June 2008 - Mpi3-subsetting - mailman3.cels.anl.gov

Sunset WG slides
by unknown＠example.com 30 Jun '08

30 Jun '08

I have read the slides and have some comments on the issues related to MPI_INIT time assertions (slide 4). 1) I agree the set of assertions must be negotiated but unanimous implementor acceptance should not be needed. Defining a assertion in the standard that does not help a particular MPI implementation is pretty harmless. Defining one that does not help any implementation is useless. Implementors are in a good position to recognize assertions that can never be useful and help kill them but no implementor should have veto power.. 2) I have not heard a decent rationale for implementation specific assertions. Assertions are not about the implementation. They are about a particular application and its requirements in relation to the MPI standard. The MPI implementation simply ignores any assertion that is not useful to optimizing that implementation. 3) a) Any tool that intercepts variants of MPI_INIT can remove assertions it does not like. Removing an assertion can never make an application quit working properly. b) I am not sure what "Layered underlying libraries" means but the observation on the slide does apply to what I would call "third party libraries". If some library that will be linked into an application (say a parallel math library) makes calls to MPI_Cancel for ISEND requests than that library should check that the MPI_NO_SEND_CANCEL assertion was not used and bail out if it was. Dick Dick Treumann - MPI Team/TCEM IBM Systems & Technology Group Dept 0lva / MS P963 -- 2455 South Road -- Poughkeepsie, NY 12601 Tele (845) 433-7846 Fax (845) 433-8363 "Supalov, Alexander" <alexander.supalo To v_at_[hidden]> "MPI 3.0 Sub-setting working group" Sent by: <mpi3-subsetting_at_lists.mpi-forum.or mpi3-subsetting-b g> ounces_at_lists.mpi- cc forum.org Subject Re: [Mpi3-subsetting] call for a 06/27/2008 08:55 report-out and session chair AM Please respond to "MPI 3.0 Sub-setting working group" <mpi3-subsetting@ lists.mpi-forum.o rg> Hi everybody, Rich Graham kindly agreed to chair the subsetting meeting for us. A draft report-out can be found in http://svn.mpi-forum.org/trac/mpi-forum-web/attachment/wiki/SubsettingWikiP… . I have to use a change-protected PDF for this external publication. Please comment. I've also added last meeting minutes, and am setting about updating the proposal accordingly now. Best regards. Alexander From: Supalov, Alexander Sent: Thursday, June 26, 2008 5:36 PM To: 'MPI 3.0 Sub-setting working group' Subject: call for a report-out and session chair Hi everybody, As I won't be at the meeting next week, we need a volunteer to report out to the Forum and then chair the subsetting WG meeting 5:15 pm - 7:00 pm on Tuesday, June 1. Who wants to do this? Please let me know. In the meantime, I'll prepare and upload a draft report-out, and update the current proposal using the materials of our recent meeting by EOW. Best regards. Alexander -- Dr Alexander Supalov Intel GmbH Hermuelheimer Strasse 8a 50321 Bruehl, Germany Phone: +49 2232 209034 Mobile: +49 173 511 8735 Fax: +49 2232 209029 --------------------------------------------------------------------- Intel GmbH Dornacher Strasse 1 85622 Feldkirchen/Muenchen Germany Sitz der Gesellschaft: Feldkirchen bei Muenchen Geschaeftsfuehrer: Douglas Lusk, Peter Gleissner, Hannes Schwaderer Registergericht: Muenchen HRB 47456 Ust.-IdNr. VAT Registration No.: DE129385895 Citibank Frankfurt (BLZ 502 109 00) 600119052 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. _______________________________________________ mpi3-subsetting mailing list mpi3-subsetting_at_[hidden] http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi3-subsetting *

1 0

Re: [Mpi3-subsetting] call for a report-out and session chair
by unknown＠example.com 27 Jun '08

