This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "MPICH primary repository". The branch, master has been updated via 1cc4f6db6996f4e8c824743e878cef59dee74a11 (commit) from 4e5f84a5b7e3475a5c4db19bd0f4272fdae1e850 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://git.mpich.org/mpich.git/commitdiff/1cc4f6db6996f4e8c824743e878cef59de... commit 1cc4f6db6996f4e8c824743e878cef59dee74a11 Author: Pavan Balaji <[email protected]> Date: Wed Apr 23 11:10:27 2014 -0500 Update documentation to reflect the change to --disable-fortran. No reviewer. diff --git a/README.vin b/README.vin index a298090..a7859ff 100644 --- a/README.vin +++ b/README.vin @@ -50,18 +50,11 @@ shared memory), Hydra process management) of MPICH up and running. --disable-cxx (configuring MPICH is described in step 1(d) below). - - OPTIONAL: A Fortran 77 compiler, if Fortran 77 applications are - to be used (gfortran, ifort, etc.). If you do not require - support for Fortran 77 applications, you can disable this - support using --disable-f77 (configuring MPICH is described in - step 1(d) below). - - - OPTIONAL: A Fortran 90 compiler, if Fortran 90 applications are - to be used (gfortran, ifort, etc.). If you do not require - support for Fortran 90 applications, you can disable this - support using --disable-fc. Note that Fortran 77 support is a - prerequisite for Fortran 90 support (configuring MPICH is - described in step 1(d) below). + - OPTIONAL: A Fortran compiler, if Fortran applications are to be + used (gfortran, ifort, etc.). If you do not require support for + Fortran applications, you can disable this support using + --disable-fortran (configuring MPICH is described in step 1(d) + below). Also, you need to know what shell you are using since different shell has different command syntax. Command "echo $SHELL" prints out the @@ -100,11 +93,11 @@ shared memory), Hydra process management) of MPICH up and running. command will display the error. Most errors are straight-forward to follow. For example, if the configure command fails with: - "No Fortran 77 compiler found. If you don't need to build any + "No Fortran compiler found. If you don't need to build any Fortran programs, you can disable Fortran support using - --disable-f77 and --disable-fc. If you do want to build - Fortran programs, you need to install a Fortran compiler such - as gfortran or ifort before you can proceed." + --disable-fortran. If you do want to build Fortran programs, + you need to install a Fortran compiler such as gfortran or + ifort before you can proceed." ... it means that you don't have a Fortran compiler :-). You will need to either install one, or disable Fortran support in MPICH. @@ -305,10 +298,10 @@ developers might be interested in, but which break existing configure tests (e.g., -Werror). These are NOT recommended for regular users. (d) MPICH_MPICC_FLAGS, MPICH_MPICPP_FLAGS, MPICH_MPICXX_FLAGS, -MPICH_MPIF77_FLAGS, MPICH_MPIFC_FLAGS, MPICH_LDFLAGS and -MPICH_LIBS (abbreviated as MPICH_MPIX_FLAGS): These flags do *not* -affect the compilation of the MPICH library itself, but will be -internally used by mpicc and friends. +MPICH_MPIFC_FLAGS, MPICH_LDFLAGS and MPICH_LIBS (abbreviated as +MPICH_MPIX_FLAGS): These flags do *not* affect the compilation of the +MPICH library itself, but will be internally used by mpicc and +friends. +--------------------------------------------------------------------+ @@ -500,8 +493,8 @@ configurations: --with-cross=<mpich-source>/src/mpid/ch3/channels/nemesis/netmod/ib/cross_values.txt --host=x86_64-k1om-linux --with-ib=/opt/intel/mic/ofed/card/usr - CC=icc CXX=icpc F77=ifort FC=ifort - CFLAGS=-mmic CXXFLAGS=-mmic FFLAGS=-mmic FCFLAGS=-mmic LDFLAGS=-mmic + CC=icc CXX=icpc FC=ifort + CFLAGS=-mmic CXXFLAGS=-mmic FCFLAGS=-mmic LDFLAGS=-mmic 3. InfiniBand Open Fabrics, Xeon Phi, McKernel (developed by University of Tokyo) @@ -513,8 +506,8 @@ configurations: --host=x86_64-k1om-linux --with-ib=<mckernel-source>/attached --disable-shared - CC=icc CXX=icpc F77=ifort FC=ifort - CFLAGS=-mmic CXXFLAGS=-mmic FFLAGS=-mmic FCFLAGS=-mmic LDFLAGS=-mmic + CC=icc CXX=icpc FC=ifort + CFLAGS=-mmic CXXFLAGS=-mmic FCFLAGS=-mmic LDFLAGS=-mmic Note that shared builds are not supported for the third configuration right now. @@ -760,7 +753,7 @@ http://wiki.mpich.org/mpich/index.php/Getting_And_Building_MPICH If the C compiler that is used to build MPICH libraries supports both multiple weak symbols and multiple aliases of common symbols, the -Fortran 77 binding can support multiple Fortran compilers. The +Fortran binding can support multiple Fortran compilers. The multiple weak symbols support allow MPICH to provide different name mangling scheme (of subroutine names) required by differen Fortran compilers. The multiple aliases of common symbols support