This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "MPICH primary repository". The branch, release/mpich-3.0.x has been updated via 45305a3a74fe8a4bb4667892ccebc9b2f15fbbc4 (commit) from 27dfcd8ecbeeb333b39c11ba04e52e26a6e1f58f (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://git.mpich.org/mpich.git/commitdiff/45305a3a74fe8a4bb4667892ccebc9b2f1... commit 45305a3a74fe8a4bb4667892ccebc9b2f15fbbc4 Author: Pavan Balaji <[email protected]> Date: Thu May 2 17:41:50 2013 -0500 Revert [8374bd7a] from mpich-3.0.x since that breaks ABI. No reviewer. diff --git a/configure.ac b/configure.ac index 6b7237c..35dc573 100644 --- a/configure.ac +++ b/configure.ac @@ -5783,25 +5783,6 @@ if test "$enable_f77" = yes -a -z "$MPI_STATUS_SIZE" ; then else AC_MSG_ERROR([MPI_STATUS_SIZE was not defined!]) fi - - # Because MPI_Status may contain C integers of different sizes - # and with different alignments, we determine the maximum element - # size and then tell Fortran to enforce maximal alignment. - # A more sophisticated test would determine the required alignment, - # rather than assuming alignment to maximum size - if test $MPI_SIZEOF_COUNT -gt $pac_cv_f77_sizeof_integer ; then - # Alignment test looks at the low address bits, as long - # as the sizeof(MPI_Count) is 2^j. - MPIR_COUNT_ALIGNMENT=0 - case $MPI_SIZEOF_COUNT in - 4) MPIR_COUNT_ALIGNMENT="0x3";; - 8) MPIR_COUNT_ALIGNMENT="0x7";; - 16) MPIR_COUNT_ALIGNMENT="0xF";; - *) MPIR_COUNT_ALIGNMENT=-1 ;; - esac - - AC_DEFINE_UNQUOTED([MPIR_COUNT_ALIGNMENT],[$MPIR_COUNT_ALIGNMENT],[Value that anded with an address will give 0 if the address is properly aligned for MPI_Count]) - fi fi AC_SUBST([MPI_STATUS_SIZE]) MPIF_STATUS_SIZE=$MPI_STATUS_SIZE diff --git a/src/binding/f77/buildiface b/src/binding/f77/buildiface index f6c6611..66ad07e 100755 --- a/src/binding/f77/buildiface +++ b/src/binding/f77/buildiface @@ -46,10 +46,6 @@ $do_fint = 0; # Set to 1 to support C and Fortran integers of a # different size $within_fint = 0; # This is set to 1 while generating code for the # do_fint branch -$fixStatusAlignment = 1; # Set to 1 to generate code that - # handles different alignment rules between - # Fortran (INTEGER) and C (likely MPI_Count) - # Note set by feature value do_fixstatus . %fintToHandle = ( 'int' => 1, 'MPI_Request' => 1, 'MPI_Group' => 1, 'MPI_Win' => 1, 'MPI_Info' => 1, 'MPI_Errhandler' => 1, 'MPI_File' => 1, 'MPI_Op' => 1, 'MPI_Message' => 1 ); @@ -72,7 +68,6 @@ $do_logical = 1; $do_weak = 1; $do_subdecls = 1; $do_bufptr = 1; -$do_fixstatus = 1; $prototype_file = "../../include/mpi.h.in"; # Global hashes used for definitions and to record the locations of the @@ -112,8 +107,8 @@ $specialInitString = "\ # Process arguments # # Args -# -feature={logical,fint,subdecls,weak,bufptr,fixstatus}, -# separated by :, value given by =on or =off, eg +# -feature={logical,fint,subdecls,weak,bufptr}, separated by :, value given +# by =on or =off, eg # -feature=logical=on:fint=off # The feature names mean: # logical - Fortran logicals are converted to/from C @@ -122,11 +117,6 @@ $specialInitString = "\ # weak - Use weak symbols # bufptr - Check for MPI_BOTTOM as a special address. This is # not needed if a POINTER declaration is available. -# fixstatus - The alignment of a Fortran STATUS array may not always -# be what is required in C (particularly with MPI_Count in -# MPI_Status now). If set, generate code to handle this case. -# Systems without alignment restrictions can set this to off, -# which will remove some tests. foreach $_ (@ARGV) { if (/-noprototypes/) { $build_prototypes = 0; } elsif (/-infile=(.