27 Jun '08

Hi everybody, Rich Graham kindly agreed to chair the subsetting meeting for us. A draft report-out can be found in http://svn.mpi-forum.org/trac/mpi-forum-web/attachment/wiki/SubsettingWi kiPage/MPI-3%20subsetting%2C%20take%203.pdf . I have to use a change-protected PDF for this external publication. Please comment. I've also added last meeting minutes, and am setting about updating the proposal accordingly now. Best regards. Alexander ________________________________ From: Supalov, Alexander Sent: Thursday, June 26, 2008 5:36 PM To: 'MPI 3.0 Sub-setting working group' Subject: call for a report-out and session chair Hi everybody, As I won't be at the meeting next week, we need a volunteer to report out to the Forum and then chair the subsetting WG meeting 5:15 pm - 7:00 pm on Tuesday, June 1. Who wants to do this? Please let me know. In the meantime, I'll prepare and upload a draft report-out, and update the current proposal using the materials of our recent meeting by EOW. Best regards. Alexander -- Dr Alexander Supalov Intel GmbH Hermuelheimer Strasse 8a 50321 Bruehl, Germany Phone: +49 2232 209034 Mobile: +49 173 511 8735 Fax: +49 2232 209029 --------------------------------------------------------------------- Intel GmbH Dornacher Strasse 1 85622 Feldkirchen/Muenchen Germany Sitz der Gesellschaft: Feldkirchen bei Muenchen Geschaeftsfuehrer: Douglas Lusk, Peter Gleissner, Hannes Schwaderer Registergericht: Muenchen HRB 47456 Ust.-IdNr. VAT Registration No.: DE129385895 Citibank Frankfurt (BLZ 502 109 00) 600119052 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. *

1 0

call for a report-out and session chair
by unknown＠example.com 26 Jun '08

26 Jun '08

Hi everybody, As I won't be at the meeting next week, we need a volunteer to report out to the Forum and then chair the subsetting WG meeting 5:15 pm - 7:00 pm on Tuesday, June 1. Who wants to do this? Please let me know. In the meantime, I'll prepare and upload a draft report-out, and update the current proposal using the materials of our recent meeting by EOW. Best regards. Alexander -- Dr Alexander Supalov Intel GmbH Hermuelheimer Strasse 8a 50321 Bruehl, Germany Phone: +49 2232 209034 Mobile: +49 173 511 8735 Fax: +49 2232 209029 --------------------------------------------------------------------- Intel GmbH Dornacher Strasse 1 85622 Feldkirchen/Muenchen Germany Sitz der Gesellschaft: Feldkirchen bei Muenchen Geschaeftsfuehrer: Douglas Lusk, Peter Gleissner, Hannes Schwaderer Registergericht: Muenchen HRB 47456 Ust.-IdNr. VAT Registration No.: DE129385895 Citibank Frankfurt (BLZ 502 109 00) 600119052 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. *

1 0

Re: [Mpi3-subsetting] MPI subsetting: charting the way forward atatelecon next week?
by unknown＠example.com 20 Jun '08

20 Jun '08

I am not completely happy with the name format I have suggested for assertions. I would be glad to hear suggestions. Here is how I would cast each assertion. MPI_NO_EAGER_THROTTLE: This program does not depend on libmpi to provide an EAGER_THROTTLE semantic MPI_NO_REDUCTION_DETERMINISM This program does not depend on libmpi to provide a REDUCTION_DETERMINISM semantic MPI_NO_DATATYPE_HETEROGENEITY This program does not depend on libmpi to provide support for DATATYPE_HETEROGENEITY in communication MPI_NO_SEND_CANCEL This program does not depend on libmpi to provide a SEND_CANCEL semantic MPI_NO_ANY_SOURCE This program does not depend on libmpi to provide an ANY_SOURCE semantic MPI_NO_MPI_IO This program does not depend on libmpi to provide MPI_IO support etc In each case we are talking about something the MPI standard says must be provided by a compilant MPI implementation, just in case the application needs it. For each case there are application sthat do not need it. Does this help? Dick Treumann - MPI Team/TCEM IBM Systems & Technology Group Dept 0lva / MS P963 -- 2455 South Road -- Poughkeepsie, NY 12601 Tele (845) 433-7846 Fax (845) 433-8363