enables @@ -775,20 +768,19 @@ e.g. linker warnings of different sizes of common symbols, MPIFCMB* (the warning should be harmless). We have only tested this support on a limited set of -platforms/compilers. On linux, if the C compiler that builds MPICH -is either gcc or icc, the above support will be enabled by configure. -At the time of this writing, pgcc does not seem to have this multiple +platforms/compilers. On linux, if the C compiler that builds MPICH is +either gcc or icc, the above support will be enabled by configure. At +the time of this writing, pgcc does not seem to have this multiple aliases of common symbols, so configure will detect the deficiency and disable the feature automatically. The tested Fortran compilers -include GNU Fortran compilers (gfortan), Intel Fortran -compiler (ifort), Portland Group Fortran compilers (pgf77, pgf90), -Absoft Fortran compilers (af77, af90), and IBM XL fortran -compiler (xlf). What this means is that if mpich is built by -gcc/gfortran, the resulting mpich library can be used to link a -Fortran program compiled/linked by another fortran compiler, say -pgf90, say through mpifort -fc=pgf90. As long as the Fortran program -is linked without any errors by one of these compilers, the program -shall be running fine. +include GNU Fortran compilers (gfortan), Intel Fortran compiler +(ifort), Portland Group Fortran compilers (pgfortran), Absoft Fortran +compilers (af90), and IBM XL fortran compiler (xlf). What this means +is that if mpich is built by gcc/gfortran, the resulting mpich library +can be used to link a Fortran program compiled/linked by another +fortran compiler, say pgf90, say through mpifort -fc=pgf90. As long +as the Fortran program is linked without any errors by one of these +compilers, the program shall be running fine. ------------------------------------------------------------------------- diff --git a/configure.ac b/configure.ac index 9593e68..8e1f4b5 100644 --- a/configure.ac +++ b/configure.ac @@ -1900,7 +1900,7 @@ if test "$enable_f77" = "yes" -a "$F77" = "no" ; then # No Fortran 77 compiler found; abort AC_MSG_ERROR([No Fortran 77 compiler found. If you don't need to build any Fortran programs, you can disable Fortran support using - --disable-f77 and --disable-fc. If you do want to build Fortran + --disable-fortran. If you do want to build Fortran programs, you need to install a Fortran compiler such as gfortran or ifort before you can proceed.]) fi @@ -1961,7 +1961,7 @@ information to configure with the FCFLAGS environment variable.]) # If Fortran implicitly enabled, disable it now. Otherwise, # abort the configure since warning messages are often lost in # the output. - AC_MSG_ERROR([Aborting configure because of mixed case names in Fortran. Either select --disable-f77 or set FFLAGS to force the compiler to select monocase names]) + AC_MSG_ERROR([Aborting configure because of mixed case names in Fortran. Either select --disable-fortran or set FCFLAGS to force the compiler to select monocase names]) fi # The MPI standard requires that MPI_Init in any language initialize @@ -2085,10 +2085,10 @@ if test "$enable_fc" = "yes" -a "$enable_f77" != "yes" ; then AC_MSG_ERROR([ Fortran 90 support requires compatible Fortran 77 support. To force the use of the Fortran 90 compiler for Fortran 77, -do not use configure option --disable-f77, and set the environment +do not use configure option --disable-fortran, and set the environment variable F77 to the name of the Fortran 90 compiler, or \$FC. If you do not want any Fortran support, use configure options ---disable-f77 and --disable-fc.]) +--disable-fortran.]) # We should probably do the compatibility test as well enable_f77=yes fi @@ -3965,7 +3965,7 @@ dnl len_doublecplx=$hexlen if grep HAVE_FINT_IS_INT $master_top_srcdir/src/binding/fortran/mpif_h/testf.c 2>&1 1>/dev/null ; then AC_MSG_WARN([Fortran integers and C ints are not the same size. Support for this case is experimental; use at your own risk]) else - AC_MSG_ERROR([Fortran integers and C ints are not the same size. The current Fortran binding does not support this case. Either force the Fortran compiler to use integers of $ac_cv_sizeof_int bytes, or use --disable-f77 on the configure line for MPICH.]) + AC_MSG_ERROR([Fortran integers and C ints are not the same size. The current Fortran binding does not support this case. Either force the Fortran compiler to use integers of $ac_cv_sizeof_int bytes, or use --disable-fortran on the configure line for MPICH.]) fi fi ----------------------------------------------------------------------- Summary of changes: README.vin | 66 +++++++++++++++++++++++++-------------------------------- configure.ac | 10 ++++---- 2 files changed, 34 insertions(+), 42 deletions(-) hooks/post-receive -- MPICH primary repository