*)/) { @@ -171,8 +161,6 @@ foreach $_ (@ARGV) { print STDERR "Unrecognized argument $_\n"; } } -# For now, make these equal. -$fixStatusAlignment = $do_fixstatus; # Note that the code that looks up values strips blanks out of the type name # No blanks should be used in the key. @@ -659,18 +647,18 @@ $fixStatusAlignment = $do_fixstatus; 'Testsome-2' => 'inout:handle_array:*v1:MPI_Request', 'Testsome-3' => 'out:fint2int', 'Testsome-4' => 'out:index_array:*v1:*v3', - 'Testsome-5' => 'out:status_array:*v1:*v3:*v3>0', + 'Testsome-5' => 'out:status_array:*v1:*v3:l3>0', 'Get_count' => '1', 'Get_count-1' => 'in:status', 'Request_get_status' => '2:3', 'Request_get_status-2' => 'out:logical', 'Request_get_status-3' => 'out:status', 'Status_set_cancelled' => '1:2', - 'Status_set_cancelled-1' => 'inout:status', + 'Status_set_cancelled-1' => 'in:status', 'Status_set_cancelled-2' => 'in:logical', 'Status_set_elements' => '1', - 'Status_set_elements-1' => 'inout:status', + 'Status_set_elements-1' => 'out:status', 'Status_set_elements_x' => '1', - 'Status_set_elements_x-1' => 'inout:status', + 'Status_set_elements_x-1' => 'out:status', 'Type_contiguous' => '2:3', 'Type_contiguous-2' => 'in:handle::MPI_Datatype', 'Type_contiguous-3' => 'out:handle::MPI_Datatype', @@ -1756,7 +1744,6 @@ sub bufptr_in_arg { sub bufptr_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; } # -------------------------------------------------------------------------- # MPI_IN_PLACE buffer pointers @@ -1776,7 +1763,6 @@ sub inplace_in_arg { sub inplace_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; } # -------------------------------------------------------------------------- # MPI_UNWEIGHTED pointers. Note that unweighted is only used to indicate @@ -1853,7 +1839,6 @@ sub unweighted_out_arg { sub unweighted_out_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; if ($within_fint) { # MPI_WEIGHTS_EMPTY should never be an output value from the MPI library @@ -1892,7 +1877,6 @@ sub logical_in_arg { sub logical_out_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; if ($do_logical) { print $OUTFD " if ($errparmlval == MPI_SUCCESS) *$outvar = MPIR_TO_FLOG($coutvar);\n"; } @@ -1956,7 +1940,6 @@ sub logical_array_in_arg { sub logical_array_out_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; # Special case if MPI_Fint == int: we use the input variable # for space. my $ActSize = $Array_size; @@ -2001,7 +1984,6 @@ sub index_ftoc { sub index_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; print $OUTFD " *$outvar = (MPI_Fint)$coutvar;\n"; print $OUTFD " if ($coutvar >= 0) *$outvar = *$outvar + 1;\n"; } @@ -2028,7 +2010,6 @@ sub index_array_out_ftoc { sub index_array_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; my $ActSize = $Array_size; # In the case where the input and out sizes are not the same, # the output size is in the fourth argument. @@ -2101,7 +2082,6 @@ sub handle_inout_ftoc { sub handle_out_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; if ($within_fint) { print $OUTFD " if ($errparmlval==MPI_SUCCESS) *$outvar = (MPI_Fint)$coutvar;\n"; } @@ -2224,8 +2204,7 @@ sub handle_array_out_ftoc { sub handle_array_inout_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; - &handle_array_ctof( $coutvar, $outvar, $count ); + &handle_array_ctof( $coutvar, $outvar ); } # Make sure that there is no output processing (other than to free the @@ -2233,14 +2212,12 @@ sub