes a whole bunch of BigCount stuff a LOT easier. E.g., MPI_Aint can basically be a non-segment-supporting address integer. AINT_DIFF and AINT_SUM can go away, too. On Oct 24, 2019, at 5:35 PM, Jeff Hammond via mpiwg-large-counts < [ mailto:[email protected] | mpiwg-large-counts(a)lists.mpi-forum.org ] > wrote: Rolf: Before anybody spends any time analyzing how we handle segmented addressing, I want you to provide an example of a platform where this is relevant. What system can you boot today that needs this and what MPI libraries have expressed an interest in supporting it? For anyone who didn't hear, ISO C and C++ have finally committed to twos-complement integers ( [ http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0907r1.html | http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0907r1.html ] , [ http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2218.htm | http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2218.htm ] ) because modern programmers should not be limited by hardware designs from the 1960s. We should similarly not waste our time on obsolete features like segmentation. Jeff On Thu, Oct 24, 2019 at 10:13 AM Rolf Rabenseifner via mpiwg-large-counts < [ mailto:[email protected] | mpiwg-large-counts(a)lists.mpi-forum.org ] > wrote: I think that changes the conversation entirely, right? Not the first part, the state-of-current-MPI. It may change something for the future, or a new interface may be needed. Please, can you describe how MPI_Get_address can work with the different variables from different memory segments. Or whether a completely new function or a set of functions is needed. If we can still express variables from all memory segments as input to MPI_Get_address, there may be still a way to flatten the result of some internal address-iquiry into a flattened signed integer with the same behavior as MPI_Aint today. If this is impossible, then new way of thinking and solution may be needed. I really want to see examples for all current stuff as you mentioned in your last email. Best regards Rolf ----- Original Message ----- From: "Jeff Squyres" < [ mailto:[email protected] | jsquyres(a)cisco.com ] > To: "Rolf Rabenseifner" < [ mailto: rabenseifner(a)hlrs.de | rabenseifner(a)hlrs.de ] Cc: "mpiwg-large-counts" < [ mailto: mpiwg-large-counts(a)lists.mpi-forum.org | mpiwg-large-counts(a)lists.mpi-forum.org ] > Sent: Thursday, October 24, 2019 5:27:31 PM Subject: Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements On Oct 24, 2019, at 11:15 AM, Rolf Rabenseifner < [ mailto:[email protected] | rabenseifner(a)hlrs.de ] <mailto: [ mailto:[email protected] | rabenseifner(a)hlrs.de ] wrote: For me, it looked like that there was some misunderstanding of the concept that absolute and relative addresses and number of bytes that can be stored in MPI_Aint. ...with the caveat that MPI_Aint -- as it is right now -- does not support modern segmented memory systems (i.e., where you need more than a small number of bits to indicate the segment where the memory lives). I think that changes the conversation entirely, right? -- Jeff Squyres [ mailto:[email protected] | jsquyres(a)cisco.com ] <mailto: [ mailto:[email protected] | jsquyres(a)cisco.com ] > -- Dr. Rolf Rabenseifner . . . . . . . . . .. email [ mailto: rabenseifner(a)hlrs.de | rabenseifner(a)hlrs.de ] . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . [ http://www.hlrs.de/people/rabenseifner | www.hlrs.de/people/rabenseifner ] . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . _______________________________________________ mpiwg-large-counts mailing list [ mailto:[email protected] | mpiwg-large-counts(a)lists.mpi-forum.org ] [ https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts | https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts ] -- Jeff Hammond [ mailto:[email protected] | jeff.science(a)gmail.com ] [ http://jeffhammond.github.io/ | http://jeffhammond.github.io/ ] _______________________________________________ mpiwg-large-counts mailing list [ mailto:[email protected] | mpiwg-large-counts(a)lists.mpi-forum.org ] [ https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts | https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts ] -- Jeff Squyres [ mailto:[email protected] | jsquyres(a)cisco.com ] -- Jeff Hammond [ mailto:[email protected] | jeff.science(a)gmail.com ] [ http://jeffhammond.github.io/ | http://jeffhammond.github.io/ ] _______________________________________________ mpiwg-large-counts mailing list [ mailto:[email protected] | mpiwg-large-counts(a)lists.mpi-forum.org ] [ https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts | https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts ] _______________________________________________ mpiwg-large-counts mailing list mpiwg-large-counts(a)lists.mpi-forum.org https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . _______________________________________________ mpiwg-large-counts mailing list mpiwg-large-counts(a)lists.mpi-forum.org https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts -- Jeff Hammond jeff.science(a)gmail.com http://jeffhammond.github.io/ -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . -- Jeff Hammond jeff.science(a)gmail.com http://jeffhammond.github.io/ -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . -- Jeff Hammond jeff.science(a)gmail.com http://jeffhammond.github.io/ -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de<mailto:[email protected]> . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner<http://www.hlrs.de/people/rabenseifner> . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . _______________________________________________ mpiwg-large-counts mailing list mpiwg-large-counts(a)lists.mpi-forum.org<mailto:[email protected]> https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts

1 0

Re: [Mpiwg-large-counts] Pythonizing + BigCount: virtual meeting on Nov 13?
by schulzm＠in.tum.de 02 Nov '19

02 Nov '19

Catching up - sure, that works - and BigCount has preference anyway, as we discussed. Thanks! Martin — Prof. Dr. Martin Schulz, Chair of Computer Architecture and Parallel Systems Department of Informatics, TU-Munich, Boltzmannstraße 3, D-85748 Garching Member of the Board of Directors at the Leibniz Supercomputing Centre (LRZ) Email: schulzm(a)in.tum.de > On 28. Oct 2019, at 14:45, Wesley Bland <work(a)wesbland.com> wrote: > > I don’t think anyone else has reserved it. I can put you on the schedule. > >> On Oct 26, 2019, at 9:15 AM, Jeff Squyres (jsquyres) via mpiwg-large-counts <mpiwg-large-counts(a)lists.mpi-forum.org> wrote: >> >> Martin Schulz -- >> >> Can you please confirm that the ExaCount WG can have the Nov 13 MPI Forum Virtual Meeting slot? >> >> Thanks. >> >> >>> On Oct 23, 2019, at 10:11 AM, Jeff Squyres (jsquyres) via mpiwg-large-counts <mpiwg-large-counts(a)lists.mpi-forum.org> wrote: >>> >>> Martin S -- >>> >>> The LargeCount / BigCount / WhopperCount / GinormousCount / UseYouFavoriteWordCount WG would like to reserve the 2-hour virtual meeting on Wed Nov 13. This is the Wed before SC, and I'm sure it will be incredibly well attended! ;-) >>> >>> We'd like to cover two things: >>> >>> 1. The state of LaTeX Pythonizing >>> (Recall: the Pythonization -- yes, that's totally a word; you must use it in a sentence with a colleague today -- of the MPI LaTeX is a separate effort than the Embiggening -- yes, that's also a word -- of "count" parameters. Specifically: we're doing a comparable-to-MPI-3.1 Pythonization of the MPI bindings in LaTeX without Embiggening or otherwise changing any parameters. Pythonization opens the door to multiple interesting things in the future, including Embiggening "count" parameters). >>> >>> 2. The state of BigCount / Embiggening >>> There was a reading and much discussion at the last Forum meeting about Embiggening. We'd like to get some Forum feedback before the next Forum meeting in December. >>> >>> -- >>> Jeff Squyres >>> jsquyres(a)cisco.com >>> >>> _______________________________________________ >>> mpiwg-large-counts mailing list >>> mpiwg-large-counts(a)lists.mpi-forum.org >>> https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts >> >> >> -- >> Jeff Squyres >> jsquyres(a)cisco.com >> >> _______________________________________________ >> mpiwg-large-counts mailing list >> mpiwg-large-counts(a)lists.mpi-forum.org >> https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts >

