November 2015 - devel - mailman3.cels.anl.gov

Re: [mpich-devel] autogen.sh libtool version mismatch
by Kenneth Raffenetti 10 Nov '15

10 Nov '15

On 11/10/2015 11:46 AM, Rob Latham wrote: > > > On 11/10/2015 11:29 AM, Kenneth Raffenetti wrote: >> Looks to be specific to the 2.4.3 tarball, which has an unexpected >> LT_PACKAGE_VERSION (2.4.2.458.26-92994) in m4/ltversion.m4. We can >> either put in a workaround or just bump the requirement in the next >> release. >> >> Thanks for reporting. > > can you make 2.4.2.458.26-92994 the lowest working number or is that > string too goofy to easily parse? This was my thought as a workaround. Local tests indicate it will work. Either way, we'll jam in a fix after the release. Ken > > ==rob >> >> Ken >> >> On 11/10/2015 08:54 AM, Jeff Hammond wrote: >>> autogen.sh fails because it says I need "version 2.4.3 or higher >>> required", but I have version 2.4.3 (see below). i upgraded to 2.4.6 >>> and the problem went away. >>> >>> Anyways, this isn't a blocker but it seems to be weird logic that it >>> happens. >>> >>> Jeff >>> >>> [jrhammo@bowman-rps git]$ ./autogen.sh >>> >>> >>> #################################### >>> >>> ## Replicating confdb (and similar) >>> >>> #################################### >>> >>> >>> syncing 'src/mpl' --> 'src/pm/hydra/mpl' >>> >>> syncing 'confdb' --> 'src/mpi/romio/confdb' >>> >>> syncing 'confdb' --> 'src/mpl/confdb' >>> >>> syncing 'confdb' --> 'src/pm/hydra/confdb' >>> >>> syncing 'confdb' --> 'src/pm/hydra/mpl/confdb' >>> >>> syncing 'confdb' --> 'test/mpi/confdb' >>> >>> >>> #################################### >>> >>> ## Checking user environment >>> >>> #################################### >>> >>> >>> Verifying the location of autogen.sh... done >>> >>> Checking if autotools are in the same location... yes, all in >>> /storage/home_intel/jrhammo/TOOLS >>> >>> Checking for autoconf version... >= 2.67 >>> >>> Checking for automake version... >= 1.15 >>> >>> Checking for libtool version... bad libtool installation >>> >>> You either do not have libtool in your path or it is too old >>> >>> (version 2.4.3 or higher required). You may be able to use >>> >>> >>> libtool --version >>> >>> >>> Unfortunately, there is no standard format for the version output and >>> >>> it changes between autotools versions. In addition, some versions of >>> >>> autoconf choose among many versions and provide incorrect output). >>> >>> [jrhammo@bowman-rps git]$ libtool --version >>> >>> libtool (GNU libtool) 2.4.3 >>> >>> Written by Gordon Matzigkeit, 1996 >>> >>> >>> Copyright (C) 2014 Free Software Foundation, Inc. >>> >>> This is free software; see the source for copying conditions. There >>> is NO >>> >>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR >>> PURPOSE. >>> >>> >>> -- >>> Jeff Hammond >>> jeff.science(a)gmail.com <mailto:[email protected]> >>> http://jeffhammond.github.io/ >>> >>> >>> _______________________________________________ >>> To manage subscription options or unsubscribe: >>> https://lists.mpich.org/mailman/listinfo/devel >>> >> _______________________________________________ >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/devel >