1 0

Re: [Mpi3-subsetting] MPI subsetting: charting the way forward atatelecon next week?
by unknown＠example.com 20 Jun '08

20 Jun '08

If an application has unpredictable behavior then it should not make assertions. The author of an application that loads arbitrary helpers at run time (like the "new physics module") should know that he cannot safely make assertions that cover those helpers. No application or helper can possibly "require an assertion". Zero assertions is valid for any correct MPI program. I think almost all the value of assertions is lost if the MPI implementation must be prepared at all times to have any assertion revoked. Dick Treumann - MPI Team/TCEM IBM Systems & Technology Group Dept 0lva / MS P963 -- 2455 South Road -- Poughkeepsie, NY 12601 Tele (845) 433-7846 Fax (845) 433-8363 mpi3-subsetting-bounces_at_[hidden] wrote on 06/20/2008 01:42:34 PM: > At 10:12 AM 6/20/2008, Richard Treumann wrote: > Of course - > > An assertion is a statement that the application does not require > some MPI standard feature or semantic guarantee. It is not a > directive to the MPI implementation. The implementation is free to > provide that feature or guarantee even if the application says it is > not needed. > > The story is a bit different for a helper library because the > library is logically a more or less opaque part of the application. > If the caller of MPI_INIT_ASSERTED says the application does not > require something and then uses a library that does require that > feature or guarantee - the library must raise an error or adjust its > behavior to live within the assertion. > > While I understand the intention, am a bit worried about the > implications. Imagine a long running application that loads > a new physics module after hours of computation and this new > module requires different assertions. If the only option it > has is to fail, a lot of progress in the main application will > get lost. The only alternative is for the application to never > state any assertion since it does not know which modules it > will load (often depends on the input deck) - and then the > whole exercise will be pointless anyway. > > Also, tools often need very specific MPI features and can't live > with many assertions (just taking from Rich's examples in the > other emails: there is often a need to use wildcards or complex > datatypes even if the application doesn't use it). Not being > able to change this would basically eliminate the ability to > use certain tools on certain applications (I realize that tools > that run from the beginning can intercept MPI_Init and turn > assertions off, but tools that attach can't). > > Hence, I think we need some way to change assertions at runtime > (at very specific points only and as global operations) despite > the extra complexity it will introduce. > > Martin > > > > > > Dick Treumann - MPI Team/TCEM > IBM Systems & Technology Group > Dept 0lva / MS P963 -- 2455 South Road -- Poughkeepsie, NY 12601 > Tele (845) 433-7846 Fax (845) 433-8363 > > > mpi3-subsetting-bounces_at_[hidden] wrote on 06/20/2008 12:58:03 PM: > > > Hi, > > > > Ignoring an assertion should be perfectly legal. > > > > Best regards. > > > _______________________________________________ > mpi3-subsetting mailing list > mpi3-subsetting_at_[hidden] > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi3-subsetting > _______________________________________________________________________ > Martin Schulz, schulzm_at_[hidden], http://people.llnl.gov/schulz6 > CASC @ Lawrence Livermore National Laboratory, Livermore, USA > _______________________________________________ > mpi3-subsetting mailing list > mpi3-subsetting_at_[hidden] > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi3-subsetting *

1 0

Re: [Mpi3-subsetting] MPI subsetting: charting the way forward atatelecon next week?
by unknown＠example.com 20 Jun '08

