Done. Ben

On Jul 5, 2016, at 3:37 PM, Brian R. Toonen <[email protected]> wrote:

BTW, there is a bug in the Mellanox drivers version 3.1 and above. The bug only is affected when both ports are wired and configured for IB. I've temporarily disabled IB traffic over the second port by setting the port to ethernet (using connectx_port_config), although it would probably be better if we pull the cable on the second port until Mellanox fixes the bug.

--brian

On 2016-07-05 13:33, Allen, Benjamin S. wrote:

...

This is complete. Including an updated firmware for the Mellanox HCA. Note this was a swap from RHEL's OFED to Mellanox's OFED 3.3-1.0.0.0. The latest firmware that I could find for this HP branded Mellanox ConnectX-2 HCA is 2.9.1530.

I also took this chance to run JLSE's full set of Ansible playbooks over Neurosis which brought it closer to what our current configurations are.

Some notables: overwrote /etc/yum.repos.d, sudoers, /etc/security/access.conf. For now I have sudoers and access.conf to allow anyone in the RAN group. It installed cpupower and get the governor to performance. Fixed rsyslog to forward logs. Updated a number of configuration to point at ftsn2 and ftsn3 instead of ftsn1 and ftsn2. Installed a handful of useful systems applications.

Let me know if there's anything that appears broken.

Ben

...

On Jul 5, 2016, at 12:49 PM, Allen, Benjamin S. <[email protected]> wrote:

Brian asked I installed / upgrade Mellanox OFED on Neurosis. Doing this now.

Ben

_______________________________________________ Neurosis mailing list [email protected] https://lists.jlse.anl.gov/mailman/listinfo/neurosis