1 0

Re: [mpich-devel] autogen.sh libtool version mismatch
by Rob Latham 10 Nov '15

10 Nov '15

On 11/10/2015 11:29 AM, Kenneth Raffenetti wrote: > Looks to be specific to the 2.4.3 tarball, which has an unexpected > LT_PACKAGE_VERSION (2.4.2.458.26-92994) in m4/ltversion.m4. We can > either put in a workaround or just bump the requirement in the next > release. > > Thanks for reporting. can you make 2.4.2.458.26-92994 the lowest working number or is that string too goofy to easily parse? ==rob > > Ken > > On 11/10/2015 08:54 AM, Jeff Hammond wrote: >> autogen.sh fails because it says I need "version 2.4.3 or higher >> required", but I have version 2.4.3 (see below). i upgraded to 2.4.6 >> and the problem went away. >> >> Anyways, this isn't a blocker but it seems to be weird logic that it >> happens. >> >> Jeff >> >> [jrhammo@bowman-rps git]$ ./autogen.sh >> >> >> #################################### >> >> ## Replicating confdb (and similar) >> >> #################################### >> >> >> syncing 'src/mpl' --> 'src/pm/hydra/mpl' >> >> syncing 'confdb' --> 'src/mpi/romio/confdb' >> >> syncing 'confdb' --> 'src/mpl/confdb' >> >> syncing 'confdb' --> 'src/pm/hydra/confdb' >> >> syncing 'confdb' --> 'src/pm/hydra/mpl/confdb' >> >> syncing 'confdb' --> 'test/mpi/confdb' >> >> >> #################################### >> >> ## Checking user environment >> >> #################################### >> >> >> Verifying the location of autogen.sh... done >> >> Checking if autotools are in the same location... yes, all in >> /storage/home_intel/jrhammo/TOOLS >> >> Checking for autoconf version... >= 2.67 >> >> Checking for automake version... >= 1.15 >> >> Checking for libtool version... bad libtool installation >> >> You either do not have libtool in your path or it is too old >> >> (version 2.4.3 or higher required). You may be able to use >> >> >> libtool --version >> >> >> Unfortunately, there is no standard format for the version output and >> >> it changes between autotools versions. In addition, some versions of >> >> autoconf choose among many versions and provide incorrect output). >> >> [jrhammo@bowman-rps git]$ libtool --version >> >> libtool (GNU libtool) 2.4.3 >> >> Written by Gordon Matzigkeit, 1996 >> >> >> Copyright (C) 2014 Free Software Foundation, Inc. >> >> This is free software; see the source for copying conditions. There >> is NO >> >> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR >> PURPOSE. >> >> >> -- >> Jeff Hammond >> jeff.science(a)gmail.com <mailto:[email protected]> >> http://jeffhammond.github.io/ >> >> >> _______________________________________________ >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/devel >> > _______________________________________________ > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/devel -- Rob Latham Mathematics and Computer Science Division Argonne National Lab, IL USA

1 0

Re: [mpich-devel] autogen.sh libtool version mismatch
by Jeff Hammond 10 Nov '15

10 Nov '15

Thanks. I'd just bump if were you. Patching for such a stupid thing doesn't make sense. Jeff Sent from my iPhone > On Nov 10, 2015, at 9:29 AM, Kenneth Raffenetti <raffenet(a)mcs.anl.gov> wrote: > > Looks to be specific to the 2.4.3 tarball, which has an unexpected LT_PACKAGE_VERSION (2.4.2.458.26-92994) in m4/ltversion.m4. We can either put in a workaround or just bump the requirement in the next release. > > Thanks for reporting. > > Ken > >> On 11/10/2015 08:54 AM, Jeff Hammond wrote: >> autogen.sh fails because it says I need "version 2.4.3 or higher >> required", but I have version 2.4.3 (see below). i upgraded to 2.4.6 >> and the problem went away. >> >> Anyways, this isn't a blocker but it seems to be weird logic that it >> happens. >> >> Jeff >> >> [jrhammo@bowman-rps git]$ ./autogen.sh >> >> >> #################################### >> >> ## Replicating confdb (and similar) >> >> #################################### >> >> >> syncing 'src/mpl' --> 'src/pm/hydra/mpl' >> >> syncing 'confdb' --> 'src/mpi/romio/confdb' >> >> syncing 'confdb' --> 'src/mpl/confdb' >> >> syncing 'confdb' --> 'src/pm/hydra/confdb' >> >> syncing 'confdb' --> 'src/pm/hydra/mpl/confdb' >> >> syncing 'confdb' --> 'test/mpi/confdb' >> >> >> #################################### >> >> ## Checking user environment >> >> #################################### >> >> >> Verifying the location of autogen.sh... done >> >> Checking if autotools are in the same location... yes, all in >> /storage/home_intel/jrhammo/TOOLS >> >> Checking for autoconf version... >= 2.67 >> >> Checking for automake version... >= 1.15 >> >> Checking for libtool version... bad libtool installation >> >> You either do not have libtool in your path or it is too old >> >> (version 2.4.3 or higher required). You may be able to use >> >> >> libtool --version >> >> >> Unfortunately, there is no standard format for the version output and >> >> it changes between autotools versions. In addition, some versions of >> >> autoconf choose among many versions and provide incorrect output). >> >> [jrhammo@bowman-rps git]$ libtool --version >> >> libtool (GNU libtool) 2.4.3 >> >> Written by Gordon Matzigkeit, 1996 >> >> >> Copyright (C) 2014 Free Software Foundation, Inc. >> >> This is free software; see the source for copying conditions. There is NO >> >> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. >> >> >> -- >> Jeff Hammond >> jeff.science(a)gmail.com <mailto:[email protected]> >> http://jeffhammond.github.io/ >> >> >> _______________________________________________ >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/devel > _______________________________________________ > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/devel