1 0

Re: [Mpiwg-large-counts] Large Count - the principles for counts, sizes, and byte and nonbyte displacements
by Rolf Rabenseifner 02 Nov '19

02 Nov '19

After the Telcon it seems that this ticket is really wrong. Some or all of the routines may/should be kept. And it these routines arean essential part of the future large count concept. Thank you very much for pointing us to this ticket. Rolf ----- Jeff Hammond <jeff.science(a)gmail.com> wrote: > Rolf: > > Have you looked at > https://github.com/mpiwg-large-count/large-count-issues/issues/6? > > Jeff > > On Fri, Nov 1, 2019 at 1:00 AM Rolf Rabenseifner <rabenseifner(a)hlrs.de> > wrote: > > > A small comment on the result of our telcon: > > - Postfix _l for int -> MPI_Count > > - Postfix _x for additionally > > MPI_Aint -> MPI_Count > > I.e., the additional routines in the derived datatype chapter. > > > > Two of them already exist > > MPI_Type_get_(true)extent_x > > > > In Fortran we will have then for the > > same routine two aliases: > > > > - the overload one without _x > > - and the explicit one with _x > > > > For both ones, the internal function name is the same, with _x. > > > > Best regards > > Rolf > > > > > > ----- Jeff Hammond <jeff.science(a)gmail.com> wrote: > > > On Thu, Oct 31, 2019 at 7:48 AM Rolf Rabenseifner <rabenseifner(a)hlrs.de> > > > wrote: > > > > > > > Dear all, > > > > > > > > here my summary as input for our telcon today. > > > > > > > > In principle, it is a very simple question: > > > > > > > > with large Counts, do we > > > > - keep all MPI_Aint > > > > - or do we substitute MPI_Aint by MPI_Count? > > > > > > > > > > I haven't been involved as much lately but did we not use MPI_Count for > > > count and element displacements in the large count proposal? We need to > > > use MPI_Aint for offsets into memory because that is what this type is > > for. > > > > > > Jeff > > > > > > > > > > > > > > In principle, the MPI Forum answered this question already > > > > for MPI-3.0 in 2012 with a clear YES: > > > > > > > > int MPI_Type_get_extent(MPI_Datatype datatype, > > > > MPI_Aint *lb, MPI_Aint *extent) > > > > int MPI_Type_get_extent_x(MPI_Datatype datatype, > > > > MPI_Count *lb, MPI_Count *extent) > > > > > > > > About Jeff H. question: > > > > If we limit the API to not support MPI_Count > > > > means that an MPI implementation has not really such quality options > > > > when using I/O fileviews, because the API is restricted to > > > > MPI_Aint (which should be implemented based on the, e.g., > > > > 64bit memory system). > > > > > > > > About Jim's comment: > > > > > > > > >> Apologies, it's been a while since I looked at the I/O interfaces. > > If > > > > I/O > > > > >> only needs relative displacements that have normal integer > > semantics, > > > > then > > > > >> I don't see why MPI_Count would not work for this purpose. If you > > have > > > > an > > > > >> MPI_Aint that contains a relative displacement, it also has normal > > > > integer > > > > >> semantics and can be converted to an MPI_Count. > > > > > > > > Yes, but this automatically implies that the datatypes must also > > > > be able to handle MPI_Count. > > > > > > > > >> The only case we really > > > > >> need to look out for is when an integer type contains an absolute > > > > address. > > > > >> In those cases, the quantity in the variable cannot be treated as a > > > > normal > > > > >> integer and we need special routines to work with it. > > > > > > > > Yes, this happens when we extend MPI_Aint in the derived datatype > > routines > > > > to MPI_Count. > > > > > > > > But in principle, this is not a big Problem, as you all could see in > > > > the previous emails: > > > > > > > > - We must do for MPI_Count the same as we did for MPI_Aint, > > > > i.e., we'll have long versions of the routines > > > > MPI_Get_address, MPI_Aint_diff, MPI_Aint_add > > > > > > > > - And we must ensure that the type cast from MPI_Aint to > > > > MPI_Count works, which is a small new advice to implementors > > > > for MPI_Det_address. > > > > > > > > Therefore again my 4 questions: > > > > > > > > - Should the new large count routines be prepared for > > > > more than 10 or 20 Exabyte files where we need 64/65 or > > > > or 65/66 unsigned/signed integers for relative byte > > > > displacements or byte counts? > > > > If yes, then all MPI_Aint arguments must be substituted by MPI_Count. > > > > > > > > (In other words, do we want to be prepared for another 25 years of > > MPI? > > > > :-) > > > > > > > > As stated above, the MPI-Forum already decided 2012 with a YES. > > > > > > > > - Should we allow that these new routines are also used for memory > > > > description, > > > > where we typically need only the large MPI_Count "count" arguments? > > > > (or should we provide two different new routines for each routine > > that > > > > currently has int Count/... and MPI_Aint disp/... arguments) > > > > > > > > I expect, that nobody wants to have two different large versions of > > > > for example MPI_Type_create_struct. > > > > > > > > - Should we allow a mix of old and new routines, especially for > > > > memory-based > > > > usage, that old-style MPI_Get_address is used to retrieve an absolute > > > > address and then, e.g., new style MPI_Type_create_struct with > > > > MPI_Count blocklength and displacements is used? > > > > > > > > I expect that forbidding such a mix would be a problem for Software > > > > development. > > > > Often old-style modules must work together with new-style modules. > > > > > > > > - Do we want to require for this type cast of MPI_Aint addr into > > MPI_Count > > > > that it is allowed to do this cast with a normal assignment, rather > > > > than > > > > a special MPI function? > > > > > > > > I expect yes, because for must usage of MPI_Aint and MPI_Count, > > > > it is for relative displacements or byte counts, i.e. for normal > > > > integers and therefore automatic type cast between MPI_Aint > > > > and MPI_Count is a must. > > > > > > > > With yes to all four questions, the proposed solution above is > > > > the easiest way. > > > > > > > > Hope to see/hear you today in our telcon. > > > > > > > > Best regards > > > > Rolf > > > > > > > > > > > > ----- Original Message ----- > > > > > From: "Jeff Hammond" <jeff.science(a)gmail.com> > > > > > To: "mpiwg-large-counts" <mpiwg-large-counts(a)lists.mpi-forum.org> > > > > > Cc: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de>, "Jim Dinan" < > > > > james.dinan(a)gmail.com> > > > > > Sent: Thursday, October 31, 2019 5:58:30 AM > > > > > Subject: Re: [Mpiwg-large-counts] Large Count - the principles for > > > > counts, sizes, and byte and nonbyte displacements > > > > > > > > > What if we just decided not to support IO displacements bigger than > > 2^63? > > > > > What use case would that break? If the underlying filesystem uses > > 128b > > > > > displacements, fine, then