Hi Bronis, all, Thanks for the extensive notes - they are now available on the Wiki. Martin At 09:00 AM 1/12/2009, Bronis R. de Supinski wrote:

All:

Here are my notes from today's telecon.

Participants:

Dong Ahn (LLNL) Chih-Ping Chen (Intel) John DelSignore (TotalView Tech) Bronis de Supinski (LLNL) Chris Gottbrath (TotalView Tech) Marty Itzkowitz (Sun) Bob Moench (Cray) Phil Roth (ORNL) Martin Schulz (LLNL) Jeff Squyres (Cisco)

Notes:

Chris has added stuff to the variables section and some other edits to the evolving MPIR document:

https:// svn.mpi-forum.org/trac/mpi-forum-web/wiki/MPI3Tools/mpir-current

For now, they are emphasized by being preceded by Chris's name.

Still need to clean up the document, as per John's email -- we need things like types for example. It is still pretty incomplete and has a lot of ambiguities. TotalView will try to fill it in since they have a lot of the historical knowledge of what has happened. They see lots of different implementations and styles for using the interface. That will help us understand what we what do going forward, including extending it for MPI-2 constructs like dynamic processes.

What form do we want to maintain the document in? The simplest thing is to leave it as a document on the Wiki. We will refer to that in the MPI-2.2 standard. The plan is to try to get a revised and improved interface into MPI-3. John's model is based on Dwarf -- have an author and an editor and a list of contributors; we probably don't need an editor given the shorter term nature of this document. John will try to come up with a Word document that captures the historical perspective. We could use the MPI subversion repo. The revised plan is that John will get an initial draft together, either as a text document or in Word and then Martin will transform it into LaTex using the MPI standard style sheets. John will check with his management in order to determine the time frame in which it can be completed. He esitmates a month or two. The overall goal is to have the final version done by the time MPI-2.2 is fully approved (September 2009?).

Chris presented the Euro PVM/MPI paper on their proposal. The paper can be accessed through this link:

http:// www. open-mpi.org/papers/euro-pvmmpi-2006-mpi2-debugging/euro-pvmmpi-2006-mpi2-debugging.pdf

Tis interface supports dynamic processes. It was also designed to handle large scales by allowing the proctable information to be distributed. Chris sent his slides to the tools list; someone will make sure they are made available on the Wiki.

Subset attach is an important consideration, as is the naming of nodes, which becomes more complicated with dynamic processes. Must support Spawn, Connect/Acept and Join. Overhead needs to be low enough that MPI can support it during normal job operations so that user can attach to a running job ("on by default").

Distributes the process table so debugger (may) need to reassemble it. Dong: Does this imply that debugging launching will be hierarchical? The process of the debugger beoming attached to processes may be multi-step, which may not need to imply hierarchical launching. Can the debugger use resource manager provided functionality to do bulk launching? Ability to distribute the proctable does not preclude the possibility of having a centralized table. It is important, perhaps even more important, to have the appropriate support in the runtime system, whether it is the MPI runtime or the job manager (the tool doesn't care where it lives as long as the facilities are there). Launching the servers, establishing communication and finding the topology of the machine is currently ad hoc. A good thing would be for the standard to encompass these aspects.

The goal should be to define an API and leave the implementation open. This is consistent with the MPI standard in general. It needs to be more of an abstraction that the tool calls for the information.

An original design constraint was that the interface cannot require the target to make progress. A DLL that the tool can load and call should be able to provide the needed abstractions. John thinks we may be going down the wrong path if we consider what Chris is presenting an interface since it might be easier not to require the table be distributed. The original interface had a problem in that it dictated the implementation a little too much.

Interface should give information on what the job looks like. John thinks it also should give services like spawning the daemons and establishing communication between them. That would provide an interface we could point at that would mean implementers can support their tools in a scalable fashion.

Chris's presentation provides a good implementation that can help us design the API that we need. Chris agrees that we do not yet have the API written down. MIght be useful to have two interfaces: one that targets a small scale system in which a central RM manages all the dynamic process operations and can store all of the information in one place; and one that is more scalable and supports the distributed table in the Euor PVM/MPI paper.

Synchronization is an important consideration -- allow user to debug job early in a well defined state.

Prcoess table entries -- probably things that need to be accessible through any API.

Process naming is an important consideration -- you want to have a notion of repeatable naming for scripting. If you run the program twice in the same way and it is deterministic then you should beable to interact with it through the debugger in the same way. With dynamic processes, there is no universal name space. There are several MPI_COMM_WORLDs; a notion of MPI_COMM_UNIVERSE would be useful but is not consistent with the design of MPI dynamic processes. Thus, a hierarchical naming scheme is probably necessary.

Different levels of notification -- user may want to know about all spawns but they might not. The notification mechanism should minimize the impact on MPI processes.

TotalView was developing an implementation in collaboration with MPICH and OpenMPI. TotalView did the first stages of its implementation (not completed but workable). No one has implemented it on the MPI side yet.

_______________________________________________ Mpi3-tools mailing list [email protected] http:// lists.mpi-forum.org/mailman/listinfo.cgi/mpi3-tools

_______________________________________________________________________ Martin Schulz, [email protected], http://people.llnl.gov/schulz6 CASC @ Lawrence Livermore National Laboratory, Livermore, USA