1 0

Re: [mpich-devel] autogen.sh libtool version mismatch
by Kenneth Raffenetti 10 Nov '15

10 Nov '15

Looks to be specific to the 2.4.3 tarball, which has an unexpected LT_PACKAGE_VERSION (2.4.2.458.26-92994) in m4/ltversion.m4. We can either put in a workaround or just bump the requirement in the next release. Thanks for reporting. Ken On 11/10/2015 08:54 AM, Jeff Hammond wrote: > autogen.sh fails because it says I need "version 2.4.3 or higher > required", but I have version 2.4.3 (see below). i upgraded to 2.4.6 > and the problem went away. > > Anyways, this isn't a blocker but it seems to be weird logic that it > happens. > > Jeff > > [jrhammo@bowman-rps git]$ ./autogen.sh > > > #################################### > > ## Replicating confdb (and similar) > > #################################### > > > syncing 'src/mpl' --> 'src/pm/hydra/mpl' > > syncing 'confdb' --> 'src/mpi/romio/confdb' > > syncing 'confdb' --> 'src/mpl/confdb' > > syncing 'confdb' --> 'src/pm/hydra/confdb' > > syncing 'confdb' --> 'src/pm/hydra/mpl/confdb' > > syncing 'confdb' --> 'test/mpi/confdb' > > > #################################### > > ## Checking user environment > > #################################### > > > Verifying the location of autogen.sh... done > > Checking if autotools are in the same location... yes, all in > /storage/home_intel/jrhammo/TOOLS > > Checking for autoconf version... >= 2.67 > > Checking for automake version... >= 1.15 > > Checking for libtool version... bad libtool installation > > You either do not have libtool in your path or it is too old > > (version 2.4.3 or higher required). You may be able to use > > > libtool --version > > > Unfortunately, there is no standard format for the version output and > > it changes between autotools versions. In addition, some versions of > > autoconf choose among many versions and provide incorrect output). > > [jrhammo@bowman-rps git]$ libtool --version > > libtool (GNU libtool) 2.4.3 > > Written by Gordon Matzigkeit, 1996 > > > Copyright (C) 2014 Free Software Foundation, Inc. > > This is free software; see the source for copying conditions. There is NO > > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > > > -- > Jeff Hammond > jeff.science(a)gmail.com <mailto:[email protected]> > http://jeffhammond.github.io/ > > > _______________________________________________ > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/devel >

1 0

autogen.sh libtool version mismatch
by Jeff Hammond 10 Nov '15

10 Nov '15

autogen.sh fails because it says I need "version 2.4.3 or higher required", but I have version 2.4.3 (see below). i upgraded to 2.4.6 and the problem went away. Anyways, this isn't a blocker but it seems to be weird logic that it happens. Jeff [jrhammo@bowman-rps git]$ ./autogen.sh #################################### ## Replicating confdb (and similar) #################################### syncing 'src/mpl' --> 'src/pm/hydra/mpl' syncing 'confdb' --> 'src/mpi/romio/confdb' syncing 'confdb' --> 'src/mpl/confdb' syncing 'confdb' --> 'src/pm/hydra/confdb' syncing 'confdb' --> 'src/pm/hydra/mpl/confdb' syncing 'confdb' --> 'test/mpi/confdb' #################################### ## Checking user environment #################################### Verifying the location of autogen.sh... done Checking if autotools are in the same location... yes, all in /storage/home_intel/jrhammo/TOOLS Checking for autoconf version... >= 2.67 Checking for automake version... >= 1.15 Checking for libtool version... bad libtool installation You either do not have libtool in your path or it is too old (version 2.4.3 or higher required). You may be able to use libtool --version Unfortunately, there is no standard format for the version output and it changes between autotools versions. In addition, some versions of autoconf choose among many versions and provide incorrect output). [jrhammo@bowman-rps git]$ libtool --version libtool (GNU libtool) 2.4.3 Written by Gordon Matzigkeit, 1996 Copyright (C) 2014 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -- Jeff Hammond jeff.science(a)gmail.com http://jeffhammond.github.io/

1 0