handle_array_inout_ctof { sub handle_array_in_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; - #&handle_array_ctof( $coutvar, $outvar, $count ); + #&handle_array_ctof( $coutvar, $outvar ); } sub handle_array_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; if ($within_fint) { my $basetype = $nativeType; $basetype =~ s/MPI_//; @@ -2251,7 +2228,7 @@ sub handle_array_ctof { $asize = "_csize"; } print $OUTFD "\ - /* handle_array_ctof( $coutvar, $outvar, $count ) */ + /* handle_array_ctof( $coutvar, $outvar ) */ {int li; for (li=0; li<$asize; li++) { $outvar\[li\] = $convfunc( $coutvar\[li\] ); @@ -2359,7 +2336,6 @@ sub addrint_in_arg { sub attrint_ctof { my $fvar = $_[0]; my $cvar = $_[1]; - my $count = $_[2]; my $flagarg = 4; # get from option # The strange cast is due to the following: # The MPICH attribute code returns an int in the void *. In @@ -2416,7 +2392,6 @@ sub addraint_in_arg { sub attraint_ctof { my $fvar = $_[0]; my $cvar = $_[1]; - my $count = $_[2]; my $flagarg = 4; # get from option print $OUTFD " if ((int)*ierr || !l$flagarg) { @@ -2454,7 +2429,6 @@ sub bufaddr_out_arg { sub bufaddr_ctof { my $fvar = $_[0]; my $cvar = $_[1]; - my $count = $_[2]; } # -------------------------------------------------------------------------- # @@ -2475,10 +2449,6 @@ sub status_out_fnulltoc { if (v$count == MPI_F_STATUS_IGNORE) { l$count = MPI_STATUS_IGNORE; } else { l$count->MPI_ERROR = (int)(v$count\[2\]); }\n"; } - elsif ($fixStatusAlignment) { - print $OUTFD "\ - if (v$count == MPI_F_STATUS_IGNORE) { l$count = MPI_STATUS_IGNORE; }\n"; - } else { print $OUTFD "\ if (v$count == MPI_F_STATUS_IGNORE) { v$count = (MPI_Fint*)MPI_STATUS_IGNORE; }\n"; @@ -2490,26 +2460,11 @@ sub status_in_ftoc { if ($within_fint) { print $OUTFD " MPI_Status_f2c( v$count, l$count );\n"; } - elsif ($fixStatusAlignment) { - print $OUTFD "\ - if ( l$count != MPI_STATUS_IGNORE && - (((MPI_Aint)v$count) & MPIR_COUNT_ALIGNMENT) == 0 ) - l$count = (MPI_Status *)(void*)v$count; - else { - MPI_Status_f2c( v$count, l$count ); - } -"; - } -} -sub status_inout_ftoc { - my $count = $_[0]; - status_in_ftoc( $count ); } sub status_out_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; if ($within_fint) { my $testFlag = ""; if (defined($condition) && $condition ne "") { @@ -2518,50 +2473,24 @@ sub status_out_ctof { print $OUTFD " if ($testFlag$coutvar != MPI_STATUS_IGNORE && $errparmlval == MPI_SUCCESS) { MPI_Status_c2f($coutvar,$outvar); - }\n"; - } - elsif ($fixStatusAlignment) { - # only copy if Fortran is not properly aligned - print $OUTFD "\ - if ($coutvar != MPI_STATUS_IGNORE && $errparmlval == MPI_SUCCESS && $outvar != (MPI_Fint*)$coutvar) { - MPI_Status_c2f($coutvar,$outvar); - }\n"; + }\n" } } sub status_in_decl { my $count = $_[0]; - if ($within_fint || $fixStatusAlignment) { + if ($within_fint) { print $OUTFD " MPI_Status vtmp$count, *l$count = &vtmp$count;\n"; } } sub status_out_decl { my $count = $_[0]; - if ($within_fint || $fixStatusAlignment) { - print $OUTFD " MPI_Status vtmp$count, *l$count = &vtmp$count;\n"; - } -} -sub status_inout_decl { - my $count = $_[0]; - if ($within_fint || $fixStatusAlignment) { + if ($within_fint) { print $OUTFD " MPI_Status vtmp$count, *l$count = &vtmp$count;\n"; } } -sub status_out_ftoc { - my $count = $_[0]; - if ($fixStatusAlignment) { - # The first (void *) cast helps suppress compiler warnings about - # casting to a pointer with greater alignment (and which the - # specific runtime check is used to ensure the alignments are - # ok). - print $OUTFD "\ - if (l$count != MPI_STATUS_IGNORE && - (((MPI_Aint)v$count) & MPIR_COUNT_ALIGNMENT) == 0) - l$count = (MPI_Status*)(void *)v$count;\n"; - } -} sub status_out_arg { my $count = $_[0]; - if ($within_fint|| $fixStatusAlignment) { + if ($within_fint) { print $OUTFD "l$count"; } else { @@ -2570,16 +2499,7 @@ sub status_out_arg { } sub status_in_arg { my $count = $_[0]; - if ($within_fint || $fixStatusAlignment) { - print $OUTFD "l$count"; - } - else { - print $OUTFD "(MPI_Status *)(v$count)"; - } -} -sub status_inout_arg { - my $count = $_[0]; - if ($within_fint || $fixStatusAlignment) { + if ($within_fint) { print $OUTFD "l$count"; } else { @@ -2629,7 +2549,6 @@ sub errcodesignore_out_ftoc { sub errcodesignore_out_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; if ($within_fint) { $asize = $Array_size; @@ -2673,7 +2592,7 @@ sub status_array_out_fnulltoc { &specialInitStatement( $OUTFD ); my $varname = "v"; my $varcast = "(MPI_Fint *)"; - if ($within_fint || $fixStatusAlignment) { $varname = "l"; $varcast = ""; } + if ($within_fint) { $varname = "l"; $varcast = ""; } print $OUTFD "\ if (v$count == MPI_F_STATUSES_IGNORE) { $varname$count = ${varcast}MPI_STATUSES_IGNORE; }\n"; } @@ -2683,23 +2602,11 @@ sub status_array_out_ftoc { if ($within_fint) { print $OUTFD " if (l$count != MPI_STATUSES_IGNORE) { l$count = (MPI_Status*)$malloc($Array_size * sizeof(MPI_Status)); }\n"; } - elsif ($fixStatusAlignment) { - print $OUTFD "\ - if (l$count != MPI_STATUSES_IGNORE) { - if( (((MPI_Aint)v$count) & MPIR_COUNT_ALIGNMENT) == 0) - l$count = (MPI_Status*)(void *)v$count; - else { - lalloc$count = 1; - l$count = (MPI_Status*)$malloc($Array_size * sizeof(MPI_Status)); - } - }\n"; - } } sub status_array_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; if ($within_fint) { my $ActSize = $Array_size; @@ -2719,38 +2626,17 @@ sub status_array_ctof { }\n"; $clean_up .= " if ($coutvar != MPI_STATUSES_IGNORE) { $free($coutvar); }\n"; } - elsif ($fixStatusAlignment) { - my $ActSize = $Array_size; - if (defined($nativeType) && $nativeType ne "") { - $ActSize = $nativeType; - } - my $testFlag = ""; - if (defined($condition) && $condition ne "") { - $testFlag = "$condition && " - } - print $OUTFD -" if (${testFlag}lalloc$count) { - int li; - for (li=0; li<$ActSize; li++) { - MPI_Status_c2f($coutvar+li,$outvar+li*5); - } - }\n"; - $clean_up .= " if (lalloc$count) { $free($coutvar); }\n"; - } } sub status_array_out_decl { my $count = $_[0]; if ($within_fint) { print $OUTFD " MPI_Status *l$count=0;\n"; - } - elsif ($fixStatusAlignment) { - print $OUTFD " MPI_Status *l$count=0;\n int lalloc$count=0;\n"; } } sub status_array_out_arg { my $count = $_[0]; - if ($within_fint || $fixStatusAlignment) { + if ($within_fint) { print $OUTFD "l$count"; } else { @@ -2762,7 +2648,6 @@ sub status_array_out_arg { sub aintToInt_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; print $OUTFD " if ($errparmlval == MPI_SUCCESS) *$outvar = (MPI_Fint)($coutvar);\n"; } sub aintToInt_out_decl { @@ -2800,7 +2685,6 @@ sub fint2int_ftoc { sub fint2int_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; if ($within_fint) { print $OUTFD " if ($errparmlval == MPI_SUCCESS) *$outvar = (MPI_Fint)$coutvar;\n"; } @@ -2916,7 +2800,6 @@ sub fint2int_array_out_ftoc { sub fint2int_array_out_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; if ($within_fint) { my $asize = $Array_size; if ($Array_size =~ /_commsize/) { @@ -3150,16 +3033,16 @@ sub print_post_call { $processing_routine = "${method}_${direction}_ctof"; # Prefer a specific choice matching the direction if (defined(&$processing_routine)) { - &$processing_routine( "l$count", "v$count", $count ); + &$processing_routine( "l$count", "v$count" ); } elsif ($direction eq "inout" && defined(&$processing_out_routine)) { - &$processing_out_routine( "l$count", "v$count", $count ); + &$processing_out_routine( "l$count", "v$count" ); } else { $processing_routine = "${method}_ctof"; if (defined(&$processing_routine)) { - &$processing_routine( "l$count", "v$count", $count ); + &$processing_routine( "l$count", "v$count" ); } elsif ($direction ne "in") { print STDERR "Missing $processing_routine for $routine_name\n"; @@ -3207,7 +3090,6 @@ sub blankpad_out_ftoc { sub blankpad_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; # find the null character. Replace with blanks from there to the # end of the string. The declared lenght is given by a variable @@ -3250,7 +3132,6 @@ sub blankpadonflag_out_ftoc { sub blankpadonflag_ctof { my $coutvar = $_[0]; my $outvar = $_[1]; - my $count = $_[2]; # find the null character. Replace with blanks from there to the # end of the string. The declared lenght is given by a variable @@ -3574,7 +3455,6 @@ sub intToAintArr_in_arg { sub intToAintArr_in_ctof { my $lname = $_[0]; my $vname = $_[1]; - my $count = $_[2]; print $OUTFD " #ifdef HAVE_AINT_LARGER_THAN_FINT if ($lname) { $free($lname); } @@ -3620,7 +3500,6 @@ sub FileToFint_out_decl { sub FileToFint_ctof { my $lvar = $_[0]; my $gvar = $_[1]; - my $count = $_[2]; print $OUTFD " *$gvar = MPI_File_c2f($lvar);\n"; } sub FileToFint_out_arg { @@ -4636,7 +4515,6 @@ print $OUTFD "\ return MPIR_Err_return_comm( 0, \"MPI_Status_f2c\", mpi_errno ); }\n"; if ($do_fint) { - #FIXME: Invalid alignment assumptions on MPI_Count field. print $OUTFD "\ #ifdef HAVE_FINT_IS_INT *c_status = *(MPI_Status *) f_status; @@ -4675,11 +4553,7 @@ print $OUTFD "\ #include \"mpi_fortimpl.h\" /* mpierrs.h and mpierror.h for the error code creation */ #include \"mpierrs.h\" -#include <stdio.h>\n"; - if ($fixStatusAlignment) { - print $OUTFD "#include <string.h>\n"; - } - print $OUTFD "\ +#include <stdio.h> #include \"mpierror.h\" /* -- Begin Profiling Symbol Block for routine MPI_Status_c2f */ @@ -4715,8 +4589,6 @@ int MPI_Status_c2f( const MPI_Status *c_status, MPI_Fint *f_status ) return MPIR_Err_return_comm( 0, \"MPI_Status_c2f\", mpi_errno ); }\n"; if ($do_fint) { - #FIXME: Copy to f_status of MPI_Count data makes invalid alignment - # data. print $OUTFD "\ #ifdef HAVE_FINT_IS_INT *(MPI_Status *)f_status = *c_status; @@ -4729,24 +4601,14 @@ int MPI_Status_c2f( const MPI_Status *c_status, MPI_Fint *f_status ) #endif\n"; } else { - if ($fixStatusAlignment) { - # Within this routine, MPI_STATUS_IGNORE is invalid - print $OUTFD "\ - if ( (((MPI_Aint)f_status) & MPIR_COUNT_ALIGNMENT) == 0 ) - *(MPI_Status*)(void *)f_status = *c_status; - else - memcpy(f_status,c_status,sizeof(MPI_Status)); - \n"; - } - else { - print $OUTFD " *(MPI_Status *)f_status = *c_status;\n"; - } + print $OUTFD " *(MPI_Status *)f_status = *c_status;\n"; } print $OUTFD " return MPI_SUCCESS; }\n"; close ($OUTFD); &ReplaceIfDifferent( $filename, $filename . ".new" ); + } sub print_mpif_int { ----------------------------------------------------------------------- Summary of changes: configure.ac | 19 ----- src/binding/f77/buildiface | 182 +++++-------------------------------------- 2 files changed, 22 insertions(+), 179 deletions(-) hooks/post-receive -- MPICH primary repository