MPI will promote into those before using > > the > > > > > system APIs. > > > > > > > > > > We already limit all sorts of things. For example, posting 17 > > billion > > > > > Isends is not guaranteed to work. Maybe it does, but that's a > > quality of > > > > > implementation issue. No sane person is going to have a data type > > > > spanning > > > > > 8 exabyte increments. Not now, not in 2030, not in 2040, not ever. > > > > > > > > > > Jeff > > > > > > > > > > On Wed, Oct 30, 2019 at 9:10 AM Jim Dinan via mpiwg-large-counts < > > > > > mpiwg-large-counts(a)lists.mpi-forum.org> wrote: > > > > > > > > > >> Apologies, it's been a while since I looked at the I/O interfaces. > > If > > > > I/O > > > > >> only needs relative displacements that have normal integer > > semantics, > > > > then > > > > >> I don't see why MPI_Count would not work for this purpose. If you > > have > > > > an > > > > >> MPI_Aint that contains a relative displacement, it also has normal > > > > integer > > > > >> semantics and can be converted to an MPI_Count. The only case we > > really > > > > >> need to look out for is when an integer type contains an absolute > > > > address. > > > > >> In those cases, the quantity in the variable cannot be treated as a > > > > normal > > > > >> integer and we need special routines to work with it. If MPI never > > > > treats > > > > >> an MPI_Count quantity as an absolute address then MPI_Count should > > > > always > > > > >> have normal integer semantics via the MPI interfaces and doesn't > > need > > > > >> special treatment. Unless, of course, we want to enable MPI_Count > > that > > > > is > > > > >> large enough to need special support for basic operations, but > > that's a > > > > >> different can of worms. > > > > >> > > > > >> ~Jim. > > > > >> > > > > >> On Wed, Oct 30, 2019 at 11:02 AM Rolf Rabenseifner < > > > > rabenseifner(a)hlrs.de> > > > > >> wrote: > > > > >> > > > > >>> Dear Jim, > > > > >>> > > > > >>> > This sounds to me like it is creating again the same problem we > > have > > > > >>> with > > > > >>> > MPI_Aint --- one type doing too many things. If MPI_Aint can't > > > > >>> accommodate > > > > >>> > absolute addresses in the I/O interfaces, > > > > >>> > > > > >>> I/O has no absolute addresses. Only relative one, i.e., byte > > > > >>> displacements > > > > >>> and byte sizes. > > > > >>> But they can be huge. > > > > >>> > > > > >>> The same routines are used for message passing, for example > > > > >>> - MPI_TYPE_CREATE_STRUCT or > > > > >>> - MPI_TYPE_CREATE_RESIZED > > > > >>> > > > > >>> > we should consider adding a new > > > > >>> > type like MPI_Faint (file address int) for this quantity and > > include > > > > >>> > accessor routines to ensure manipulations of file addresses > > respect > > > > the > > > > >>> > implementation defined meaning of the bits. > > > > >>> > > > > >>> Yes, you are right, there are two possibilities: > > > > >>> Substitute MPI_Aint in the large count version by > > > > >>> - MPI_Count or > > > > >>> - or by a new type MPI_Laint (for Long Aint) > > > > >>> > > > > >>> Others on this list have already expressed that they never want to > > see > > > > >>> such a MPI_Laint > > > > >>> > > > > >>> > Even in C, it is not portable > > > > >>> > to do arithmetic on intptr_t because the integer representation > > of an > > > > >>> > address is implementation defined. We were careful in the > > > > definition of > > > > >>> > MPI_Aint_add and diff to describe them in terms of casting the > > > > absolute > > > > >>> > address arguments back to pointers before performing arithmetic. > > > > >>> > > > > >>> Yes, therefore, for this longer Version of MPI_Aint, let's name it > > > > >>> for the Moment XXX, we Need > > > > >>> MPI_XXX_diff and MPI_XXX_add, > > > > >>> i.e. MPI_Laint_diff and _add or MPI_Count_diff and _add, > > > > >>> which should be used only if the corresponding addresses > > > > >>> are returned from MPI_Get_address_l. > > > > >>> Or form MPI_Get_address, and with this we have again the > > > > >>> type casting problem between MPI_Aint and MPI_Count or MPI_Laint. > > > > >>> > > > > >>> Best regards > > > > >>> Rolf > > > > >>> > > > > >>> ----- Original Message ----- > > > > >>> > From: "Jim Dinan" <james.dinan(a)gmail.com> > > > > >>> > To: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de> > > > > >>> > Cc: "mpiwg-large-counts" <mpiwg-large-counts(a)lists.mpi-forum.org > > > > > > > >>> > Sent: Wednesday, October 30, 2019 3:45:01 PM > > > > >>> > Subject: Re: [Mpiwg-large-counts] Large Count - the principles > > for > > > > >>> counts, sizes, and byte and nonbyte displacements > > > > >>> > > > > >>> > This sounds to me like it is creating again the same problem we > > have > > > > >>> with > > > > >>> > MPI_Aint --- one type doing too many things. If MPI_Aint can't > > > > >>> accommodate > > > > >>> > absolute addresses in the I/O interfaces, we should consider > > adding a > > > > >>> new > > > > >>> > type like MPI_Faint (file address int) for this quantity and > > include > > > > >>> > accessor routines to ensure manipulations of file addresses > > respect > > > > the > > > > >>> > implementation defined meaning of the bits. Even in C, it is not > > > > >>> portable > > > > >>> > to do arithmetic on intptr_t because the integer representation > > of an > > > > >>> > address is implementation defined. We were careful in the > > > > definition of > > > > >>> > MPI_Aint_add and diff to describe them in terms of casting the > > > > absolute > > > > >>> > address arguments back to pointers before performing arithmetic. > > > > >>> > > > > > >>> > ~Jim. > > > > >>> > > > > > >>> > On Wed, Oct 30, 2019 at 5:18 AM Rolf Rabenseifner < > > > > rabenseifner(a)hlrs.de > > > > >>> > > > > > >>> > wrote: > > > > >>> > > > > > >>> >> Dear all and Jim, > > > > >>> >> > > > > >>> >> Jim asked: > > > > >>> >> > When you assign an MPI_Aint to an MPI_Count, there are two > > cases > > > > >>> >> depending > > > > >>> >> > on what the bits in the MPI_Aint represent: absolute address > > and > > > > >>> relative > > > > >>> >> > displacements. The case where you assign an address to a > > count > > > > >>> doesn't > > > > >>> >> > make sense to me. Why would one do this and why should MPI > > > > support > > > > >>> it? > > > > >>> >> > The case where you assign a displacement to a count seems > > fine, > > > > you > > > > >>> would > > > > >>> >> > want sign extension to happen. > > > > >>> >> > > > > >>> >> The answer is very simple: > > > > >>> >> All derived datatype routines serve describing of memory **and** > > > > file > > > > >>> >> space. > > > > >>> >> > > > > >>> >> Therefore, the large count working group should decide: > > > > >>> >> - Should the new large count routines be prepared for more than > > 10 > > > > or > > > > >>> 20 > > > > >>> >> Exabyte > > > > >>> >> files where we need 64/65 or 65/66 unsigned/signed integers > > for > > > > >>> relative > > > > >>> >> byte > > > > >>> >> displacements or byte counts? > > > > >>> >> If yes, then all MPI_Aint arguments must be substituted by > > > > MPI_Count. > > > > >>> >> (In other words, do we want to be prepared for another 25 > > years of > > > > >>> MPI? > > > > >>> >> :-) > > > > >>> >> - Should we allow that these new routines are also used for > > memory > > > > >>> >> description, > > > > >>> >> where we typically need only the large MPI_Count "count" > > > > arguments? > > > > >>> >> (or should we provide two different new routines for each > > routine > > > > >>> that > > > > >>> >> currently has int Count/... and MPI_Aint disp/... arguments) > > > > >>> >> - Should we allow a