20 Jun '08

We may be talking across past each other - MPI_NO_EAGER_THROTTLE seems to me to be a statement about the MPI implementation, not the application, and thus does not fit the test of being an assertion on the application. I guess you could say that the application is asking for the library to respect this request, but this assumes this means something to all implementations. If we are going to put things into the standard that mean something in some implementations, and not in others, we have to have a way for every implementation to add assertions that are meaningful to them, and can¹t just pick a set that fits a sub-set of implementations, and as such need mechanisms for adding new parameters, and querying which ones are supported. Rich On 6/20/08 1:45 PM, "Richard Treumann" <treumann_at_[hidden]> wrote: > Since an assertion is a statement about the application, made by the > application, I see no need for a query system that preceeds making the > assertion. If the application author is confident enough about the way his > application works to make one of the few predefined assertions, it can never > do any harm to make the assertion. > > If he wants to experiment, he can use the query function within the > application to find out if the assertion he made is being exploited by the MPI > implementation. If the query function says the assertion is not being > exploited then it is harmless. If the query function says it is being > exploited then the application author can try his application with and without > the assertion to see if the payoff is noticable. If he is the cautious type he > can put in a query and issue a warning for any MPI implementation that > exploits the assertion. The warning would say "Additional testing may be > required". When he changes or upgrades his MPI and the new MPI implementation > does exploit the assertion he will be warned. > > I think if there are more than a very few assertions available, the third > party libraries will simply take the defensive actions of disallowing all > assertions. If there are a very few will defined assertions, third party > libraries can decide which ones to allow. > > If there are a small number of predefined assertion there is no reason the > standard could not say which bit each one uses. If the standard said > MPI_NO_EAGER_THROTTLE was to be 0x01 there would be no ABI issue. > > > Dick Treumann - MPI Team/TCEM > IBM Systems & Technology Group > Dept 0lva / MS P963 -- 2455 South Road -- Poughkeepsie, NY 12601 > Tele (845) 433-7846 Fax (845) 433-8363 > > > mpi3-subsetting-bounces_at_[hidden] wrote on 06/20/2008 01:05:03 PM: > >> > >> > Yes, but the best approach would be a query/subscribe >> > interface, possibly with some set of standard ketwords >> > that provide portability. >> > > > > _______________________________________________ > mpi3-subsetting mailing list > mpi3-subsetting_at_[hidden] > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi3-subsetting *

1 0

Re: [Mpi3-subsetting] MPI subsetting: charting the way forward atatelecon next week?
by unknown＠example.com 20 Jun '08

20 Jun '08

Hi Martin Assertions are not MPI implementation specific. There are features of the MPI standard and semantic guarantees of the MPI standard that a few applications depend on and many do not. Some of these standard MPI features are costly in memory footprint or damage performance. A program author will be able to use a predefined assertion to declare that this application does not require a specific feature. The MPI implementation is then free to use optimizations that are not allowable if the feature or guarantee must be maintained just in case it is needed. It may not be simple to explain the meaning of each assertion but the meaning is 100% rooted in the MPI standard and is not different from one implementation to the next. Dick Treumann - MPI Team/TCEM IBM Systems & Technology Group Dept 0lva / MS P963 -- 2455 South Road -- Poughkeepsie, NY 12601 Tele (845) 433-7846 Fax (845) 433-8363 <snip> > ............. Also, if these constants > are really implementation specific, does it make sense to have > them in the MPI standard? Each vender will want their own set > (and rightfully so) and the burden is then on the programmer to > know all of the different options and understand the subtle > differences (and we have to document them all in the standard). <snip> > > Martin > <snip> *

1 0

Re: [Mpi3-subsetting] MPI subsetting: charting the way forward atatelecon next week?
by unknown＠example.com 20 Jun '08

20 Jun '08

Since an assertion is a statement about the application, made by the application, I see no need for a query system that preceeds making the assertion. If the application author is confident enough about the way his application works to make one of the few predefined assertions, it can never do any harm to make the assertion. If he wants to experiment, he can use the query function within the application to find out if the assertion he made is being exploited by the MPI implementation. If the query function says the assertion is not being exploited then it is harmless. If the query function says it is being exploited then the application author can try his application with and without the assertion to see if the payoff is noticable. If he is the cautious type he can put in a query and issue a warning for any MPI implementation that exploits the assertion. The warning would say "Additional testing may be required". When he changes or upgrades his MPI and the new MPI implementation does exploit the assertion he will be warned. I think if there are more than a very few assertions available, the third party libraries will simply take the defensive actions of disallowing all assertions. If there are a very few will defined assertions, third party libraries can decide which ones to allow. If there are a small number of predefined assertion there is no reason the standard could not say which bit each one uses. If the standard said MPI_NO_EAGER_THROTTLE was to be 0x01 there would be no ABI issue. Dick Treumann - MPI Team/TCEM IBM Systems & Technology Group Dept 0lva / MS P963 -- 2455 South Road -- Poughkeepsie, NY 12601 Tele (845) 433-7846 Fax (845) 433-8363 mpi3-subsetting-bounces_at_[hidden] wrote on 06/20/2008 01:05:03 PM: > > Yes, but the best approach would be a query/subscribe > interface, possibly with some set of standard ketwords > that provide portability. > *

1 0

Re: [Mpi3-subsetting] MPI subsetting: charting the way forward atatelecon next week?
by unknown＠example.com 20 Jun '08

20 Jun '08

At 10:12 AM 6/20/2008, Richard Treumann wrote: >Of course - > >An assertion is a statement that the application does not require >some MPI standard feature or semantic guarantee. It is not a >directive to the MPI implementation. The implementation is free to >provide that feature or guarantee even if the application says it is >not needed. > >The story is a bit different for a helper library because the >library is logically a more or less opaque part of the application. >If the caller of MPI_INIT_ASSERTED says the application does not >require something and then uses a library that does require that >feature or guarantee - the library must raise an error or adjust its >behavior to live within the assertion. While I understand the intention, am a bit worried about the implications. Imagine a long running application that loads a new physics module after hours of computation and this new module requires different assertions. If the only option it has is to fail, a lot of progress in the main application will get lost. The only alternative is for the application to never state any assertion since it does not know which modules it will load (often depends on the input deck) - and then the whole exercise will be pointless anyway. Also, tools often need very specific MPI features and can't live with many assertions (just taking from Rich's examples in the other emails: there is often a need to use wildcards or complex datatypes even if the application doesn't use it). Not being able to change this would basically eliminate the ability to use certain tools on certain applications (I realize that tools that run from the beginning can intercept MPI_Init and turn assertions off, but tools that attach can't). Hence, I think we need some way to change assertions at runtime (at very specific points only and as global operations) despite the extra complexity it will introduce. Martin >Dick Treumann - MPI Team/TCEM >IBM Systems & Technology Group >Dept 0lva / MS P963 -- 2455 South Road -- Poughkeepsie, NY 12601 >Tele (845) 433-7846 Fax (845) 433-8363 > > >mpi3-subsetting-bounces_at_[hidden] wrote on 06/20/2008 12:58:03 PM: > > > Hi, > > > > Ignoring an assertion should be perfectly legal. > > > > Best regards. > > >_______________________________________________ >mpi3-subsetting mailing list >mpi3-subsetting_at_[hidden] >http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi3-subsetting _______________________________________________________________________ Martin Schulz, schulzm_at_[hidden], http://people.llnl.gov/schulz6 CASC @ Lawrence Livermore National Laboratory, Livermore, USA *

1 0

Re: [Mpi3-subsetting] MPI subsetting: charting the way forwardatatelecon next week?
by unknown＠example.com 20 Jun '08