mix of old and new routines, especially for > > > > >>> >> memory-based > > > > >>> >> usage, that old-style MPI_Get_address is used to retrieve an > > > > absolute > > > > >>> >> address and then, e.g., new style MPI_Type_create_struct with > > > > >>> >> MPI_Count blocklength and displacements is used? > > > > >>> >> - Do we want to require for this type cast of MPI_Aint addr into > > > > >>> MPI_Count > > > > >>> >> that it is allowed to do this cast with a normal assignment, > > > > rather > > > > >>> than > > > > >>> >> > > > > >>> >> a special MPI function? > > > > >>> >> > > > > >>> >> If we answer all four questions with yes (and in my opinion, we > > > > must) > > > > >>> >> then Jim's question > > > > >>> >> "Why would one do this [assign an address to a Count] > > > > >>> >> and why should MPI support it?" > > > > >>> >> is answered with this set of reasons. > > > > >>> >> > > > > >>> >> I would say, that this is the most complex decision that the > > > > >>> >> large count working group has to decide. > > > > >>> >> A wrong decision would be hard to be fixed in the future. > > > > >>> >> > > > > >>> >> Best regards > > > > >>> >> Rolf > > > > >>> >> > > > > >>> >> ----- Original Message ----- > > > > >>> >> > From: "Jim Dinan" <james.dinan(a)gmail.com> > > > > >>> >> > To: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de> > > > > >>> >> > Cc: "mpiwg-large-counts" < > > mpiwg-large-counts(a)lists.mpi-forum.org> > > > > >>> >> > Sent: Tuesday, October 29, 2019 10:28:46 PM > > > > >>> >> > Subject: Re: [Mpiwg-large-counts] Large Count - the > > principles for > > > > >>> >> counts, sizes, and byte and nonbyte displacements > > > > >>> >> > > > > >>> >> > If you do pointer arithmetic, the compiler will ensure that > > the > > > > >>> result is > > > > >>> >> > correct. If you convert a pointer into an integer and then > > do the > > > > >>> >> > arithmetic, the compiler can't help you and the result is not > > > > >>> portable. > > > > >>> >> > This is why MPI_Aint_add describes what it does in terms of > > > > pointer > > > > >>> >> > arithmetic. The confusing and frustrating thing about > > MPI_Aint is > > > > >>> that > > > > >>> >> > it's one type for two very different purposes. Allowing > > direct > > > > +/- > > > > >>> on > > > > >>> >> > MPI_Aint values that represent addresses is not portable and > > is a > > > > >>> mistake > > > > >>> >> > that we tried to correct with MPI_Aint_add/diff (I am happy to > > > > >>> strengthen > > > > >>> >> > should to must if needed). It's perfectly fine to do > > arithmetic > > > > on > > > > >>> >> > MPI_Aint values that are displacements. > > > > >>> >> > > > > > >>> >> > When you assign an MPI_Aint to an MPI_Count, there are two > > cases > > > > >>> >> depending > > > > >>> >> > on what the bits in the MPI_Aint represent: absolute address > > and > > > > >>> relative > > > > >>> >> > displacements. The case where you assign an address to a > > count > > > > >>> doesn't > > > > >>> >> > make sense to me. Why would one do this and why should MPI > > > > support > > > > >>> it? > > > > >>> >> > The case where you assign a displacement to a count seems > > fine, > > > > you > > > > >>> would > > > > >>> >> > want sign extension to happen. > > > > >>> >> > > > > > >>> >> > ~Jim. > > > > >>> >> > > > > > >>> >> > On Tue, Oct 29, 2019 at 4:52 PM Rolf Rabenseifner < > > > > >>> rabenseifner(a)hlrs.de> > > > > >>> >> > wrote: > > > > >>> >> > > > > > >>> >> >> Dear Jim, > > > > >>> >> >> > > > > >>> >> >> > (a3) Section 4.1.5 of MPI 3.1 states "To ensure > > portability, > > > > >>> >> arithmetic > > > > >>> >> >> on > > > > >>> >> >> > absolute addresses should not be performed with the > > intrinsic > > > > >>> >> operators > > > > >>> >> >> \-" > > > > >>> >> >> > and \+". > > > > >>> >> >> > > > > >>> >> >> The major problem is, that we decided "should" and not > > "maust" or > > > > >>> >> "shall", > > > > >>> >> >> because there is such many existing MPI-1 ... MPI-3.0 code > > that > > > > must > > > > >>> >> have > > > > >>> >> >> used + or - operators. > > > > >>> >> >> > > > > >>> >> >> The only objective, that is true from the beginning, that MPI > > > > >>> addresses > > > > >>> >> >> must be > > > > >>> >> >> retrieved with MPI_Get_address. > > > > >>> >> >> > > > > >>> >> >> And the second also Major Problem is the new assigment of an > > > > >>> MPI_Aint > > > > >>> >> >> value > > > > >>> >> >> into an MPI_Count variable with MPI_Count larger than > > MPI_Aint. > > > > >>> >> >> > > > > >>> >> >> Therefore, I would prefere, that we keep this "should" and > > > > design in > > > > >>> >> long > > > > >>> >> >> term > > > > >>> >> >> MPI_Get_address in a way that in principle MPI_Aint_diff and > > _add > > > > >>> >> >> need not to do anythin else as the + or - operator. > > > > >>> >> >> > > > > >>> >> >> And this depends on the meaning of the unsigned addresses, > > i.e., > > > > >>> >> >> what is the sequence of addresses (i.e., is it really going > > from > > > > >>> >> >> 0 to FFFF...FFFF) and than mapping these addreses to the > > > > >>> mathematical > > > > >>> >> >> sequence > > > > >>> >> >> of MPI_Aint which starts at -2**(n-1) and ends at 2**(n-1)-1. > > > > >>> >> >> > > > > >>> >> >> Thats all. For the moment, as far as the web and some emails > > told > > > > >>> us, > > > > >>> >> >> we are fare away from this contiguous 64-bit address space > > (0 to > > > > >>> >> >> FFFF...FFFF). > > > > >>> >> >> > > > > >>> >> >> But we should be correctly prepared. > > > > >>> >> >> > > > > >>> >> >> Or in other words: > > > > >>> >> >> > (a2) Should be solved by MPI_Aint_add/diff. > > > > >>> >> >> In my opinion no, it must be solved by MPI_Get_addr > > > > >>> >> >> and MPI_Aint_add/diff can stay normal + or - operators. > > > > >>> >> >> > > > > >>> >> >> I should also mention, that of course all MPI routines that > > > > >>> >> >> accept MPI_BOOTOM must reverse the work of MPI_Get_address > > > > >>> >> >> to get back the real "unsigned" virtual addresses of the OS. > > > > >>> >> >> > > > > >>> >> >> The same what we already had if an implementation has chosen > > > > >>> >> >> to use the address of an MPI common block as base for > > MPI_BOTTOM. > > > > >>> >> >> Here, the MPI lib had the freedom to revert the mapping > > > > >>> >> >> within MPI_Get_addr or within all functions called with > > > > MPI_BOTTOM. > > > > >>> >> >> > > > > >>> >> >> Best regards > > > > >>> >> >> Rolf > > > > >>> >> >> > > > > >>> >> >> > > > > >>> >> >> > > > > >>> >> >> ----- Original Message ----- > > > > >>> >> >> > From: "Jim Dinan" <james.dinan(a)gmail.com> > > > > >>> >> >> > To: "Rolf Rabenseifner" <rabenseifner(a)hlrs.de> > > > > >>> >> >> > Cc: "mpiwg-large-counts" < > > > > mpiwg-large-counts(a)lists.mpi-forum.org> > > > > >>> >> >> > Sent: Tuesday, October 29, 2019 3:58:18 PM > > > > >>> >> >> > Subject: Re: [Mpiwg-large-counts] Large Count - the > > principles > > > > for > > > > >>> >> >> counts, sizes, and byte and nonbyte displacements > > > > >>> >> >> > > > > >>> >> >> > Hi Rolf, > > > > >>> >> >> > > > > > >>> >> >> > (a1) seems to me like another artifact of storing an > > unsigned > > > > >>> quantity > > > > >>> >> >> in a > > > > >>> >> >> > signed variable, i.e., the quantity in an MPI_Aint can be > > an > > > > >>> unsigned > > > > >>> >> >> > address or a signed displacement. Since we don't have an > > > > unsigned > > > > >>> >> type > > > > >>> >> >> for > > > > >>> >> >> > addresses, the user can't portably fix this above MPI. We > > will > > > > >>> need > > > > >>> >> to > > > > >>> >> >> add > > > > >>> >> >> > functions to deal with combinations