20 Jun '08

An mpi_int is potentially asking for trouble. If this allow for 32 different parameters, this is far too limited. If it allows for 2^32 values, I hope we can¹t come up with that many restrictions. Back to the assertion issue. In the context of an ABI (if this becomes a reality), it does not make much sense to standardize on things that are not standard, but stick to items that are defined within the standard, such as ³I will not use wild card receives² (I am not advocating that one at all, just using it as an example), ³I will only use basic MPI types², ... For things that are not standard, such as ³no-eager-throttle², it would make sense to me to have a standard way for implementations to expose which ones the support, where their meaning is defined, and how a user would invoke these  at mpi_init, via mpi_int_?, or some other way. Rich On 6/20/08 1:14 PM, "Supalov, Alexander" <alexander.supalov_at_[hidden]> wrote: > Why make it difficult when an int in the mpi_init call seems to be > sufficient? > > -----Original Message----- > From: mpi3-subsetting-bounces_at_[hidden] > [mailto:mpi3-subsetting-bounces_at_[hidden]] On Behalf Of Bronis > R. de Supinski > Sent: Friday, June 20, 2008 7:05 PM > To: MPI 3.0 Sub-setting working group > Subject: Re: [Mpi3-subsetting] MPI subsetting: charting the way forward > atatelecon next week? > > > Yes, but the best approach would be a query/subscribe > interface, possibly with some set of standard ketwords > that provide portability. > > On Fri, 20 Jun 2008, Supalov, Alexander wrote: > >> > Hi, >> > >> > Ignoring an assertion should be perfectly legal. >> > >> > Best regards. >> > >> > Alexander >> > >> > ________________________________ >> > >> > From: mpi3-subsetting-bounces_at_[hidden] >> > [mailto:mpi3-subsetting-bounces_at_[hidden]] On Behalf Of >> > Richard Graham >> > Sent: Friday, June 20, 2008 6:53 PM >> > To: MPI 3.0 Sub-setting working group >> > Subject: Re: [Mpi3-subsetting] MPI subsetting: charting the way > forward >> > atatelecon next week? >> > >> > >> > I think we need to be careful here when it comes to assertions, and >> > think hard about how >> > you want to handle these in a standard. In some of the > implementations >> > I am familiar with >> > a no-eager-throttle key word would be useless - it is vey >> > implementation specific. I suppose >> > this is a big problem with trying to add implementation specific >> > keywords to a standard. >> > It is a given that this will also cause trouble when trying to come > up >> > with an ABI, unless >> > one has a large set of defined constants, and are willing to have > these >> > be no-ops in >> > certain implementations. >> > >> > Rich >> > >> > >> > On 6/20/08 9:56 AM, "Richard Treumann" <treumann_at_[hidden]> wrote: >> > >> > >> > >> > Hi Alexander >> > >> > Comments imbedded below. >> > >> > I have no objections to someone providing a rationale for >> > assertions related to MPI-IO and MPI_1sided. If the rationale is > sound >> > I have no objection to putting them in the proposal. >> > >> > I feel the proposal should be evaluated by the following >> > algorithm. >> > >> > If (this concept is one that seems plausible) { >> > for each proposed assertion { >> > if (rationale not solid) >> > discard >> > if (deal breaker downside) >> > discard >> > } >> > if ((concept makes sense) & (set of worthwhile assertions is not >> > empty)) >> > make this part of MPI 2.2 >> > >> > I do not see much reason to get every assertion that eventually >> > gains traction into MPI 2.2. MPI 3.0 is soon enough for any that do > not >> > make the MPI 2.2 cut. I do not want to see the concept fall because > some >> > particular assertion is controversial. >> > >> > I consider MPI_NO_EAGER_THROTTLE to be the single most valuable >> > assertion for MPI 2.2 because it is needed to allow MPI to scale to > the >> > levels we are already seeing. >> > >> > >> > Dick Treumann - MPI Team/TCEM >> > IBM Systems & Technology Group >> > Dept 0lva / MS P963 -- 2455 South Road -- Poughkeepsie, NY 12601 >> > Tele (845) 433-7846 Fax (845) 433-8363 >> > >> > >> > mpi3-subsetting-bounces_at_[hidden] wrote on 06/20/2008 >> > 02:58:41 AM: >> > >>> > > Dear Dick, >>> > > >>> > > A couple of suggestions re your proposal: >>> > > >>> > > - If ASSERTIONS is put at the end of the MPI_INIT_ASSERTED >> > argument >>> > > list, in C++ one can declare the last argument as having a >> > zero >>> > > default value, and skip it if necessary. This might help with >>> > > deprecation of the earlier MPI_INIT_* calls. >> > >> > I have no objection. It seems reasonable to let C++ default the >> > assertions parameter to "none" >> > >>> > > - In non-Cray parts of the world, an MPI_INT followed by >> > MPI_FLOAT >>> > > is likely to be a 4-byte int followed by a 4-byte float. This >>> > > sometimes depends on the compiler settings in effect, too. >> > >> > My rationale is not specific to any particular architecture. >> > Some MPI datatypes are made entirely >> > from the same base type. Some are mixtures of types. If libmpi >> > knows >> > at the moment a datatype is committed that the send side and >> > receive >> > side will always use the same internal representions then it >> > does not >> > need to keep track of the fact that one instance of >> > {MPI_INT,MPI_FLOAT} >> > has two distinct parts. The send side can gather and ship 8 >> > bytes >> > and the receive side can scatter the 8 bytes. If one side might >> > use 4 >> > byte integers while the other side uses 8 byte integers then at >> > least one side will need to know there is a conversion to be >> > done for >> > the MPI_INT part. If an MPI job does a spawn or join that links >> > to a >> > different architecture after the datatype has been committed, >> > and >> > the MPI_Type_commit has discarded the details, it is too late to >> > get >> > them back. On the other hand, if it is known there will never >> > be a >> > different architecture added to the job, the extra information >> > can be >> > safely discarded. >> > >>> > > - I don't think MPI_NO_THREAD_CONTENTION is really necessary. >> > The >>> > > original thread level settings, in particular, the use of >> > anything >>> > > but MPI_THREAD_MULTIPLE, seem to capture the semantics that >> > you proposed. >> > >> > This one is kind of tricky and I also am not sure what it would >> > mean. If >> > we find a clear value we can keep it and if not we can remove >> > it. >> > >>> > > - I can't fully follow the motivation for MPI_NO_ANY_SOURCE >>> > > deprioritization. AFAIK, a rendezvous exchange usually starts >> > with a >>> > > ready-to-send packet that contains the size of the message. In >> > this >>> > > case the receiving side will normally reply with a >> > ready-to-receive >>> > > regardless of the buffer space available, and flag >> > MPI_ERR_TRUNCATED >>> > > on message arrival if necessary. In this case, neither >>> > > MPI_ANY_SOURCE not MPI_NO_ANY_SOURCE seem to get into way. >> > >> > My point is that MPI_NO_ANY_SOURCE might allow this round trip >> > protocol to be replaced by a 1/2 rendezvous protocol. If it is >> > known >> > that MPI_ANY_SOURCE will not be used then the receive side can >> > send >> > an "envelop and ready for data" packet to the send side. As long >> > as >> > the send side knows it will receive the "envelop and ready for >> > data" >> > packet when the receive is posted, it does not need to do the >> > first 1/2 >> > of the rendezvous. The message matching can be done at the send >> > side. >> > >> > A send for which the receive was preposted has a >> > good chance of finding the "envelop and ready for data" sitting >> > in >> > an early queue and the large send can avoid any rendezvous >> > delay. >> > Data begins to flow immediately vs waiting for a round trip of a >> > >> > full rendezvous. In many cases we cut the delay in half and best >> > >> > case we eliminate rendezvous delay completely. If the receive >> > side >> > is late in posting the receive we still save a packet traversal >> > but >> > do not save any time. >> > >> > If there may be an MPI_ANY_SOURCE then this does not work >> > because