of MPI_Aint and > > MPI_Counts. > > > > >>> This > > > > >>> >> is > > > > >>> >> >> > essentially why we needed MPI_Aint_add/diff. Or ... the > > golden > > > > >>> (Au is > > > > >>> >> >> > gold) int ... MPI_Auint. > > > > >>> >> >> > > > > > >>> >> >> > (a2) Should be solved by MPI_Aint_add/diff. > > > > >>> >> >> > > > > > >>> >> >> > (a3) Section 4.1.5 of MPI 3.1 states "To ensure > > portability, > > > > >>> >> arithmetic > > > > >>> >> >> on > > > > >>> >> >> > absolute addresses should not be performed with the > > intrinsic > > > > >>> >> operators > > > > >>> >> >> \-" > > > > >>> >> >> > and \+". MPI_Aint_add was written carefully to indicate > > that > > > > the > > > > >>> >> "base" > > > > >>> >> >> > argument is treated as an unsigned address and the "disp" > > > > >>> argument is > > > > >>> >> >> > treated as a signed displacement. > > > > >>> >> >> > > > > > >>> >> >> > ~Jim. > > > > >>> >> >> > > > > > >>> >> >> > On Tue, Oct 29, 2019 at 5:19 AM Rolf Rabenseifner < > > > > >>> >> rabenseifner(a)hlrs.de> > > > > >>> >> >> > wrote: > > > > >>> >> >> > > > > > >>> >> >> >> Dear Jim and all, > > > > >>> >> >> >> > > > > >>> >> >> >> I'm not sure whether I'm really able to understand your > > email. > > > > >>> >> >> >> > > > > >>> >> >> >> I take the MPI view: > > > > >>> >> >> >> > > > > >>> >> >> >> (1) An absolute address can stored in an MPI_Aint variable > > > > >>> >> >> >> with and only with MPI_Get_address or MPI_Aint_add. > > > > >>> >> >> >> > > > > >>> >> >> >> (2) A positive or negative number of bytes or a relative > > > > address > > > > >>> >> >> >> which is by definition the amount of bytes between two > > > > >>> locations > > > > >>> >> >> >> in a MPI "sequential storage" (MPI-3.1 page 115) > > > > >>> >> >> >> can be assigned with any method to an MPI_Aint > > variable > > > > >>> >> >> >> as long as the original value fits into MPI_Aint. > > > > >>> >> >> >> In both languages automatic type cast (i.e., sign > > > > expansion) > > > > >>> >> >> >> is done. > > > > >>> >> >> >> > > > > >>> >> >> >> (3) If users misuse MPI_Aint for storing anything else > > into > > > > >>> MPI_Aint > > > > >>> >> >> >> variable then this is out of scope of MPI. > > > > >>> >> >> >> If such values are used in a minus operation then it > > is > > > > >>> >> >> >> out of the scope of MPI whether this makes sense. > > > > >>> >> >> >> If the user is sure that the new value falls into > > category > > > > >>> (2) > > > > >>> >> >> >> then all is fine as long as the user is correct. > > > > >>> >> >> >> > > > > >>> >> >> >> I expect that your => is not a "greater or equal than". > > > > >>> >> >> >> I expect that you noticed assignments. > > > > >>> >> >> >> > > > > >>> >> >> >> > intptr_t => MPI_Aint > > > > >>> >> >> >> "intptr_t: integer type capable of holding a pointer." > > > > >>> >> >> >> > > > > >>> >> >> >> > uintptr_t => ??? (Anyone remember the MPI_Auint "golden > > > > Aint" > > > > >>> >> >> proposal?) > > > > >>> >> >> >> "uintptr_t: unsigned integer type capable of holding a > > > > pointer." > > > > >>> >> >> >> > > > > >>> >> >> >> may fall exactly exactly into (3) when used for pointers. > > > > >>> >> >> >> > > > > >>> >> >> >> > > > > >>> >> >> >> Especially on a 64 bit system the user may have in the > > future > > > > >>> exactly > > > > >>> >> >> >> the problems (a), (a1), (a2) and (b) as described below. > > > > >>> >> >> >> But here, the user is responsible, to for example > > implement > > > > (a3), > > > > >>> >> >> >> whereas for MPI_Get_address, the implementors of the MPI > > > > library > > > > >>> >> >> >> are responsible and the MPI Forum may be responsible for > > > > giving > > > > >>> >> >> >> the correct advices. > > > > >>> >> >> >> > > > > >>> >> >> >> By the way, the golden MPI_Auint was never golden. > > > > >>> >> >> >> Such need was "resolved" by introducing MPI_Aint_diff and > > > > >>> >> MPI_Aint_add > > > > >>> >> >> >> in MPI-3.1. > > > > >>> >> >> >> > > > > >>> >> >> >> > > > > >>> >> >> >> > ptrdiff_t => MPI_Aint > > > > >>> >> >> >> "std::ptrdiff_t is the signed integer type of the result > > of > > > > >>> >> subtracting > > > > >>> >> >> >> two pointers." > > > > >>> >> >> >> > > > > >>> >> >> >> may perfectly fit to (2). > > > > >>> >> >> >> > > > > >>> >> >> >> All of the following falls into category (2): > > > > >>> >> >> >> > > > > >>> >> >> >> > size_t (sizeof) => MPI_Count, int > > > > >>> >> >> >> "sizeof( type ) (1) > > > > >>> >> >> >> sizeof expression (2) > > > > >>> >> >> >> Both versions are constant expressions of type > > std::size_t." > > > > >>> >> >> >> > > > > >>> >> >> >> > size_t (offsetof) => MPI_Aint, int > > > > >>> >> >> >> "Defined in header <cstddef> > > > > >>> >> >> >> #define offsetof(type, member) /*implementation-defined*/ > > > > >>> >> >> >> The macro offsetof expands to an integral constant > > expression > > > > >>> >> >> >> of type std::size_t, the value of which is the offset, in > > > > bytes, > > > > >>> >> >> >> from the beginning of an object of specified type to ist > > > > >>> >> >> >> specified member, including padding if any." > > > > >>> >> >> >> > > > > >>> >> >> >> Note that this offsetof has nothing to do with MPI_Offset. > > > > >>> >> >> >> > > > > >>> >> >> >> On a system with less than 2*31 byte and 4-byte int, it is > > > > >>> guaranteed > > > > >>> >> >> >> that size_t => int works. > > > > >>> >> >> >> > > > > >>> >> >> >> On a system with less than 2*63 byte and 8-byte MPI_Aint, > > it > > > > is > > > > >>> >> >> guaranteed > > > > >>> >> >> >> that size_t => MPI_Aint works. > > > > >>> >> >> >> > > > > >>> >> >> >> Problem: size_t is unsigned, int and MPI_Aint are signed. > > > > >>> >> >> >> > > > > >>> >> >> >> MPI_Count should be defined in a way that on systems with > > more > > > > >>> than > > > > >>> >> >> >> 2**63 Bytes of disc space, that MPI_Count can hold such > > > > values, > > > > >>> >> >> >> because > > > > >>> >> >> >> int .LE. {MPI_Aint, MPI_Offset} .LE. MPI_Count > > > > >>> >> >> >> > > > > >>> >> >> >> Therefore size_t => MPI_Count should always work. > > > > >>> >> >> >> > > > > >>> >> >> >> > ssize_t => Mostly for error handling. Out of scope for > > MPI? > > > > >>> >> >> >> "In short, ssize_t is the same as size_t, but is a signed > > > > type - > > > > >>> >> >> >> read ssize_t as “signed size_t”. ssize_t is able to > > represent > > > > >>> >> >> >> the number -1, which is returned by several system calls > > > > >>> >> >> >> and library functions as a way to indicate error. > > > > >>> >> >> >> For example, the read and write system calls: ... > > > > >>> >> >> >> ssize_t read(int fildes, void *buf, size_t nbyte); ..." > > > > >>> >> >> >> > > > > >>> >> >> >> ssize_t fits therefore better to MPI_Aint, because both > > > > >>> >> >> >> are signed types that can hold byte counts, but > > > > >>> >> >> >> the value -1 in a MPI_Aint variable stands for a > > > > >>> >> >> >> byte displacement of -1 bytes and not for an error code > > -1. > > > > >>> >> >> >> > > > > >>> >> >> >> > > > > >>> >> >> >> All use of (2) is in principle no problem. > > > > >>> >> >> >> ------------------------------------------ > > > > >>> >> >> >> > > > > >>> >> >> >> All the complex discussiuon of the last days is about (1): > > > > >>> >> >> >> > > > > >>> >> >> >> (1) An absolute address can stored in an MPI_Aint variable > > > > >>> >> >> >> with and only with MPI_Get_address or MPI_Aint_add. > > > > >>> >> >> >> > > > > >>> >> >> >> In MPI-1 to MPI-3.0 and still in MPI-3.1 (here as may be > > not > > > > >>> >> portable), > > > > >>> >> >> >> we also allow > > > > >>> >> >> >> MPI_Aint variable := absolute address in MPI_Aint > > variable > > > > >>> >> >> >> + or - > > > > >>> >> >> >> a number of bytes (in any integer > > type). > > > > >>> >> >> >> > > > > >>> >> >> >> The result is then still in category (1). > > > > >>> >> >> >> > > > > >>> >> >> >> > > > > >>> >> >> >> For the difference of two absolute addresses, > > > > >>> >> >> >> MPI_Aint_diff can be used. The result is than MPI_Aint of > > > > >>> category > > > > >>> >> (2) > > > > >>> >> >> >> > > > > >>> >> >> >> In MPI-1 to MPI-3.0 and still in MPI-3.1 (here as may be > > not > > > > >>> >> portable), > > > > >>> >> >> >> we also allow > > > > >>> >> >> >> MPI_Aint variable := absolute address in MPI_Aint > > variable > > > > >>> >> >> >> - absolute address in MPI_Aint > > variable. > > > > >>> >> >> >> > > > > >>> >> >> >> The result is then in category (2). > > > > >>> >> >> >> > > > > >>> >> >> >> > > > > >>> >> >> >> The problems we discuss the last days are about systems > > > > >>> >> >> >> that internally use unsigned addresses and the MPI library > > > > stores > > > > >>> >> >> >> these addresses into MPI_Aint variables and > > > > >>> >> >> >> > > > > >>> >> >> >> (a) a sequential storage can have virtual addresses that > > > > >>> >> >> >> are both in the area with highest bit =0 and other > > > > addresses > > > > >>> >> >> >> in the same sequential storage (i.e., same array or > > > > >>> structure) > > > > >>> >> >> >> with highest bit =1. > > > > >>> >> >> >> > > > > >>> >> >> >> or > > > > >>> >> >> >> (b) some higher bits contain segment addresses. > > > > >>> >> >> >> > > > > >>> >> >> >> (b) is not a problem as long as a sequential storage > > resides > > > > >>> >> >> >> always within one Segment. > > > > >>> >> >> >> > > > > >>> >> >> >> Therefore, we only have to discuss (a). > > > > >>> >> >> >> > > > > >>> >> >> >> The two problems that we have is > > > > >>> >> >> >> (a1) that for the minus operations an integer overflow > > will > > > > >>> >> >> >> happen and must be ignored. > > > > >>> >> >> >> (a2) if such addresses are expanded to larger variables, > > > > >>> >> >> >> e.g., MPI_Count with more bits in MPI_Count than in > > > > >>> MPI_Aint, > > > > >>> >> >> >> sign expansion will result in completely wring > > results. > > > > >>> >> >> >> > > > > >>> >> >> >> And here, the most simple trick is, > > > > >>> >> >> >> (a3) that MPI_Get_address really shall > > > > >>> >> >> >> map the contiguous unsigned range from 0 to 2**64-1 to the > > > > >>> >> >> >> signed (and also contiguous) range from -2**63 to 2**63-1 > > > > >>> >> >> >> by simple subtracting 2**63. > > > > >>> >> >> >> With this simple trick in MPI_Get_address, Problems > > > > >>> >> >> >> 8a1) and (a2) are resolved. > > > > >>> >> >> >> > > > > >>> >> >> >> It looks like that (a) and therefore (a1) and (a2) > > > > >>> >> >> >> may be far in the future. > > > > >>> >> >> >> But they may be less far in the future, if a system may > > > > >>> >> >> >> map the whole applications cluster address space > > > > >>> >> >> >> into virtual memory (not cache coherent, but accessible). > > > > >>> >> >> >> > > > > >>> >> >> >> > > > > >>> >> >> >> And all this is never or only partial written into the > > > > >>> >> >> >> MPI Standard, also all is (well) known by the MPI Forum, > > > > >>> >> >> >> with the following exceptions: > > > > >>> >> >> >> - (a2) is new. > > > > >>> >> >> >> - (a1) is solved in MPI-3.1 only for MPI_Aint_diff and > > > > >>> >> >> >> MPI_Aint_add, but not for the operators - and + > > > > >>> >> >> >> if a user will switch on integer overflow detection > > > > >>> >> >> >> in the future when we will have such large systems. > > > > >>> >> >> >> - (a3) is new and in principle solves the problem also > > > > >>> >> >> >> for + and - operators. > > > > >>> >> >> >> > > > > >>> >> >> >> At lease (a1)+(a2) should be added as rationale to MPI-4.0 > > > > >>> >> >> >> and (a3) as advice to implementors within the framework > > > > >>> >> >> >> of big count, because (a2) is newly coming with big count. > > > > >>> >> >> >> > > > > >>> >> >> >> I hope this helps a bit if you took the time to read > > > > >>> >> >> >> this long email. > > > > >>> >> >> >> > > > > >>> >> >> >> Best regards > > > > >>> >> >> >> Rolf > > > > >>> >> >> >> > > > > >>> >> >> >> > > > > >>> >> >> >> > > > > >>> >> >> >> ----- Original Message ----- > > > > >>> >> >> >> > From: "mpiwg-large-counts" < > > > > >>> mpiwg-large-counts(a)lists.mpi-forum.org > > > > >>> >> > > > > > >>> >> >> >> > To: "mpiwg-large-counts" < > > > > >>> mpiwg-large-counts(a)lists.mpi-forum.org> > > > > >>> >> >> >> > Cc: "Jim Dinan" <james.dinan(a)gmail.com>, "James Dinan" > > < > > > > >>> >> >> >> james.dinan(a)intel.com> > > > > >>> >> >> >> > Sent: Monday, October 28, 2019 5:07:37 PM > > > > >>> >> >> >> > Subject: Re: [Mpiwg-large-counts] Large Count - the > > > > principles > > > > >>> for > > > > >>> >> >> >> counts, sizes, and byte and nonbyte displacements > > > > >>> >> >> >> > > > > >>> >> >> >> > Still not sure I see the issue. MPI's memory-related > > > > integers > > > > >>> >> should > > > > >>> >> >> map > > > > >>> >> >> >> to > > > > >>> >> >> >> > types that serve the same function in C. If the base > > > > language > > > > >>> is > > > > >>> >> >> broken > > > > >>> >> >> >> for > > > > >>> >> >> >> > segmented addressing, we won't be able to fix it in a > > > > library. > > > > >>> >> Looking > > > > >>> >> >> >> at the > > > > >>> >> >> >> > mapping below, I don't see where we would have broken > > it: > > > > >>> >> >> >> > > > > > >>> >> >> >> > intptr_t => MPI_Aint > > > > >>> >> >> >> > uintptr_t => ??? (Anyone remember the MPI_Auint "golden > > > > Aint" > > > > >>> >> >> proposal?) > > > > >>> >> >> >> > ptrdiff_t => MPI_Aint > > > > >>> >> >> >> > size_t (sizeof) => MPI_Count, int > > > > >>> >> >> >> > size_t (offsetof) => MPI_Aint, int > > > > >>> >> >> >> > ssize_t => Mostly for error handling. Out of scope for > > MPI? > > > > >>> >> >> >> > > > > > >>> >> >> >> > It sounds like there are some places where we used > > MPI_Aint > > > > in > > > > >>> >> place > > > > >>> >> >> of > > > > >>> >> >> >> size_t > > > > >>> >> >> >> > for sizes. Not great, but MPI_Aint already needs to be > > at > > > > >>> least as > > > > >>> >> >> large > > > > >>> >> >> >> as > > > > >>> >> >> >> > size_t, so this seems benign. > > > > >>> >> >> >> > > > > > >>> >> >> >> > ~Jim. > > > > >>> >> >> >> > > > > > >>> >> >> >> > On Fri, Oct 25, 2019 at 8:25 PM Dinan, James via > > > > >>> >> mpiwg-large-counts < > > > > >>> >> >> [ > > > > >>> >> >> >> > mailto:[email protected] | > > > > >>> >> >> >> > mpiwg-large-counts(a)lists.mpi-forum.org ] > wrote: > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > Jeff, thanks so much for opening up these old wounds. > > I’m > > > > not > > > > >>> sure > > > > >>> >> I > > > > >>> >> >> >> have enough > > > > >>> >> >> >> > context to contribute to the discussion. Where can I > > read up > > > > >>> on the > > > > >>> >> >> >> issue with > > > > >>> >> >> >> > MPI_Aint? > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > I’m glad to hear that C signed integers will finally > > have a > > > > >>> >> >> well-defined > > > > >>> >> >> >> > representation. > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > ~Jim. > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > From: Jeff Hammond < [ mailto:[email protected] | > > > > >>> >> >> >> jeff.science(a)gmail.com ] > > > > >>> >> >> >> > > > > > > >>> >> >> >> > Date: Thursday, October 24, 2019 at 7:03 PM > > > > >>> >> >> >> > To: "Jeff Squyres (jsquyres)" < [ mailto: > > jsquyres(a)cisco.com > > > > | > > > > >>> >> >> >> jsquyres(a)cisco.com > > > > >>> >> >> >> > ] > > > > > >>> >> >> >> > Cc: MPI BigCount Working Group < [ mailto: > > > > >>> >> >> >> mpiwg-large-counts(a)lists.mpi-forum.org > > > > >>> >> >> >> > | mpiwg-large-counts(a)lists.mpi-forum.org ] >, "Dinan, > > > > James" > > > > >>> < [ > > > > >>> >> >> >> > mailto:[email protected] | james.dinan(a)intel.com ] > > > > > > > >>> >> >> >> > Subject: Re: [Mpiwg-large-counts] Large Count - the > > > > principles > > > > >>> for > > > > >>> >> >> >> counts, > > > > >>> >> >> >> > sizes, and byte and nonbyte displacements > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > Jim (cc) suffered the most in MPI 3.0 days because of > > > > >>> AINT_DIFF and > > > > >>> >> >> >> AINT_SUM, so > > > > >>> >> >> >> > maybe he wants to create this ticket. > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > Jeff > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > On Thu, Oct 24, 2019 at 2:41 PM Jeff Squyres (jsquyres) > > < [ > > > > >>> >> >> >> > mailto:[email protected] | jsquyres(a)cisco.com ] > > > wrote: > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > Not opposed to ditching segmented addressing at all. > > We'd > > > > need > > > > >>> a > > > > >>> >> >> ticket > > > > >>> >> >> >> for this > > > > >>> >> >> >> > ASAP, though. > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > This whole conversation is predicated on: > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > - MPI supposedly supports segmented addressing > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > - MPI_Aint is not sufficient for modern segmented > > addressing > > > > >>> (i.e., > > > > >>> >> >> >> representing > > > > >>> >> >> >> > an address that may not be in main RAM and is not > > mapped in > > > > to > > > > >>> the > > > > >>> >> >> >> current > > > > >>> >> >> >> > process' linear address space) > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > If we no longer care about segmented addressing, that > > makes > > > > a > > > > >>> whole > > > > >>> >> >> >> bunch of > > > > >>> >> >> >> > BigCount stuff a LOT easier. E.g., MPI_Aint can > > basically > > > > be a > > > > >>> >> >> >> > non-segment-supporting address integer. AINT_DIFF and > > > > AINT_SUM > > > > >>> can > > > > >>> >> go > > > > >>> >> >> >> away, > > > > >>> >> >> >> > too. > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > On Oct 24, 2019, at 5:35 PM, Jeff Hammond via > > > > >>> mpiwg-large-counts < > > > > >>> >> [ > > > > >>> >> >> >> > mailto:[email protected] | > > > > >>> >> >> >> > mpiwg-large-counts(a)lists.mpi-forum.org ] > wrote: > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > Rolf: > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > Before anybody spends any time analyzing how we handle > > > > >>> segmented > > > > >>> >> >> >> addressing, I > > > > >>> >> >> >> > want you to provide an example of a platform where this > > is > > > > >>> >> relevant. > > > > >>> >> >> What > > > > >>> >> >> >> > system can you boot today that needs this and what MPI > > > > >>> libraries > > > > >>> >> have > > > > >>> >> >> >> expressed > > > > >>> >> >> >> > an interest in supporting it? > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > For anyone who didn't hear, ISO C and C++ have finally > > > > >>> committed to > > > > >>> >> >> >> > twos-complement integers ( [ > > > > >>> >> >> >> > > > > > >>> >> > > > > http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0907r1.html > > > > >>> >> >> | > > > > >>> >> >> >> > > > > > >>> >> > > > > http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0907r1.html > > > > >>> >> >> ] > > > > >>> >> >> >> , [ > > > > >>> >> >> >> > > > http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2218.htm | > > > > >>> >> >> >> > > > http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2218.htm > > > > ] ) > > > > >>> >> because > > > > >>> >> >> >> modern > > > > >>> >> >> >> > programmers should not be limited by hardware designs > > from > > > > the > > > > >>> >> 1960s. > > > > >>> >> >> We > > > > >>> >> >> >> should > > > > >>> >> >> >> > similarly not waste our time on obsolete features like > > > > >>> >> segmentation. > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > Jeff > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > On Thu, Oct 24, 2019 at 10:13 AM Rolf Rabenseifner via > > > > >>> >> >> >> mpiwg-large-counts < [ > > > > >>> >> >> >> > mailto:[email protected] | > > > > >>> >> >> >> > mpiwg-large-counts(a)lists.mpi-forum.org ] > wrote: > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> >> I think that changes the conversation entirely, right? > > > > >>> >> >> >> > > > > > >>> >> >> >> > Not the first part, the state-of-current-MPI. > > > > >>> >> >> >> > > > > > >>> >> >> >> > It may change something for the future, or a new > > interface > > > > may > > > > >>> be > > > > >>> >> >> needed. > > > > >>> >> >> >> > > > > > >>> >> >> >> > Please, can you describe how MPI_Get_address can work > > with > > > > the > > > > >>> >> >> >> > different variables from different memory segments. > > > > >>> >> >> >> > > > > > >>> >> >> >> > Or whether a completely new function or a set of > > functions > > > > is > > > > >>> >> needed. > > > > >>> >> >> >> > > > > > >>> >> >> >> > If we can still express variables from all memory > > segments > > > > as > > > > >>> >> >> >> > input to MPI_Get_address, there may be still a way to > > > > flatten > > > > >>> >> >> >> > the result of some internal address-iquiry into a > > flattened > > > > >>> >> >> >> > signed integer with the same behavior as MPI_Aint today. > > > > >>> >> >> >> > > > > > >>> >> >> >> > If this is impossible, then new way of thinking and > > solution > > > > >>> >> >> >> > may be needed. > > > > >>> >> >> >> > > > > > >>> >> >> >> > I really want to see examples for all current stuff as > > you > > > > >>> >> >> >> > mentioned in your last email. > > > > >>> >> >> >> > > > > > >>> >> >> >> > Best regards > > > > >>> >> >> >> > Rolf > > > > >>> >> >> >> > > > > > >>> >> >> >> > ----- Original Message ----- > > > > >>> >> >> >> >> From: "Jeff Squyres" < [ mailto:[email protected] | > > > > >>> >> >> jsquyres(a)cisco.com > > > > >>> >> >> >> ] > > > > > >>> >> >> >> >> To: "Rolf Rabenseifner" < [ mailto: > > rabenseifner(a)hlrs.de | > > > > >>> >> >> >> rabenseifner(a)hlrs.de ] > > > > >>> >> >> >> >> > > > > > >>> >> >> >> >> Cc: "mpiwg-large-counts" < [ mailto: > > > > >>> >> >> >> mpiwg-large-counts(a)lists.mpi-forum.org | > > > > >>> >> >> >> >> mpiwg-large-counts(a)lists.mpi-forum.org ] > > > > > >>> >> >> >> >> Sent: Thursday, October 24, 2019 5:27:31 PM > > > > >>> >> >> >> >> Subject: Re: [Mpiwg-large-counts] Large Count - the > > > > >>> principles for > > > > >>> >> >> >> counts, > > > > >>> >> >> >> >> sizes, and byte and nonbyte displacements > > > > >>> >> >> >> > > > > > >>> >> >> >> >> On Oct 24, 2019, at 11:15 AM, Rolf Rabenseifner > > > > >>> >> >> >> >> < [ mailto:[email protected] | rabenseifner(a)hlrs.de > > ] > > > > >>> <mailto: > > > > >>> >> [ > > > > >>> >> >> >> >> mailto:[email protected] | rabenseifner(a)hlrs.de ] > > >> > > > > >>> wrote: > > > > >>> >> >> >> >> > > > > >>> >> >> >> >> For me, it looked like that there was some > > misunderstanding > > > > >>> >> >> >> >> of the concept that absolute and relative addresses > > > > >>> >> >> >> >> and number of bytes that can be stored in MPI_Aint. > > > > >>> >> >> >> >> > > > > >>> >> >> >> >> ...with the caveat that MPI_Aint -- as it is right now > > -- > > > > >>> does not > > > > >>> >> >> >> support > > > > >>> >> >> >> >> modern segmented memory systems (i.e., where you need > > more > > > > >>> than a > > > > >>> >> >> small > > > > >>> >> >> >> number > > > > >>> >> >> >> >> of bits to indicate the segment where the memory > > lives). > > > > >>> >> >> >> >> > > > > >>> >> >> >> >> I think that changes the conversation entirely, right? > > > > >>> >> >> >> >> > > > > >>> >> >> >> >> -- > > > > >>> >> >> >> >> Jeff Squyres > > > > >>> >> >> >> >> [ mailto:[email protected] | jsquyres(a)cisco.com ] > > > > <mailto: [ > > > > >>> >> >> >> >> mailto:[email protected] | jsquyres(a)cisco.com ] > > > > > >>> >> >> >> > > > > > >>> >> >> >> > -- > > > > >>> >> >> >> > Dr. Rolf Rabenseifner . . . . . . . . . .. email [ > > mailto: > > > > >>> >> >> >> rabenseifner(a)hlrs.de | > > > > >>> >> >> >> > rabenseifner(a)hlrs.de ] . > > > > >>> >> >> >> > High Performance Computing Center (HLRS) . phone > > > > >>> >> ++49(0)711/685-65530 > > > > >>> >> >> . > > > > >>> >> >> >> > University of Stuttgart . . . . . . . . .. fax > > ++49(0)711 / > > > > >>> >> 685-65832 > > > > >>> >> >> . > > > > >>> >> >> >> > Head of Dpmt Parallel Computing . . . [ > > > > >>> >> >> >> http://www.hlrs.de/people/rabenseifner | > > > > >>> >> >> >> > www.hlrs.de/people/rabenseifner ] . > > > > >>> >> >> >> > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . > > (Office: > > > > Room > > > > >>> >> 1.307) > > > > >>> >> >> . > > > > >>> >> >> >> > _______________________________________________ > > > > >>> >> >> >> > mpiwg-large-counts mailing list > > > > >>> >> >> >> > [ mailto:[email protected] | > > > > >>> >> >> >> > mpiwg-large-counts(a)lists.mpi-forum.org ] > > > > >>> >> >> >> > [ > > > > >>> https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts > > > > >>> >> | > > > > >>> >> >> >> > > > > > >>> https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts ] > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > -- > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > Jeff Hammond > > > > >>> >> >> >> > [ mailto:[email protected] | > > jeff.science(a)gmail.com ] > > > > >>> >> >> >> > [ http://jeffhammond.github.io/ | > > > > >>> http://jeffhammond.github.io/ ] > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > _______________________________________________ > > > > >>> >> >> >> > mpiwg-large-counts mailing list > > > > >>> >> >> >> > [ mailto:[email protected] | > > > > >>> >> >> >> > mpiwg-large-counts(a)lists.mpi-forum.org ] > > > > >>> >> >> >> > [ > > > > >>> https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts > > > > >>> >> | > > > > >>> >> >> >> > > > > > >>> https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts ] > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > -- > > > > >>> >> >> >> > Jeff Squyres > > > > >>> >> >> >> > [ mailto:[email protected] | jsquyres(a)cisco.com ] > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > -- > > > > >>> >> >> >> > > > > > >>> >> >> >> > > > > > >>> >> >> >> > Jeff Hammond > > > > >>> >> >> >> > [ mailto:[email protected] | > > jeff.science(a)gmail.com ] > > > > >>> >> >> >> > [ http://jeffhammond.github.io/ | > > > > >>> http://jeffhammond.github.io/ ] > > > > >>> >> >> >> > _______________________________________________ > > > > >>> >> >> >> > mpiwg-large-counts mailing list > > > > >>> >> >> >> > [ mailto:[email protected] | > > > > >>> >> >> >> > mpiwg-large-counts(a)lists.mpi-forum.org ] > > > > >>> >> >> >> > [ > > > > >>> https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts > > > > >>> >> | > > > > >>> >> >> >> > > > > > >>> https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts ] > > > > >>> >> >> >> > > > > > >>> >> >> >> > _______________________________________________ > > > > >>> >> >> >> > mpiwg-large-counts mailing list > > > > >>> >> >> >> > mpiwg-large-counts(a)lists.mpi-forum.org > > > > >>> >> >> >> > > > > > >>> https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts > > > > >>> >> >> >> > > > > >>> >> >> >> -- > > > > >>> >> >> >> Dr. Rolf Rabenseifner . . . . . . . . . .. email > > > > >>> >> rabenseifner(a)hlrs.de . > > > > >>> >> >> >> High Performance Computing Center (HLRS) . phone > > > > >>> >> ++49(0)711/685-65530 . > > > > >>> >> >> >> University of Stuttgart . . . . . . . . .. fax ++49(0)711 > > / > > > > >>> >> 685-65832 . > > > > >>> >> >> >> Head of Dpmt Parallel Computing . . . > > > > >>> >> www.hlrs.de/people/rabenseifner . > > > > >>> >> >> >> Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: > > Room > > > > >>> >> 1.307) . > > > > >>> >> >> > > > > >>> >> >> -- > > > > >>> >> >> Dr. Rolf Rabenseifner . . . . . . . . . .. email > > > > >>> rabenseifner(a)hlrs.de . > > > > >>> >> >> High Performance Computing Center (HLRS) . phone > > > > >>> ++49(0)711/685-65530 . > > > > >>> >> >> University of Stuttgart . . . . . . . . .. fax ++49(0)711 / > > > > >>> 685-65832 . > > > > >>> >> >> Head of Dpmt Parallel Computing . . . > > > > >>> www.hlrs.de/people/rabenseifner . > > > > >>> >> >> Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: > > Room > > > > >>> 1.307) . > > > > >>> >> > > > > >>> >> -- > > > > >>> >> Dr. Rolf Rabenseifner . . . . . . . . . .. email > > > > rabenseifner(a)hlrs.de > > > > >>> . > > > > >>> >> High Performance Computing Center (HLRS) . phone > > > > ++49(0)711/685-65530 . > > > > >>> >> University of Stuttgart . . . . . . . . .. fax ++49(0)711 / > > > > 685-65832 . > > > > >>> >> Head of Dpmt Parallel Computing . . . > > > > www.hlrs.de/people/rabenseifner > > > > >>> . > > > > >>> >> Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room > > > > 1.307) . > > > > >>> > > > > >>> -- > > > > >>> Dr. Rolf Rabenseifner . . . . . . . . . .. email > > rabenseifner(a)hlrs.de > > > > . > > > > >>> High Performance Computing Center (HLRS) . phone > > ++49(0)711/685-65530 . > > > > >>> University of Stuttgart . . . . . . . . .. fax ++49(0)711 / > > 685-65832 . > > > > >>> Head of Dpmt Parallel Computing . . . > > www.hlrs.de/people/rabenseifner > > > > . > > > > >>> Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room > > 1.307) . > > > > >>> > > > > >> _______________________________________________ > > > > >> mpiwg-large-counts mailing list > > > > >> mpiwg-large-counts(a)lists.mpi-forum.org > > > > >> https://lists.mpi-forum.org/mailman/listinfo/mpiwg-large-counts > > > > >> > > > > > > > > > > > > > > > -- > > > > > Jeff Hammond > > > > > jeff.science(a)gmail.com > > > > > http://jeffhammond.github.io/ > > > > > > > > -- > > > > Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de > > . > > > > High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . > > > > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . > > > > Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner > > . > > > > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . > > > > > > > > > > > > > > > > > > -- > > > Jeff Hammond > > > jeff.science(a)gmail.com > > > http://jeffhammond.github.io/ > > > > -- > > Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de . > > High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . > > University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . > > Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner . > > Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) . > > > > > -- > Jeff Hammond > jeff.science(a)gmail.com > http://jeffhammond.github.io/ -- Dr. Rolf Rabenseifner . . . . . . . . . .. email rabenseifner(a)hlrs.de . High Performance Computing Center (HLRS) . phone ++49(0)711/685-65530 . University of Stuttgart . . . . . . . . .. fax ++49(0)711 / 685-65832 . Head of Dpmt Parallel Computing . . . www.hlrs.de/people/rabenseifner . Nobelstr. 19, D-70550 Stuttgart, Germany . . . . (Office: Room 1.307) .

1 0