the >> > receive side that has an MPI_ANY_SOURCE cannot guess which >> > sender to >> > notify so the sender cannot count on getting a 1/2 rendezvous >> > notification for a message that should match the MPI_ANY_SOURCE >> > receive. >> > >> > The problem that made me lower the priority is that many MPIs >> > use an >> > eager protocol for small messages and a rendezvous protocol for >> > large >> > messages. If the send side and receive side have the same size >> > buffer >> > then both sides can reach the same conclusion: eager vs 1/2 >> > rendezvous. >> > If both decide on eager, the receive side will not send an >> > "envelop and ready for data" packet and the send side will not >> > look >> > for one. If both sides decide on 1/2 rendezvous then the receive >> > side >> > will send an "envelop and ready for data" packet and the send >> > side will >> > look for and consume the notice. If the send side is for an 8 >> > byte >> > message and the receive uses a "big enough" receive buffer of >> > 64KB >> > then the two sides will probably not be able to reach the same >> > conclusion about the protocol. The receive side will ship off an >> > "envelop and ready for data" packet that the send side will not >> > know what to do with. >> > >> > >>> > > >>> > > Best regards. >>> > > >>> > > Alexander >>> > > >>> > > From: Supalov, Alexander >>> > > Sent: Friday, June 20, 2008 8:29 AM >>> > > To: 'MPI 3.0 Sub-setting working group' >>> > > Subject: RE: [Mpi3-subsetting] MPI subsetting: charting the >> > way >>> > > forward at atelecon next week? >> > >>> > > Dear Dick, >>> > > >>> > > Thank you. I remember we exchanged a couple of emails about >> > the >>> > > possible extensions to the set of assertions, like one-sided >> > and >>> > > I/O, and in my recollection, almost reached an agreement that >> > this >>> > > can improve performance and possibly memory footprint, as well >> > as be >>> > > expressed thru assertions. Do you still feel favorable about >> > this? >>> > > >>> > > Best regards. >>> > > >>> > > Alexander >>> > > >> > >> > >> > >> > ________________________________ >> > >> > _______________________________________________ >> > mpi3-subsetting mailing list >> > mpi3-subsetting_at_[hidden] >> > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi3-subsetting >> > >> > >> > >> > >> > --------------------------------------------------------------------- >> > Intel GmbH >> > Dornacher Strasse 1 >> > 85622 Feldkirchen/Muenchen Germany >> > Sitz der Gesellschaft: Feldkirchen bei Muenchen >> > Geschaeftsfuehrer: Douglas Lusk, Peter Gleissner, Hannes Schwaderer >> > Registergericht: Muenchen HRB 47456 Ust.-IdNr. >> > VAT Registration No.: DE129385895 >> > Citibank Frankfurt (BLZ 502 109 00) 600119052 >> > >> > This e-mail and any attachments may contain confidential material for >> > the sole use of the intended recipient(s). Any review or distribution >> > by others is strictly prohibited. If you are not the intended >> > recipient, please contact the sender and delete all copies. >> > > _______________________________________________ > mpi3-subsetting mailing list > mpi3-subsetting_at_[hidden] > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi3-subsetting > --------------------------------------------------------------------- > Intel GmbH > Dornacher Strasse 1 > 85622 Feldkirchen/Muenchen Germany > Sitz der Gesellschaft: Feldkirchen bei Muenchen > Geschaeftsfuehrer: Douglas Lusk, Peter Gleissner, Hannes Schwaderer > Registergericht: Muenchen HRB 47456 Ust.-IdNr. > VAT Registration No.: DE129385895 > Citibank Frankfurt (BLZ 502 109 00) 600119052 > > This e-mail and any attachments may contain confidential material for > the sole use of the intended recipient(s). Any review or distribution > by others is strictly prohibited. If you are not the intended > recipient, please contact the sender and delete all copies. > > > _______________________________________________ > mpi3-subsetting mailing list > mpi3-subsetting_at_[hidden] > http://lists.mpi-forum.org/mailman/listinfo.cgi/mpi3-subsetting > *

1 0